Nov 16, 2026 Leave a message

C70600 Copper-Nickel Prices — Week Of November 16, 2026

What Is C70600 Copper-Nickel?

C70600 (90/10 copper-nickel, UNS C70600) is 88.6% copper, 10% nickel, 1.4% iron by allocation - the workhorse alloy for seawater service: condenser tubes, ship seawater lines and desalination pipework - see our copper-nickel pipe and copper-nickel tube ranges. The 10% nickel is not there for strength; it and the controlled iron are what build the adherent, self-repairing oxide film that resists flowing seawater. Drop the iron below 0.15% and the film stops self-repairing - which is why the mill certificate's iron line matters as much as the nickel line. It is the cheapest of the three commercial Cu-Ni grades per pound, and the only one where the alloy premium over C11000 is small enough that the nickel hedge inside it is a real line item.

 

Price Snapshot - The Market Background

Copper went nowhere: LME settled at $14,190/tonne ($6.44/lb), down 0.5%, and the cathode premium held near $0.098/lb. Nickel kept climbing - the leg that was $0.761/lb in early October is now $0.841, +10.5% in six weeks - and the iron/manganese legs are noise. Net effect: C70600 melt $6.561/lb, while C11000 melt eased to about $6.46/lb. The alloy premium over straight copper widened from $0.11 to $0.14 in a single week on nickel alone.

news-883-470

 

Table 1 - C70600 price snapshot, week of November 16, 2026
Item Value Unit Weekly move Why it matters
C70600 melt value 6.561 USD / lb +0.022 / +0.34% First rise in six weeks
Copper leg (LME 14,190) 5.702 USD / lb −0.010 Flat - not the driver
Nickel leg 0.841 USD / lb +0.019 104% of the move
C70600 tube, seamless (ASTM B466) 8.61 USD / kg +0.06 / +0.70% Passed nickel through within the week
C70600 plate (ASTM B171) 10.38 USD / kg +0.06 / +0.58% Hot-rolled book full
C70600 bar (ASTM B151) 10.85 USD / kg +0.06 / +0.56% Smallest lots, slowest to discount
Melt premium over C11000 +0.14 USD / lb from +0.11 Nickel-only widening

Melt = Cu×0.886 + Ni×0.10 + Fe×0.018 + Mn×0.01. Form prices include conversion and mill margin.

 

What A C70600 Quote Is Actually Made Of

On a 2-tonne seamless tube release at $8.61/kg, the metal is $5.24/kg - 61% of the price and the only line that never amortises. Conversion ($1.86/kg), certification and testing ($0.44 at 500 kg → $0.22 at 10 t), packaging ($0.38 → $0.26) and margin do shrink with volume: the whole ladder runs $9.03/kg at 500 kg, $8.61 at 2 t, $8.42 at 10 t. The 7% between the ends is real - but only the metal lines carry nickel risk, which is exactly where the quote conversation should go.

news-876-469

 

How To Buy The Nickel Leg Instead Of Absorbing It

Most RFQs say "price valid 30 days" and stop. With the nickel leg at $0.841 and rising, what happens after day 30 is a bigger number than the negotiation before it. Three clause structures on the same 2 t release, costed over a 16-week fulfilment window with nickel at +6%:

 

Table 2 - Nickel exposure by clause structure (2 t seamless tube, 16 weeks)
Clause Quote today Exposure Cost if Ni +6% Who owns it
Fixed price, 30-day validity, re-quote after $8.61/kg Re-quote at day 31 $8.74/kg (+$260) plus re-quote fee Buyer
Split leg: copper on LME+, nickel fixed quarterly $8.61/kg Copper leg only $8.64/kg (+$60) Shared, capped
Material at time of shipment, open $8.44/kg looks cheaper Full metal leg $8.86/kg (+$900) incl. 3% "handling" Buyer, uncapped

The third clause is the one to watch: it prints a lower number today - $0.17/kg under the fixed quote - and hands the buyer the entire metal leg plus a 3% handling charge for the privilege. At current nickel momentum that clause costs more than it saves within nine weeks. The split-leg structure is the only one where the nickel number is capped and the copper number is transparent; ask for the nickel leg as a fixed USD figure per pound, stated on the quote, not buried in "metal at market".

 

Choosing Between C70600, C71500, C71640 And C72200

news-877-473

Table 3 - Seawater Cu-Ni grades compared, week of November 16
Grade Melt (USD/lb) vs Nov 2 Ni share When it earns the premium
C70600 (90/10) 6.561 +0.34% ~13% Default: seawater lines to 3 m/s, desal condensers
C72200 6.814 +0.35% ~17% Chromium-bearing: higher velocity, splash zones
C71500 (70/30) 6.925 +0.36% ~30% Higher pressure, more fouling-prone service
C71640 7.063 +0.36% ~31% Iron-boosted 70/30: fast-flow seawater pumps
C11000 (ref.) 6.44 −0.7% 0% Not a seawater alloy - cheapest quote that fails

The 70/30 premium over 90/10 is $0.36/lb of melt - about $0.55/kg on tube - and every week it is paid without a velocity or pressure reason, it is budget the film never needed. This week that premium widened again on nickel alone, so every 70/30 RFQ that cites C70600's service conditions is paying a 30% nickel tax for a 10% nickel job.

