Purple copper row generally refers to copper busbar. Copper busbar is an indispensable conductive material for manufacturing motor windings, high and low voltage electrical appliances, switch contacts, and conductors for power supply and distribution installations.
Variety introduction
Copper busbar is one of the main varieties of copper processing materials. Copper bus has high mechanical properties, good electrical conductivity, thermal conductivity, excellent corrosion resistance, electroplating, brazing, beautiful and beautiful metal luster and good molding performance, so it is made of a variety of power transmission and transformation, electrical equipment in the field of electric power has been widely used. In recent years, with the sustained and rapid development of the national economy, China's copper busbar production and consumption has also increased significantly, while the quality of copper busbar requirements are also constantly improving.
Continuous extrusion process
From the continuous extrusion deformation principle and process can be seen, continuous extrusion compared with the traditional process, has the following advantages:
1. The forming process is hot extrusion plastic molding, can eliminate the raw material surface defects and mechanical damage to product quality, the product surface will not produce the traditional process is very prone to warping, burrs and other defects, so that the copper busbar has a good surface quality.



2 copper busbar continuous extrusion, copper billet in front of the extrusion die mouth at high temperature, high pressure three-way compressive stress conditions, copper rod of the original internal casting defects such as porosity, shrinkage, etc. can be eliminated in the process of continuous extrusion, not like drawing process, due to the role of its axial tensile stress, it will make the transverse defects of hair cattle expansion. The copper busbar produced can obtain excellent performance.
3 due to the continuous extrusion of the special thermal deformation process, so that the production of copper busbar has a very fine grain size, dense internal organization.
4. The annealing process is eliminated, which not only saves electricity but also completely avoids changes in product properties caused by uneven furnace temperature during the annealing process and ensures that the product properties are uniform along the entire length, which can easily satisfy the impedance matching requirements of transformers and motors.
5. Optimized mold materials and structure can ensure that the products have high dimensional accuracy, not only to meet the requirements of national standards and IEC standards, but also to ensure that the same batch of products have the same size and performance.
6. Due to the elimination of the annealing process, the production cycle is significantly shortened.
7. The production process will not produce any environmental pollution.
8. The whole production line adopts advanced computer control system, which realizes the automation of the equipment in the production process, improves the stability and reliability of the production line, and greatly reduces the labor intensity of the operators.
Quality improvement measures
I. Ensure that the charge is dry, strengthen the melt cover, improve the casting process
Ensure that the charge is dry to prevent the moisture in the charge and copper reaction to form oxide inclusions and inhalation of hydrogen; strengthen the melt cover to prevent the melt from absorbing gas and oxidation, thus preventing the copper busbar in the heat treatment process to produce "hydrogen disease" or "oxygen disease", resulting in copper busbar Surface peeling, bubbles, inclusions, and other surface defects; casting process is reasonable not only to maximize production efficiency, but also to reduce the loose, cracks, coarse grains and tissue segregation and other defects, thereby reducing the copper bus surface cracks, voids, surface roughness, etc., to improve the surface quality of copper bus.
Second, strengthen the production process control and production management
In order to reduce the copper busbar surface defects, strengthen the process control and production management is very important.
Third, copper bus bar blank pickling
Copper ingot by heating and extrusion into a copper bus bar blank, because of the heating so that the surface of the copper bus bar blank there are many copper oxides, to be removed through the pickling process.
Fourth, hot extrusion die, stretching die optimization and rational use of choice
Copper hot extrusion mold is working in harsh high-temperature conditions, the general use of both ceramic properties (hardness, abrasion resistance, high temperature, oxidation, corrosion resistance) and metal properties (high toughness, plasticity) of the metal ceramic mold.
Tensile dies should be made of cemented carbide materials containing tungsten carbide and cobalt elements. Optimized design of lubrication cone, working belt, sizing belt and exit cone of the stretching die, bright polishing of the inner hole of the stretching die, and reasonable arrangement of the stretching process make the surface of the stretched copper busbar in a good smooth and flat state.
Fourth, mold stretching with process lubricants
Process lubricants can be divided into three categories according to the polymerization state: one is the whole oil and mixed oil; two is water-based emulsion; three is a solid lubricant. Domestic copper processing industry, copper busbar production enterprises, the use of more successful is the use of water-based emulsion for process lubricants. It has both oil lubrication and stability, but also has the water cooling and cleaning, and low price, easy to use. In actual production, it is best to buy professional manufacturers to configure the production of lubricants; as the lubricant contains a large amount of water, long time easy to deteriorate, pay attention to the use of the process of maintenance and monitoring, according to the provisions of the regular replacement.
Five, stretching, straightening, shear process of surface protection
After pickling copper extrusion billet with mold stretching, in order to protect the bright surface after stretching not in the straightening, shear production process or lifting and handling process of scratching, bruising, moxa, will stretch the copper busbar flat in a clean sack, each layer are in the head, in the tail of the three parts of the separation.




