C11000 Copper Alloy, also known as Electrolytic Copper, is a high purity copper material whose main ingredient is copper (Cu) with a content of over 99.95%. This copper alloy is widely used in many fields such as electronics, electrical, communications, aerospace, etc. for its excellent electrical and thermal conductivity.
Chemical Composition
The chemical composition of C11000 copper alloy is very close to that of pure copper, and in addition to copper, it contains very small amounts of impurity elements such as oxygen (O), sulfur (S), phosphorus (P), silicon (Si), etc. The chemical composition of C11000 copper alloy is very close to that of pure copper, and in addition to copper, it contains very small amounts of impurity elements such as oxygen (O), sulfur (S), phosphorus (P), and silicon (Si). The content of these impurity elements is strictly controlled to ensure the high electrical and thermal conductivity of the material.



Forms of supply
C11000 copper alloy can be supplied in a variety of forms to meet the needs of different applications:
Wire: for the manufacture of wires, cables, etc.
Sheet: for the manufacture of heat sinks, heat exchangers, etc.
Tubes: for the manufacture of pipes for heat exchangers, etc.
Rods: for machining and manufacturing of various parts
.
Heat treatment process
C11000 copper alloy can be realized by annealing treatment if it needs to improve its ductility during processing. Annealing restores the toughness and plasticity of the material that has been reduced during cold processing
The annealing process is used to restore the toughness and plasticity of the material, which are reduced during cold working.
Areas of application
Due to its high electrical and thermal conductivity, the C11000 copper alloy is widely used:
Wire, cable and busbar manufacturing.
Electronic products and components such as transformer windings and motor rotors.
Heat exchangers, valves, pipes and other parts that require good thermal conductivity.
Electronic components, electrical equipment, chemical equipment and other fields.
Mechanical Properties
The mechanical properties of C11000 copper alloy are relatively weak, with the tensile strength generally between 150-220 MPa and the yield strength lower, between 70-110 MPa. Due to its high purity, the elongation and shrinkage of this alloy are high.
Physical Properties
C11000 copper alloy has excellent physical properties, including:
Density: 8.96 g/cm³.
Melting point: 1083.4°C.
Thermal conductivity: 401 W/(m-K) @ 20°C.
Electrical conductivity: 58 MS/m @ 20°C.
Material Advantages
The advantages of C11000 copper alloy are its:
High electrical and thermal conductivity.
Good corrosion resistance.
Easy machining and molding.
Good solderability Good solderability.
Specification of C11000 copper available from GNEE
Email : sales@gneesteel.com
| End Product | Specification |
| Bands, Projectile Rotating | MILITARY MIL-B-20292 |
| Bar | ASME SB133, ASTM B152, SAE J461, J463 |
| Bar, Bus | ASTM B187 |
| Bar, Forging | ASTM B124 |
| Bolts | ASTM F468 |
| Brazing Filler Metal | FEDERAL QQ-B-650 |
| Foil, Printed Circuits | ASTM B451 |
| For, Forging | ASTM B124 |
| Forgings, Die | ASTM B283 |
| Nuts | ASTM F467 |
| Pipe, Bus | ASTM B188 |
| Plate | AMS 4500, ASTM B152, SAE J461, J463 |
| Rod | ASME SB133, MILITARY MIL-C-12166, SAE J461, J463 |
| Rod, Bus | ASTM B187 |
| Screws | ASTM F468 |
| Shapes | SAE J461, J463 |
| Shapes, Bus | ASTM B187 |
| Shapes, Forging | ASTM B124 |
| Sheet | AMS 4500, ASTM B152, B694, SAE J463, J461 |
| Sheet, Building Construction | ASTM B370 |
| Sheet, Clad | ASTM B506 |
| Sheet, Lead Coated | ASTM B101 |
| Sheet, Printed Circuits | ASTM B451 |
| Strip | AMS 4500, ASTM B694, B152, SAE J463, J461 |
| Strip, Building Construction | ASTM B370 |
| Strip, Clad | ASTM B506 |
| Strip, Printed Circuits | ASTM B451 |
| Studs | ASTM F468 |
| Tube, Bus | ASTM B188 |
| Tube, Welded | ASTM B447 |
| Wire, Coated With Lead Alloy | ASTM B189 |
| Wire, Coated With Nickel | ASTM B355 |
| Wire, Coated With Silver | ASTM B298 |
| Wire, Coated With Tin | ASTM B246, B33 |
| Wire, Flat | AMS 4500, ASTM B272 |
| Wire, Hard Drawn | ASTM B1, FEDERAL QQ-W-343 |
| Wire, Medium-Hard Drawn | ASTM B2, FEDERAL QQ-W-343 |
| Wire, Metallizing | MILITARY MIL-W-6712 |
| Wire, Soft | ASTM B3, B738, B48, FEDERAL QQ-W-343, SAE J461, J463 |
| Wire, Stranded | ASTM B8, B496, B470, B286, B229, B226, B174, B173, B172, FEDERAL QQ-B-575 |
| Wire, Trolley | ASTM B47, B116 |




