C95800 Composition
Alloy C95800 comprises 78-82% copper, 10-12% aluminium, 3-5% nickel, 2.5% iron, and 1.5% zinc. This combination offers good resistance to erosion and corrosion, high strength, high flexibility, and good thermal and electrical conductivity.
| Element | Content (%) |
|---|---|
| Cu, Copper | 79.0 |
| Al, Aluminium/Aluminum | 8.50-9.50 |
| Ni, Nickel | 3.50-4.50 |
| Mn, Manganese | 0.80-1.50 |
| Fe, Iron | 0.030 |
C95800 Physical Properties
Aluminium bronze is a dense and tough alloy. Its physical properties include:
A density of 7.8 g/cm3.
A melting point of 1005-1025°C.
At room temperature, a thermal conductivity of 37 W/(m·K).
It is also non-magnetic, making it ideal for magnetic-sensitive applications such as MRI machines.
C95800 Mechanical Properties
Aluminium bronze has superior mechanical properties, including high yield and strength. It has a tensile strength of 820 MPa, yield strength of 420 MPa, and a 25% extension threshold. It is also ductile so that it can be easily shaped and moulded without fracturing.
| Properties | Metric | Imperial |
|---|---|---|
| Hardness, Brinell (3000 kg load; sand cast) | 159 | 159 |
| Hardness, Rockwell B (cast and annealed) | 84.0-89.0 | 84.0-89.0 |
| Hardness, Rockwell B (permanent mold cast) | 88 | 88 |
| Tensile strength (cast and annealed) | 585 MPa | 84800 psi |
| Tensile strength (sand cast) | 655 MPa | 95000 psi |
| Tensile strength (permanent mold cast) | 660 MPa | 95700 psi |
| Yield strength (cast and annealed) | 240 MPa | 34800 psi |
| Yield strength (sand cast) | 262 MPa | 38000 psi |
| Yield strength (at strain 0.500%/permanent mold cast) | 360 MPa | 52200 psi |
| Elongation at break (in 50 mm (2 in.); cast and annealed) | 15.00% | 15.00% |
| Elongation at break (permanent mold cast) | 17.00% | 17.00% |
| Elongation at break (sand cast) | 25.00% | 25.00% |
| Reduction of area (cast and annealed) | 16.00% | 16.00% |
| Compressive strength (at 0.1% permanent set; cast and annealed) | 240 MPa | 34800 psi |
| Compressive strength (at 1% permanent set; cast and annealed) | 330 MPa | 47900 psi |
| Compressive Strength (at 10% permanent set; cast and annealed) | 690 MPa | 100000 psi |
| Charpy impact (at -23-66°C/-9.40-151°F/ Keyhole) | 13.0 J | 9.59 ft-lb |
| Charpy impact (at -23-66°C/-9.40-151°F/ V-notch) | 22.0 J | 16.2 ft-lb |
| Fatigue strength (at number of cycles 1.00e+8/ rotating beam) | 230 MPa | 33400 psi |
| Machinability (UNS C36000 (free-cutting brass) = 100) | 50% | 50% |
| Shear modulus | 42.0 GPa | 6090 ksi |
| Poisson's ratio | 0.34 | 0.34 |
| Elastic modulus | 117 GPa | 16969 ksi |
C95800 Thermal Properties
| Properties | Metric | Imperial |
|---|---|---|
| Thermal expansion co-efficient (at 20-300°C/68-572°F) | 16.2 µm/m°C | 9.00 µin/in°F |
| Thermal conductivity (at 20°C/68°F) | 36.0 W/mK | 250 BTU in/hr.ft².°F |
C95800 Equivalents
ASTM B148
ASTM B271
ASTM B30
ASTM B505
ASTM B763
ASTM B806
MIL B-24480
QQ C390
SAE J461
SAE J462
C95800 Uses
Aluminium bronze is a versatile alloy with various applications. It is widely used in the construction of marine hardware, such as propellers, shipbuilding, and offshore drilling equipment. The alloy is also used in high-stress applications, including hydraulic systems and aircraft parts.
