What Oxygen-Free Copper Is and Why It Matters
Oxygen-free copper, also called oxygen-free high thermal conductivity copper, is a wrought high-conductivity copper that has been electro-refined so that the residual oxygen content is held to 0.001% or less. Oxygen is the single most damaging residual in high-conductivity copper: it exists as cuprous oxide particles at grain boundaries, it lowers electrical and thermal conductivity, and it causes embrittlement when the metal is heated in a hydrogen-bearing atmosphere. Removing it produces a metal with a purity of up to 99.99% copper, minimal foreign element content and the maximum conductivity the pure element can deliver.
C10100 OFHC Chemistry and Conductivity
| Property | Value for C10100 OFHC |
|---|---|
| Copper content, including silver | 99.99% minimum |
| Oxygen content | 0.0005% maximum |
| Deoxidation practice | No phosphorus deoxidation; the specified oxygen ceiling is reached by controlled casting and processing |
| Electrical conductivity | In excess of 101% IACS when fully annealed |
The contrast with deoxidised high phosphorus copper is important. Grades such as C12200 carry deliberate phosphorus additions in the 0.015% to 0.040% range, which protects against hydrogen embrittlement but costs several percentage points of conductivity. Oxygen-free copper keeps both properties: no residual oxide phase to embrittle the metal and no solute that depresses conductivity. That combination is why C10100 is specified for high-vacuum hardware, sputtering targets, accelerator components and high-current conductors.
ASTM B111 and ASTM B188: Selecting the Product Standard
ASTM B111 covers seamless copper and copper-alloy tube for condensers, heat exchangers and general service, and is the usual specification when tubing is used for cooling or heat transfer duty. ASTM B188 covers seamless copper bus pipe and tube, and is the reference document when the tube is used as an electrical conductor in switchyards, substations or bus runs. Round tube for pressure service is also ordered to ASTM B75, while air-conditioning and refrigeration tube follows ASTM B88 and general copper tube for plumbing follows ASTM B280. European buyers frequently add EN 1057 as the dimensional reference for round copper tube.
Available Sizes, Tempers and Forms
| Item | Range |
|---|---|
| Outside diameter | 1/4 in. to 10 in. (13.7 mm to 273 mm) |
| Wall thickness | 1.65 mm to 25 mm |
| Length | 3 m, 6 m, 12 m, or cut to 0.5 m - 20 m |
| Temper | soft annealed, half hard, hard drawn, light drawn |
| Forms | round tube, bus pipe, bus tube, coil, capillary and rectangular section |
| Common related grades | C10100, C10200, C10300, C10400, C10500, C10700, C11000, C11300, C11400, C11600, C12000 |
For scientific and vacuum applications the tube is normally supplied in the soft annealed temper so that it can be bent and brazed without cracking. Bus tube is supplied in hard drawn or half hard condition to provide adequate stiffness over long unsupported spans.
Applications in Electrical, Vacuum and Energy Service
Bus bar and bus tube in substations, switchyards and large industrial transformers, where every point of conductivity affects I2R losses.
Plasma deposition and sputtering equipment, where low relative volatility under high vacuum keeps the vacuum chamber clean.
Particle accelerator waveguide and cavity components, where thermal conductivity determines how quickly the structure can shed heat.
Solar photovoltaic and power transmission projects requiring oxygen-free conductors for long service life.
High-fidelity audio and video signal path components, where consistent conductivity is valued.
Vacuum furnace and electron beam equipment, where freedom from oxide inclusions prevents outgassing and embrittlement.
Inspection, Testing and Ordering Details
Purchasers of oxygen-free copper tube normally state the ASTM designation and year of issue, the copper UNS number, the temper, the dimensions and form, the length and quantities, and any special packaging requirement. The test schedule typically agreed for pressure tube includes the bend test, the hydrogen embrittlement susceptibility test used to detect residual cuprous oxide, microscopical examination, tension testing and eddy-current testing of the finished tube. Certification and a mill test report are issued for each lot.
Packaging is arranged by size, composition and condition so that each shipping unit can be identified by purchase order, alloy grade, temper, dimensions, length or piece count and weight.
Tube ends are capped and the surface is protected against handling damage and iron contamination.
Where the application involves hydrogen annealing or a reducing atmosphere, the purchaser should confirm that oxygen-free material has been selected rather than a tough pitch grade.
Frequently Asked Questions
Q: What does OFHC stand for?
Oxygen-free high conductivity, sometimes written oxygen-free high thermal conductivity. It describes copper such as C10100 with an oxygen ceiling of 0.0005% and conductivity above 101% IACS.
Q: How much oxygen is allowed in C10100?
The specification ceiling is 0.0005% oxygen, an order of magnitude lower than the 0.001% limit normally applied to C10200, and the material is produced without phosphorus deoxidation.
Q: Why does oxygen-free copper resist hydrogen embrittlement?
Embrittlement in tough pitch copper comes from the reaction of hydrogen with cuprous oxide particles at grain boundaries. With oxygen held below the specified ceiling there is no oxide phase to react, so the metal can be brazed or annealed in reducing atmospheres.
Q: When should C12200 be used instead of C10100?
C12200 deoxidised high phosphorus copper is a lower-cost choice for plumbing and general water tube where the very highest conductivity is not required. C10100 is selected when electrical or thermal conductivity, vacuum cleanliness or reducing-atmosphere exposure is critical.
Q: Which tests prove that the tube is genuinely oxygen-free?
Hydrogen embrittlement susceptibility testing combined with microscopical examination for cuprous oxide, supported by chemical certification of the cast, is the standard evidence. Eddy-current and tension testing complete the mechanical verification.
Q: Can oxygen-free copper tube be welded?
Yes. It is readily brazed and welded, and the low residual content actually improves consistency of the weld pool compared with oxygen-bearing copper.




