ASME SB 111 SB 111 C70600 pipe, resistant to seawater corrosion, with high antifouling properties to marine microorganisms. Widely used in shipbuilding, petrochemical, natural gas and other offshore and related industries. C70600 Copper Nickel Pipe / Copper Nickel 90/10 Seamless Pipe has good corrosion resistance, especially in sea water.
UNS C70600 copper-nickel alloy is annealed at 593 to 816°C (1100 to 1500°F). UNS C70600 copper-nickel alloy has good cold workability. Suitable for high temperature service.
UNS C70600 copper-nickel alloy is used in areas where stainless steel cannot be used due to chloride stress corrosion cracking (CSCC) and other parts where high corrosion resistance is required. These alloys are also used as machined and forged valve and pump components for seawater service. C70600 (90/10) copper-nickel alloy is highly resistant to seawater corrosion due to its high content of manganese and iron. Suitable for marine condensers, copper-nickel alloy Copper 90/10 and copper-nickel alloy Copper 70/30 are used in seawater condensation systems, heating and water supply, chemical industry, seawater desalination, etc.
Copper alloys UNS C70600 and C71500 are standard specification seamless copper-nickel alloy pipes for desalination plants.
ASTM B111 B466 C70600 Copper Nickel Tubing Chemical Composition
| Grade | C(Max) | Pb | Mn | P | S | Zn | Fe | Ni | Cu |
| C70600 | 0.05 | 0.02 | 1.0 | 0.02 | 0.02 | 0.50 | 1.0-1.8 | 9.0-11.0 | Balance |
ASME SB 111 SB 466 C70600 Pipe | EEMUA 234 UNS 7060X Physical Properties
| Properties | Metric | Imperial |
| Density | 8.94 g/cm3 | 0.323 lb/in3 |
ASME SB 111 SB 466 ASTM B111 C70600 Pipe
| Outside Diameter | Wall Thickness | |||||
| DN | OD Actual | Standard | Special | |||
| in | mm | mm | WT | kg/m | WT | kg/m |
| 4 | 8 | 1 | 0.2 | |||
| 1/8 | 6 | 10 | 1 | 0.25 | ||
| 1/4 | 8 | 12 | 1 | 0.31 | ||
| 3/8 | 12 | 16 | 1 | 0.42 | 1.5 | 0.61 |
| 1/2 | 16 | 20 | 1 | 0.53 | 1.5 | 0.78 |
| 3/4 | 20 | 25 | 1.5 | 0.99 | 2 | 1.29 |
| 1 | 25 | 30 | 1.5 | 1.19 | 2 | 1.56 |
| 1 1/4 | 32 | 38 | 1.5 | 1.53 | 2 | 2.01 |
| 1 1/2 | 40 | 44.5 | 1.5 | 1.8 | 2 | 2.38 |
| 2 | 50 | 57 | 1.5 | 2.33 | 2 | 3.07 |
| 2 1/2 | 65 | 76 | 2 | 4.14 | 2.5 | 5.14 |
| 3 | 80 | 88.9 (89) | 2 | 4.86 | 2.5 | 6.04 |
| 4 | 100 | 108 | 2.5 | 7.37 | 3 | 8.8 |
| 5 | 125 | 133 | 2.5 | 9.12 | 3 | 10.9 |
| 6 | 150 | 159 | 2.5 | 10.93 | 3 | 13.08 |
| 7 | 175 | 194 | 3 | 16.01 | ||
| 8 | 200 | 219.1 (219) | 3 | 18.12 | 3.5 | 21.09 |
| 10 | 250 | 267 | 3 | 22.13 | 4 | 29.4 |
| 12 | 300 | 323.9 (324) | 4 | 35.76 | 5 | 44.56 |
| 14 | 350 | 368 | 4 | 40.69 | 5.5 | 55.72 |
| 16 | 400 | 419 | 4 | 46.39 | 6 | 69.25 |
| 18 | 450 | 457 | 4.5 | 56.92 |
|
|




UNS C70600 copper-nickel alloy is primarily used in seawater service as forged and machined valve and pump assemblies, fittings and hardware. The alloy is also used in applications where high corrosion resistance and chloride stress corrosion cracking prevention measures prevent the use of stainless steel.
