What is C12000 copper?
UNS C12000 copper is a phosphorus-deoxidized copper with a moderate residual phosphorus content. It exhibits good electrical conductivity and excellent weldability and brazing properties, and can be hot-formed or cold-formed. UNS C12000 copper has an IACS conductivity of 95%, low residual phosphorus content, and high resistance to brittleness. The forging temperature of UNS C12000 copper is approximately 760 to 871 degrees Celsius (1400 to 1600 degrees Fahrenheit). C12000 copper tubing has good forging properties, low machinability, and excellent hot and cold working properties.
UNS C12000 copper tubing is widely used in heat exchangers, radiators, coolers, electric heating elements, air conditioners, refrigerators, oil pipelines, brake lines, water pipes, gas pipelines, busbars, and electromechanical hardware connectors.
We provide TP1/C12000 copper pipes
Inquire about C12000 Tube Pricing & Samples
Specifications of Copper C12000 Tubes
| Standard | ASTM B111 / ASTM B75 / ASTM B280 / ASTM B68 / ASME SB111 / ASME SB75 / ASME SB280 / ASME SB68 |
|---|---|
| Material | Copper |
| Outer Diameter(OD) | 4mm-150mm |
| Wall Thickness : | 0.25mm-8mm |
| Length | 1 meter-6 meter or as required |
| Types | Seamless Pipes, Tube / Light Drawn Tube / Light Annealed Tube / Bright Tube / Annealed Tube, Annealed Tube, Full Annealed Tube, Hard Drawn Tubes |
| Application | 1. Pancake Coil for ACR, General Engineering Applications 2. LWC Coil for ACR, General Engineering Applications 3. Straight Copper Tubes for ACR and Refrigeration 4. Inner-grooved copper tube for ACR and Refrigeration 5. Copper Pipe for Transportation System of water, gas and oil 6. Semi-finished Copper tube for industrial applications |
Copper C12000 Tubes Chemical Composition
| Grade | Cu | Ph |
| C12000 | Including Ag | 0.004 - 0.012 |
Copper C12000 Tubes Mechanical Properties
| Density (lb / cu. in.) | Electrical Resistivity (microhm-cm (at 68 Deg F)) | Melting Point (Deg F) | Mean Coeff Thermal Expansion | Modulus of Elasticity Tension |
| 0.323 | 10.6 | 1981 | 9.4 | 17000 |
Copper C12000 Tube Temper
| Copper Tube ASTM B280 C12000 O50 Tube | Copper C12000 O50 Tube |
| ASTM B111 Copper C12000 O50 Tube | ASTM B68 Copper C12000 O50 Tube |
| ASTM B68 Copper C12000 O60 Tube | ASTM B280 Copper C12000 O60 Tube |
| Copper Tube ASTM B111 C12000 H55 Tube | Copper Tube ASTM B68 C12000 H55 Tube |
| Copper Tube HRF50 | ASTM B111 Copper C12000 HRF50 Tube |
| ASTM B68 Copper C12000 HRF50 Tube | ASTM B280 Copper C12000 HRF50 Tube |
| ASTM B280 Copper C12000 O50 Tube | Copper O50 TEMPER Tubes |
| Copper Tube O50 | Copper Tube ASTM B111 C12000 O60 Tube |
| Copper Tube ASTM B280 C12000 H55 Tube | Copper C12000 H55 Tube |
| Copper H55 TEMPER Tubes | Copper Tube H55 |
| Copper 061 TEMPER Tubes | Copper Tube 061 |
| Copper Tube H80 | ASTM B111 Copper C12000 H80 Tube |
| ASTM B68 Copper C12000 H80 Tube | ASTM B280 Copper C12000 H80 Tube |
| Copper Tube ASTM B111 C12000 061 Tube | Copper Tube ASTM B68 C12000 061 Tube |
| Copper Tube ASTM B280 C12000 061 Tube | Copper C12000 061 Tube |
| ASTM B111 Copper C12000 061 Tube | ASTM B68 Copper C12000 061 Tube |
| ASTM B280 Copper C12000 061 Tube | Copper Tube ASTM B111 C12000 HRF40 Tube |
| Copper Tube ASTM B68 C12000 HRF40 Tube | Copper Tube ASTM B280 C12000 HRF40 Tube |
Application Industries for Copper C12000 Tubes
HVAC Industry
Electrical Industry
Plumbing Sanitary Ware Industry
MGPS Industry
Constructions Industry
Automobiles Industry
Water & Gas Industry
Electrical Engineering Industry
Marine Engineering Industry
Earthing Systems Industry
FAQ
Q: What standards cover C12000 copper tubes?