 

Four Lines To Check On The Mill Certificate

Iron: 0.15–0.50% - below 0.15% the protective film stops self-repairing; require the actual value, not a pass.

Nickel: 9.5–10.5% - the exact window the price and the corrosion performance both assume.

Manganese: 0.30–1.0% - scavenges sulphur; high-sulphur heats show pitting within the first haul-out.

Lead: 0.05 max - and for welded line pipe, require weld-decay testing or an eddy-current report on the seam.

 

What Is The C70600 Equivalent Grades Map?

The purchase order should carry UNS C70600; the equivalents below decide which certificate and which test plan arrive with the heat.

Table 4 - C70600 equivalent designations
System Designation Notes
UNS C70600 The universal key - put it on the RFQ
ASTM B466 (tube), B171 (plate), B151 (bar), B122 (sheet/strip), B467 (pipe) B466 adds eddy-current or hydrostatic
ASME SB-466 / SB-171 / SB-151 Section II documentation for coded vessels
EN / DIN CuNi10Fe1Mn1 (2.0872) Same chemistry; EN 10204 3.1 default
ISO CuNi10Fe1Mn1 Marine piping standard route
JIS C7060 (H3300) Tube and plate ranges differ - quote the symbol
GB / China B10 / T70600 (GB/T 5231) Close; require actual Ni, Fe, Mn values
AWS filler CuNi-1 / ERCuNi (A5.7) Correct filler for 90/10 - not CuNi-2

The trap that costs rejections: quoting B171 plate against a B466 tube RFQ, or CuNi30Fe (2.0882) chemistry against a 90/10 drawing - the 70/30 certificate passes every NDT check and fails the drawing, and it costs $0.36/lb more for the privilege.

 

Volume Breaks, Lead Time And The RFQ Lines That Cost Nothing

Volume: the ladder ends at 10 t - tube $9.03 → $8.42/kg. Above 10 t, nothing amortises further; negotiate metal timing, not conversion.

Lead time: seamless tube 7–10 weeks; plate 6–8; bar 5–7; fittings 8–12. Queue at the hot-rolling mill is the constraint, not melt supply.

Write into every RFQ: "actual values for Ni, Fe, Mn, Pb on the EN 10204 3.1 certificate", "nickel leg stated as fixed USD/lb on the quote", and UNS C70600 beside the grade name.

Fix ten-day quote validity and a re-opener threshold of ±3% on the nickel leg only - copper moves are visible and small; nickel moves are neither.

 

Three Decisions Worth Money This Week

Reject the open "material at shipment" clause. It looks $0.17/kg cheaper and costs ~$900 on a 2 t release if nickel keeps its six-week trend. Take the split-leg quote or the fixed quote with a nickel cap.

Audit 70/30 drawings against 90/10 service. With the gap at $0.55/kg on tube, any line rated for the conditions C70600 handles is budget returned - a 6 km seawater piping package can release five figures.

Book Q1 melt slots now, price later. Nickel momentum and a full hot-rolling queue both point the same way; holding the slot at booking fee beats re-quoting at a wider premium.

 

Where These Numbers Could Reverse

Nickel stalls, the melt flat-lines within a fortnight - the copper leg is drifting lower and only the nickel leg has been holding C70600 up.

Copper breaking $14,000/tonne pulls every grade down together - and widens the C11000-vs-C70600 conversation the other way, in the buyer's favour.

The hot-rolling queue clearing is the discount signal worth watching - conversion, not metal, is where the next real price relief lives.

 

C70600 Product Range And Specifications

Table 5 - C70600 product range
Product Standard Range Condition
Copper-nickel tube, seamless ASTM B466 / ASME SB-466 OD 6–219 mm; wall 0.5–10 mm; to 12,000 mm Annealed; bright annealed for condenser duty
Copper-nickel pipe ASTM B467 NPS 1/8–12; sch 10–80 Welded, annealed
Copper-nickel plate ASTM B171 / ASME SB-171 3–60 mm; width to 1,250 mm Hot-rolled, annealed, pickled
Copper-nickel bar / rod ASTM B151 Ø 6–120 mm; hex & square on request Hot-rolled, turned or ground
Copper-nickel sheet / strip ASTM B122 0.3–12 mm; width to 600 mm Cold-rolled, annealed
Fittings Flanges, elbows, tees to B466 To NPS 12 Machined from plate or forged block
Melting & testing Induction melt, hot and cold working; EN 10204 3.1 standard, 3.2 with witness available; interstitial-style full analysis (Ni, Fe, Mn, Pb actual values); eddy current or hydrostatic on B466

Buying C70600 this quarter? Send the line list and annual quantity and we will quote copper leg and nickel leg as separate, stated USD figures - with actual Ni, Fe, Mn and Pb values on every EN 10204 3.1 certificate and the melt slot booked at purchase order. Tube, plate, bar, sheet, pipe and fittings, ASTM B466 / B171 / B151 / B467 and ASME SB equivalents.

Request a C70600 Quote

Send Inquiry

whatsapp

Phone

E-mail

Inquiry