Copper-nickel alloys have excellent resistance to biofouling and marine corrosion, and have good machinability. When nickel is added, copper is stronger and more resistant to corrosion.
UNS C70600 is a copper-nickel alloy with excellent corrosion resistance even in marine environments. The alloy has average high strength and good creep resistance at elevated temperatures, at a higher cost than copper-aluminum alloys and other alloys with similar mechanical properties.
Mechanical Testing Such as Tensile of Area
Hardness Test
Chemical Analysis – Spectro Analysis
Positive Material Identification – PMI Testing
Flattening Test
Micro and MacroTest
Pitting Resistance Test
Flaring Test
Intergranular Corrosion (IGC) Test
Copper products that GNEE can provide
|
Material |
T1,T2,C10100,C10200,C10300,C10400,C10500,C10700,C10800,C10910,C10920,TP1,TP2, C10930,C11000,C11300,C11400,C11500,C11600,C12000,C12200,C12300,TU1,TU2,etc |
|
Shape |
Round, square, rectangular, etc. |
|
Length |
3m,5.8m, 6m, 11.8m, 12m, or as required. |
|
Wall Thickness |
0.2mm-120mm |
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etc |
|
Ultimate Strength (≥ MPa) |
460-680 |
|
Cu (Min) |
99% |
|
Surface |
Mill,polished,bright,oiled,hair line,brush,mirror,sand blast,or as required. |
|
Specifications |
Round:Wall thickness: 0.2mm~120mm,Outside Diameter: 2mm~910mm Square:Wall thickness: 0.2mm~120mm, Size: 2mm*2mm~1016mm*1016mm |
|
Package |
Export standard package: bundled wooden box, suit for all kinds of transport,or be required |
|
Standard
|
ASTMB152,B187,B133,B301,B196,B441,B465,JISH3250-2006,
GB/T4423-2007,etc |
|
Material
|
C10100,C10200,C10300,C10400,C10500,C10700,C10800,C10910,C10920,
C10930,C11000,C11300,C11400,C11500,C11600,C12000,C12200,C12300, C12500,C14200,C14420,C14500,C14510,C14520,C14530,C17200,C19200, C21000,C23000,C26000,C27000,C27400,C28000,C33000,C33200,C37000, C44300,C44400,C44500,C60800,C63020,C65500,C68700,C70400,C70620, C71000,C71500,C71520,C71640,C72200,etc |
|
Diameter
|
3mm~800mm
|
|
Length
|
1.0m 5.8m,6m,or as required
|
|
Container Size
|
20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High)
40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) 40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High) |
|
Price Term
|
EXW, FOB, CFR, CIF, etc.