A: ASTM B75 (seamless), B280 (ACR tubes), EN 12735-1, and JIS H3300 are key standards for tubing. ASTM B152 covers sheet/plate forms.
Q: What tempers are available for C12000 tubing?
A: Common tempers are annealed (soft, O60), drawn (hard, H58), and light-drawn (H55). Annealed offers maximum formability; drawn provides higher strength.
Q: Can C12000 be used in oxygen service or medical gas systems?
A: Yes, after proper cleaning and degreasing, C12000 tubes are widely used in medical gas (oxygen, nitrous oxide) and high-purity gas systems due to their cleanliness and non-permeability.
Q: How does phosphorus affect conductivity in C12000?
A: The low residual phosphorus slightly reduces electrical conductivity (~85% IACS) compared to pure C11000 (~101% IACS), but it remains excellent for most thermal and electrical applications.
Q: Is C12000 susceptible to stress corrosion cracking (SCC)?
A: Copper alloys are generally less prone to SCC than brasses, but in environments with ammonia, amines, or nitrites, SCC can occur. Proper design and avoiding sustained tensile stress in such environments are recommended.
Check Today's Stock & Lead Time
Dimensional Range Table
In plumbing and HVAC standards, copper tubing is commonly classified into three main types based on wall thickness: Type K, Type L, and Type M.
Type K: Has the thickest wall. It is the strongest and most durable, primarily used for underground burial, high-pressure applications, and where the highest level of protection is required.
Type L: Has a medium wall thickness. It is the most common and versatile type, widely used for residential and commercial water supply lines (hot and cold) and for many HVAC applications.
Type M: Has the thinnest wall. It is suitable for above-ground, low-pressure residential water supply lines and some drainage applications, offering a cost-effective solution where conditions allow.
The outside diameter (OD) is the same for all three types within a given nominal size. The difference lies in the inner diameter (ID), which decreases as the wall gets thicker.
| Nominal Size (inches) | Type K | Type L | Type M |
|---|---|---|---|
| Outside Diameter (OD) | Same for all types | ||
| Wall Thickness | Thickest | Medium | Thinnest |
| Inside Diameter (ID) | Smallest | Medium | Largest |
| 1/2" | OD: 0.625" ID: 0.527" Wall: 0.049" |
OD: 0.625" ID: 0.545" Wall: 0.040" |
OD: 0.625" ID: 0.569" Wall: 0.028" |
| 3/4" | OD: 0.875" ID: 0.745" Wall: 0.065" |
OD: 0.875" ID: 0.785" Wall: 0.045" |
OD: 0.875" ID: 0.811" Wall: 0.032" |
| 1" | OD: 1.125" ID: 0.995" Wall: 0.065" |
OD: 1.125" ID: 1.025" Wall: 0.050" |
OD: 1.125" ID: 1.055" Wall: 0.035" |
Our factory
We provide a full range of copper products-rods, tubes, plates, bars, wires, and strips-tailored to international specifications including ASTM, BS, and JIS. Our manufacturing capabilities feature horizontal continuous casting for large-diameter bars, rotary piercing mills for high-precision tubes, and multi-roll finishing mills for ultra-thin strips. To ensure superior quality, we implement comprehensive testing protocols: chemical analysis via XRF, mechanical property verification on universal testing machines, and non-destructive testing (ultrasonic and eddy current) for internal and surface integrity. With integrated production, rigorous inspection, and flexible customization, we deliver high-performance copper materials for electrical, HVAC, machinery, and construction industries worldwide.




Get Fast Quote & Logistics Plan














