Copper C102 has excellent electrical and thermal conductivity, making it an ideal material for electronic components. Its great resistance to corrosion makes it an optimal choice for a wide assortment of applications in environments where moisture, humidity, or extreme temperatures are present. This versatile alloy can easily be hard or soft-soldered, making it one of the most sought-after materials by electrical engineers and electronics manufacturers. UNS C10200 is often considered a go-to material when designing and constructing products such as telecommunications equipment, home appliances, motor components, power distribution systems, and even in the aerospace industry.
Copper C102 is a copper alloy containing 99.95% copper and .05% oxygen. This alloy is known for its excellent electrical conductivity and solderability. It also has good strength and ductility properties, making it ideal for various applications.
(Weight %)
| Cu* | Pb | Zn | Fe | P | Ag | As | O2 | Sb | Te | |
|---|---|---|---|---|---|---|---|---|---|---|
| Min | 99.95 | |||||||||
| Max | 0.0010 |
Copper C10200 has a high ductility and strength-to-weight ratio, making it suitable for various applications. Its tensile strength is greater than 20 ksi, while its yield strength ranges from 10-15 ksi. It also has an elongation rate greater than 40%. The hardness rating for this alloy is 55-65 Rockwell B (RB).
The density of copper Alloy C102 is 8.9 g/cm3, with a melting point between 1083°C – 1150°C (1981°F – 2102°F). This alloy has excellent thermal and electrical conductivity due to its high copper content. It also has good corrosion resistance properties, making it ideal for various applications.
Due to its excellent electrical and thermal conductivity, this alloy is often used in electrical components such as circuit boards, connectors, and switches. Due to its corrosion resistance properties, it can also be used in plumbing fixtures and electronic devices such as TVs and computers. Additionally, the C10200 Alloy can be used in automotive parts such as brake systems because of its strength and durability at higher temperatures.
Copper C102 has excellent corrosion resistance properties, making it ideal for indoor and outdoor use where exposure to moisture or other corrosive elements may occur. It can resist most common acids except hydrochloric or nitric acid at concentrations over 5%.
Copper C102 can maintain good mechanical performance up to 500°C (932°F), making it suitable for some high-temperature applications such as furnace components or heating elements where other alloys may not be able to withstand the heat without becoming brittle or losing their strength properties over time.
C102 Copper Material does not require any additional heat treatment after fabrication since it already possesses the required mechanical properties without being exposed to additional heat treatments such as annealing or quenching processes before use in most applications where this type of alloy would be beneficial. However, there are certain cases where these processes may need to be completed depending on the application requirements; therefore, consulting with an expert before use is recommended if uncertain about what kind of heat treatments should be performed on the material before use.
C102Machining Alloy c1012 requires special tools due to its high hardness rating. However, it can still be done with regular machine shop tools if extra care is taken during operations, such as drilling or tapping threads into the material surface area when fastening parts together using bolts or screws made from either stainless steel or brass hardware instead of aluminum hardware which might corrode over time due to contact with this type of material's surfaces during assembly procedures like welding, etc.