|
|
Application
|
Copper bar is widely used in boat building,War industry, Car industry and communication
industry where the components need good wear proof and great corrosion resistance |
| Copper Plate / C1100 T2 Pure Copper Sheet 3mm 6mm Thick Customized Sizes Electric Copper Plate | |
| Production Standard | ASTM, JIS, DIN, GB, ISO |
| Material | Copper, Brass, Bronze, White Copper |
| Width | 20mm-2000mm or as the customer's request |
| Thickness | 0.1mm-200mm or as the customer's request |
| Length | 50mm-3000mm |
| Hardness | O, 1/4 Hard, 1/2Hard, 3/4 Hard, H, EH |
| OEM Service | Perforated, Cutting special size, Doing flatness, Surface treatment, etc |
| Payterm | Ex-work, FOB, CIF, CFR, etc |
| Payment | T/T, L/C, Western Union, Alibaba Trade Assurance, etc |
| Delivery Time | Within 3 days for our stock size, 7-15 days for our production |
| Package |
Export standard package: bundled wooden box, suit for all kinds of transport, or be required |
| MOQ | No MOQ for stock Size, 100 KG for our production. |
| Sample | Free and available |
| Quality |
Mill Test Certificate, ISO9001, SGS, TVE |
| Advantage |
Copper is a very ductile and malleable metal. It is high electrical conductivity and high thermal conductivity. Thus, copper parts have a significant advantage for the production of electronic and electrical components. |
|
Product Name |
Copper Wire |
|
Standard |
ASTM AISI DIN EN GB JIS |
|
Grade |
C10100,C10200,C10300,C10400,C10500,C10700,C10800,C10910,C10920,
C10930,C11000,C11300,C11400,C11500,C11600,C12000,C12200,C12300, C12500,C14200,C14420,C14500,C14510,C14520,C14530,C17200,C19200, C71000,C71500,C71520,C71640,C72200 T1,T2,T3,TU1,TU0,TU2,TP1,TP2,etc |
|
Size |
OD:as required |
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2 hard,full hard,soft,etc |
|
Tolerance |
±1% |
|
Price Terms |
FOB,CFR,CIF |
Copper CNC machined parts
|
Business type |
Factory/Manufacturer |
|
service |
Metal 3D printing, metal printing, metal powder sintering, plastic 3D printing, custom CNC machining, precision parts CNC 5-axis |
|
Apply |
Automobile assembly parts, automation equipment parts, shafts, sheet metal processing, medical equipment, machinery, aircraft, |
|
Materials |
AL 6061-T6,6063,7075-T |
|
303,304,316L,17-4(SUS630 |
|
|
4140,Q235,Q345B,20#,45# |
|
|
TA1,TA2/GR2,TA4/GR5,TC4,TC18 |
|
|
C36000(HPb62),C37700(HPb59),C26800(H68),C22000(H90) |
|
|
Copper, bronze, magnesium alloy, photosensitive resin, PA6, PA66, POM, acrylic, PC, etc |
|
|
finish |
Sand blasting, anodizing color, blackening, electroplating, electrolytic polishing |
|
Powder coating, PVD passivation, titanium plating, electro zinc plating |
|
|
Electrochromium plating, electrophoresis, QPQ (quenching-polishing-quenching |
|
|
Electrolytic polishing, chrome plating, knurling, laser etching marks, etc. |
|
|
Main equipment |
Metal printer 3/4/5 axis CNC machining center CNC machining center (milling machine), CNC lathe, grinder |
|
Cylindrical grinders, drilling machines, laser cutting machines, etc. |
|
|
Drawing format |
STEP,STP,GIS,CAD,PDF,DWG,DXF |
|
tolerance |
Customer drawing requirements |
|
Surface roughness |
Ra 0.1~3.2 |
|
Inspect |
Complete testing laboratory equipped with micrometers, optical comparators, vernier calipers, coordinate measuring machines |
|
Depth caliper vernier, universal protractor, clock, internal Celsius meter |
|
|
capacity |
Metal 3D printer working scope 420mm*420mm*450mm |
|
CNC turning work scope φ0.5mm-φ150mm*300mm |
|
|
CNC milling work scope 510mm*1020mm*500mm |
|
|
Supply capacity |
200000 pieces/month |
|
Packing type: |
PP bags, cartons, wooden boxes, PVC pallets, machine parts copy paper |
|
Quality control |
100% inspected |
|
Delivery time |
Sample day: within 7 days |

About Us
We specialize in exporting premium copper products. Our manufacturing leverages continuous casting lines and precision drawing machines. Rigorous quality control, including eddy current testing and spectrometer analysis, guarantees the superior performance of our copper tubes and coils for global applications.
If you need any help, please contact us immediately!
Email address:sales@gneemetal.com




