GNEE can provide the form
Custom Cut to Size Standard Copper-Zinc Alloy Yellow Brass Tubes Supplier
| Grade | USA | U.K | Germany | Japan |
| China BG | ASTM | BS | DIN | JIS H |
| H62 | C28000 | CZ109 | / | C2800 |
Products Description
Tubes temper: H, 1/2 H, 1/4H or soft, all tempers are available.
Dimensions: OD: 5-350mm, WT: 0.5-50mm, or according to the buyers requirements, and also length and tolerance subject to the buyer's decisions
Tubes in good straightness, with clean surface of both inside and outside
With pre-shipment inspection if needed, chemical report, mill test if asked, marked tensile strength, yield strength, elongation rate etc.
Packaging Detail:standard export package
Delivery: Around 35days after sight of Irrevocable L/C or Deposit
H62 C28000 Brass Tubing Application:
Used in a variety of plumbing, heating, and cooling applications
Used in high-pressure applications
Used in water distribution lines, valve and pump components, air conditioning systems, compressor lines, refrigerant systems, and much more.
Custom Service:
Complete Specifications on Demand
Cut to Size According to Your Requirements
Flexible/Straight Copper Tube as Your Need
Products provided by GNEE
| Product Category | Standards | Available Grades | Size Range | Key Applications |
|---|---|---|---|---|
| Copper Tube/Pipe | ASTM B75, B88, B280, EN 1057 | All Grades Available: C11000, C10200, C12000, C12200, C10100, C26000, C26800, C28000, C36000, C38500, C51000, C51900, C52100, C54400, C70600, C71500, C75200, C77000, C17200, C17500, C17510 |
OD: 6mm - 159mm Wall Thickness: 0.5mm - 5mm Length: Straight 1-6m, Coils up to 50m |
Plumbing, HVACR, Heat Exchangers, Industrial Piping |
| Copper Sheet/Plate | ASTM B152, B152M, EN 1652 | All Grades Available: C11000, C10200, C12000, C12200, C10100, C26000, C26800, C28000, C36000, C38500, C51000, C51900, C52100, C54400, C70600, C71500, C75200, C77000, C17200, C17500, C17510 |
Thickness: 0.3mm - 50mm Width: 300mm - 1200mm Length: 1000mm - 3000mm |
Architecture, Electrical Components, Fabrication, Decorative |
| Copper Rod/Bar | ASTM B187, B16, B124, EN 12163 | All Grades Available: C11000, C10200, C12000, C12200, C10100, C26000, C26800, C28000, C36000, C38500, C51000, C51900, C52100, C54400, C70600, C71500, C75200, C77000, C17200, C17500, C17510 |
Diameter: 3mm - 300mm Length: 1000mm - 4000mm |
Machined Parts, Fasteners, Busbars, Structural Components |
| Copper Wire | ASTM B1, B3, B174, EN 13601 | All Grades Available: C11000, C10200, C12000, C12200, C10100, C26000, C26800, C28000, C36000, C38500, C51000, C51900, C52100, C54400, C70600, C71500, C75200, C77000, C17200, C17500, C17510 |
Diameter: 0.05mm - 12mm Form: Bare, Tinned, Stranded |
Electrical Windings, Cables, Conductors, Fasteners |
| Copper Strip | ASTM B152, B122, B103, EN 1652 | All Grades Available: C11000, C10200, C12000, C12200, C10100, C26000, C26800, C28000, C36000, C38500, C51000, C51900, C52100, C54400, C70600, C71500, C75200, C77000, C17200, C17500, C17510 |
Thickness: 0.05mm - 3.0mm Width: 10mm - 500mm |
Electronics, Connectors, Springs, Decorative Trim |
