GNEE can provide the form
C70600 CU-NI 90/10 Copper Tube
ASTM B466 C70600 Copper Nickel Pipes
Copper Nickel 90/10 Tube price
US $4.00-$4.50 / Meter
Above is an approx price, please contact for final price of Copper Nickel 90/10 Tube
Copper Nickel 90/10 Tube properties
90/10 Copper Nickel Tube Chemical Composition
| Cu-Ni 90/10 | Cu | Pb | Mn | Fe | Zn | Ni |
| 88.6 min | 0.05 max | 1.0 max | 1.8 max | 1 max | 9-11 max |
Cupro Nickel 90/10 Seamless Tube Mechanical Properties
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
|---|---|---|---|---|
| 8.1 g/cm3 | 1443 °C (2430 °F) | Psi – 35,000, MPa – 241 | Psi -80,000, MPa -551 | 30 % |
Equivalent Grades for Cu-Ni 90/10 Seamless & Welded Tubing
| STANDARD | UNS | WERKSTOFF NR. |
|---|---|---|
| Cupro Nickel 90/10 | C70600 | 2.0872 |
Cupro Nickel 90/10 Tubing Physical Properties:
| Composition (Percent) | Copper (inc. Silver) 88.6, Lead .05 max., Iron 1.8 max., Zinc 1.0 max., Nickel 11.0 max., Manganese 1.0 max. |
| Nearest Applicable ASTM Specifications | B111, B359, B395, B466, B467, B543, B552 |
| Melting Point (Liquidus) | 2100 F |
| Cold Working Capacity | Good |
| Hot Forming Capacity | Good |
| Hot Forgeability Rating | n/a (Forging Brass = 100) |
| Hot Working Temperature | 1550 - 1750 F or 850 - 950 C |
| Annealing Temperature | 1100 - 1500 F or 600 - 825 C |
| Machinability Rating | 20 (Free Cutting Brass = 100) |
Mechanical Properties for 1.00 OD x .065 Wall Tubing:
| Temper | Tensile Strength | Yield Strength * | Elongation in 2 in. | Rockwell Hardness (F) | Rockwell Hardness (B) | Rockwell Hardness (30T) | Shear Strength |
|---|---|---|---|---|---|---|---|
| .025 mm | 44.0 ksi | 16.0 ksi | 42 % | 65 | 15 | 26 | - |
| Light Drawn | 60.0 ksi | 57.0 | 10 % | 100 | 72 | 70 |
Drawn – General Purpose (H58)Temper is suitable to use for general purpose tube only, usually where there is no real requirement for high strength or hardness on the one hand or for bending qualities on the other.
Hard Drawn (H80)Temper is commonly used only when there is need for hard or strong tube as is commercially feasible for the size in question.
Light Drawn – Bending (H55)Temper is suitable only when a stiffness tube is required, but yet capable of readily being bent (or otherwise moderately cold worked) is needed.
Typical Uses: Condensers, distiller tubes, condenser plates, evaporator and heat exchanger tubes, ferrules, salt water piping.
Equivalencies Copper Nickel (90/10) Tube and Tubing:
|
KS D5301 JIS H3300 |
C7060T |
| ASTM B111 | C70600 |
| ASTM B466 | C70600 |
| BS2871 {PART2} | CN102 |
| AS1752 | C70600 |
| DIN17664 | CuNi10Fe 1Mn |
| DIN 86019 WL2.1972 | CuNi10Fe 1.6Mn |
| EEMUA 144 | 7060X |
| MIL-T-16420K | 706 |
| EN12449 | CW352H |
Products provided by GNEE
| Product Form | Main Alloy / UNS Number (Select Common Grades) | Common ASTM Standards | Thickness / Diameter | Width / OD | Length | Surface Finish |
|---|---|---|---|---|---|---|
| Copper Tube/Pipe | C10100, C10200, C10300, C10800, C11000, C12000, C12200, C14200, C19200, C23000, C44300, C68700, C70600, C71500 | B75, B88, B111, B280, B395, B543 | 0.012" - 0.125" (0.3mm - 3.2mm) Wall | 1/8" - 6" (3.2mm - 152mm) OD | Straight: 10ft - 20ft (3m - 6m) Coils: Custom |
Drawn (Bright), Annealed (Soft), Bare, Tin-Plated |
| Copper Sheet/Plate | C10100, C10200, C11000, C11300, C11400, C11600, C12200, C14200, C19200, C22000, C26000, C26800, C27000, C51000, C52100, C54400, C63000, C77000 | B152, B370, B36 | Sheet: 0.006" - 0.188" (0.15mm - 4.8mm) Plate: > 0.188" (4.8mm) |
12" - 48" (305mm - 1220mm) or more | 36" - 144" (914mm - 3658mm) or more | Mill Finish, Polished (Mirror), Brushed, Oxidized, Pre-painted |
| Copper Bar/Rod | C10100, C11000, C11300, C11400, C11600, C14500, C14700, C15000, C15700, C18200, C18400, C18700, C36000, C46400, C48500, C63000, C64200, C65500, C67300, C67400 | B124, B16, B98, B138, B139, B196, B301 | Round: 1/8" - 6" (3mm - 150mm) Dia. Flat Bar: 1/4" - 12" (6mm - 305mm) Wide |
N/A for Rounds | 12ft - 20ft (3.6m - 6m) Standard | Drawn (Bright), Turned & Polished, Hot Rolled, Sand Blasted |
| Copper Wire | C10100, C10200, C11000, C11300, C11400, C11600, C15500, C16200, C21000, C22000, C23000, C26000, C27000, C51000, C52100, C54400, C63000, C77000 | B1, B2, B3, B105, B134, B159, B197 | 0.010" - 0.500" (0.25mm - 12.7mm) Dia. | N/A | Coils: 1lb to several thousand lbs | Bare (Bright), Annealed (Soft), Tin-Plated, Nickel-Plated, Enameled |
| Copper Foil | C10100, C10200, C11000, C11300, C11400, C11600 | B370, B152 (Often follows IPC-4101) | 0.0005" - 0.010" (12µm - 250µm) | 18" - 48" (457mm - 1220mm) | Rolls: 500ft - 5000ft (150m - 1500m) | Electrodeposited (ED), Rolled & Annealed (RA), Double-Treat |
