GNEE can provide the form
Application Of ASTM B43 C23000 Brass Pipe
Pump Cylinder Liners
Heat Exchanger Shells
Pump Lines
Plumbing
Condenser Tubes
Boiler Feed Tubes
Fittings
Tubes for Heat Exchangers
C23000 Tubing Thermal Properties
| Treatment | Maximum* | Minimum* |
|---|---|---|
| Hot treatment | 1650 | 1450 |
| Annealing | 1350 | 800 |
C230 Brass Alloy Polish Tubing Physical Properties
| Metric | US Customary | |
|---|---|---|
| Melting point – solidus | 966 °C | 1770 °F |
| Melting point – liquidus | 999 °C | 1830 °F |
| Density | 8.67 gm/cm3 at 20 °C | 0.313 lb/in3 at 68 °F |
| Electrical conductivity | 0.186 MegaSiemens/cm at 20 °C | 32% IACS at 68 °F |
| Modulus of rigidity | 41369 MPa | 6000 ksi |
| Specific gravity | 8.67 | 8.67 |
| Thermal conductivity | 140.3 W/m at 20 °C | 81 Btu/sq ft/ft hr/°F at 68 °F |
| Specific heat capacity | 377.1 J/kg at 20 °C | 0.09 Btu/lb/°F at 68 °F |
| Coefficient of thermal expansion 68-572 | 18.4 · 10-6 per °C (20-300 °C) | 10.6 · 10-6 per °F (68-572 °F) |
| Modulus of elasticity in tension | 110317 MPa | 16000 ksi |
Fabrication Properties Of Brass C23000 Tubes
| JOINING TECHNIQUE | SUITABILITY |
|---|---|
| Butt Weld | Good |
| Brazing | Excellent |
| Capacity for Being Hot Formed | Good |
| Capacity for Being Cold Worked | Excellent |
| Gas Sheilded Arc Welding | Good |
| Soldering | Excellent |
| Coated Metal Arc Welding | Not Recommended |
| Oxyacetylene Welding | Good |
| Machinability rating | 30 |
| Seam Weld | Not Recommended |
| Spot Weld | Fair |
Products provided by GNEE
| Product Category | Standards | Available Grades | Size Range | Key Applications |
|---|---|---|---|---|
| Copper Tube/Pipe | ASTM B75, B88, B280, EN 1057 | All Grades Available: C11000, C10200, C12000, C12200, C10100, C26000, C26800, C28000, C36000, C38500, C51000, C51900, C52100, C54400, C70600, C71500, C75200, C77000, C17200, C17500, C17510 |
OD: 6mm - 159mm Wall Thickness: 0.5mm - 5mm Length: Straight 1-6m, Coils up to 50m |
Plumbing, HVACR, Heat Exchangers, Industrial Piping |
| Copper Sheet/Plate | ASTM B152, B152M, EN 1652 | All Grades Available: C11000, C10200, C12000, C12200, C10100, C26000, C26800, C28000, C36000, C38500, C51000, C51900, C52100, C54400, C70600, C71500, C75200, C77000, C17200, C17500, C17510 |
Thickness: 0.3mm - 50mm Width: 300mm - 1200mm Length: 1000mm - 3000mm |
Architecture, Electrical Components, Fabrication, Decorative |
| Copper Rod/Bar | ASTM B187, B16, B124, EN 12163 | All Grades Available: C11000, C10200, C12000, C12200, C10100, C26000, C26800, C28000, C36000, C38500, C51000, C51900, C52100, C54400, C70600, C71500, C75200, C77000, C17200, C17500, C17510 |
Diameter: 3mm - 300mm Length: 1000mm - 4000mm |
Machined Parts, Fasteners, Busbars, Structural Components |
| Copper Wire | ASTM B1, B3, B174, EN 13601 | All Grades Available: C11000, C10200, C12000, C12200, C10100, C26000, C26800, C28000, C36000, C38500, C51000, C51900, C52100, C54400, C70600, C71500, C75200, C77000, C17200, C17500, C17510 |
Diameter: 0.05mm - 12mm Form: Bare, Tinned, Stranded |
Electrical Windings, Cables, Conductors, Fasteners |
| Copper Strip | ASTM B152, B122, B103, EN 1652 | All Grades Available: C11000, C10200, C12000, C12200, C10100, C26000, C26800, C28000, C36000, C38500, C51000, C51900, C52100, C54400, C70600, C71500, C75200, C77000, C17200, C17500, C17510 |
Thickness: 0.05mm - 3.0mm Width: 10mm - 500mm |
Electronics, Connectors, Springs, Decorative Trim |