C95800 Hardness
Aluminium bronze has excellent wear resistance and hardness due to its aluminium content. Its hardness ranges from 200 to 230 Brinell hardness number (BHN), making it ideal for high-load and high-abrasion applications.
C95800 Heat Treatment
Aluminium bronze is a heat-treatable alloy which can be hardened by quenching or tempering. The quenching process involves heating the alloy to 800-850°C and cooling it in oil. The tempering process consists of reheating the alloy to 450-600°C and slowly cooling it in air. The heat treatment process improves the alloy's hardness and tensile strength.
C95800 Welding
Aluminium bronze can be welded using various welding techniques, including gas tungsten arc welding (GTAW), gas metal arc welding (GMAW), and manual metal arc welding (MMAW). However, the alloy must be preheated before welding to prevent cracks and ensure a strong weld.
FAQ
1. What is C95800?
C95800 is a nickel-aluminum bronze alloy. Its nominal composition is:
Cu – ~81–85% (balance)
Al – ~8.5–9.5%
Ni – ~4.0–5.0%
Fe – ~3.5–4.5%
Mn – ≤1.5%
Other trace elements (Si, Sn, Zn, Pb limited).
It is a cast alloy (sand, centrifugal, or investment cast) and is one of the strongest copper-base alloys available.
2. What are the key properties of C95800?
| Property | Typical Value |
|---|---|
| Tensile strength | 650–750 MPa (cast) |
| Yield strength (0.2%) | 250–350 MPa |
| Elongation | 15–25% (good ductility for a cast bronze) |
| Hardness | 150–190 HB (Brinell) |
| Density | ~7.64 g/cm³ |
| Electrical conductivity | ~7–8% IACS (low, not for electrical use) |
| Thermal conductivity | ~36 W/m·K |
| Corrosion resistance | Excellent in seawater, brackish water, acidic & alkaline media |
3. What makes C95800 different from standard aluminum bronze (e.g., C95400)?
| Feature | C95800 | C95400 (Al-Bronze, no Ni) |
|---|---|---|
| Nickel content | 4–5% (adds strength & corrosion resistance) | None |
| Strength | Higher (especially at elevated temps) | Moderate |
| Seawater corrosion | Superior – resists crevice & impingement attack | Good, but less resistant to velocity effects |
| Stress-corrosion cracking | Much better resistance | More susceptible |
| Cost | More expensive (Ni adds cost) | Lower cost |
4. Where is C95800 typically used?
Common applications include:
Marine propellers and pump impellers
Valve bodies, stems, and seats (especially for seawater, oil, gas)
Ship shaft sleeves and bearing cages
Underwater connectors and hydraulic components
Wear rings, guide bushings, and gears in heavy machinery
Pump casings for desalination, chemical, and offshore platforms
5. What are its corrosion resistance characteristics?
Excellent in seawater, even at high flow velocities (resists cavitation and impingement).
Resistant to sulfides, chlorides, and organic acids.
Good against alkaline solutions (e.g., NaOH).
Not recommended for strong oxidizing acids (e.g., concentrated nitric acid) or ammonia-rich environments.
Forms a protective aluminum oxide film that self-heals.
6. Can C95800 be heat treated?
Yes, but not in the conventional sense (like steel).
It can be stress-relieved at 300–400°C to reduce residual casting stresses.
Solution annealing + aging is possible but rarely used – most properties come from the as-cast or cast-and-annealed condition.
Overheating above ~650°C may cause grain growth and embrittlement (aluminum-rich β-phase transformation).
7. How machinable is C95800?
Machinability rating ~50–60% of free-cutting brass (C36000).
It is gummy and work-hardens moderately – use carbide tools, positive rake angles, and ample coolant.
Recommended speeds: 60–100 m/min for turning, moderate feeds.
It is not recommended for high-speed automatic screw machines without special tooling.




