GNEE can provide the form
Products Description
C68700 Aluminum Brass "Arsenical" UNS CDA101, ASTM B111, ASTM B395, ASTM B187, ASTM B152.
C68700 has especially good corrosion resistance properties in sea water. C44300 Tube and C68700 Tube have good corrosion resistance. C68700 annealed in O61 Temper. Tensile strength minimum in 345Mpa, Yield Strength minimum in 125Mpa.
C68700 Tube density in 8.33g/cm3, 0.301lb/in.3
Typical Application of C68700 Aluminum Brass "Arsenical"
Industrial: Condenser Tube, Evaporator Tubes, Ferrules, Distiller Tubes, Heat Exchanger Tubes
C68700 aluminium brass tubes are widely used in "Seawater desalting plants"
ASTM B111 C68700 Tube Chemical Composition
Element Weight %
Copper 76.0-79.0
Zinc Reminder
Aluminium 1.8-2.5
Arsenic 0.02-0.06
Lead 0.07
Iron 0.06 max
C68700 Brass Tubes Standard Specification:
| COUNTRY | STANDARD | NAME |
| ASTM | ASTM B111 | Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock |
| GB/T | GB/T8890 | Seamless Copper Alloy Heat Exchanger Tubes |
| BS | BS 2871CZ110 | Copper and Copper Alloys Tubes |
| JIS | JIS H3300 | Copper and Copper Alloy-Seamless Pipes and Tubes |
| DIN | DIN1785 | Wrought Copper and Copper Alloy Tubes for Condensers and Heat Exchangers |
Products provided by GNEE
| Product Category | Standard & Material | Available Forms | Thickness / Diameter Range | Width / OD Range | Length / Form | Temper / State | Surface Finish |
|---|---|---|---|---|---|---|---|
| Copper Sheet & Plate | ASTM B152, B187 Pure Copper (C11000) Phosphor Bronze, Brass |
• Coil • Sheet • Plate |
Sheet: 0.3 mm - 10.0 mm Plate: 10.0 mm - 100 mm |
100 mm - 2500 mm | Coil: Custom Sheet/Plate: 1000mm - 6000mm or Custom |
• O (Soft Annealed) • H02 (Half-Hard) • H04 (Hard) • H08 (Full-Hard) |
• Mill (Bare) • Clad • Brushed • Coated |
| Copper Rod & Bar | ASTM B133, B187 Pure Copper, Tellurium Copper Brass, Bronze |
• Round Rod • Square Bar • Hexagonal Bar • Flat Bar |
Rod Dia.: 2.0 mm - 300 mm Flat Bar Thk.: 3 mm - 50 mm |
Flat Bar Width: 10 mm - 400 mm | Straight: 1000mm - 6000mm Coil (for small dia.) |
• Annealed (Soft) • Half-Hard • Hard • As Drawn |
• Drawn (Smooth) • Turned (Peeled) • Ground (Polished) |
| Copper Wire | ASTM B1, B3 Bare Copper, Tinned Copper |
• Bare Wire • Tinned Wire • Stranded Wire • Braided Wire |
Solid Wire: 0.05 mm - 10.0 mm Stranded: Custom (e.g., 7/0.2mm) |
- | Coil, Spool, Reel Weight: Custom (e.g., 5kg, 25kg) |
• Soft (Annealed) • Hard Drawn • Medium-Hard |
• Bright Bare • Electrotinned • Oxidized-Resistant |
| Copper Tube & Pipe | ASTM B75, B88 Seamless, Welded DHP Copper (C12200) |
• Straight Tube • Coiled Tube • Capillary Tube • Square Tube |
OD: 3 mm - 300 mm Wall Thk.: 0.5 mm - 10.0 mm |
- | Straight: 1000mm - 8000mm Coil: Custom Length |
• Annealed (Soft, Bendable) • Hard Drawn (Straight) |
• Bare (Clean) • Polished • Plastic Capped |
| Copper Foil | ASTM B370 Rolled Annealed (RA) Electrodeposited (ED) |
• Roll / Coil • Strip |
Thickness: 0.01 mm - 0.50 mm (10 µm - 500 µm) |
10 mm - 1300 mm | Coil: Custom Length | • As Rolled (Hard) • Annealed (Soft, Ductile) • Laminated |
• Standard (One Side Bright) • Double Side Bright • Treated (for PCB) |
