Oct 29, 2025 Leave a message

UNS-C44300-Admiralty-Brass-Tube.pdf

ASTM B111 C44300 Admiralty Metals Cold-drawn Seamless Tubes

GNEE can provide the form

C44300 Copper Rod

C44300 Copper Hose

C44300 Brass Sheet

Thick C44300 Copper Tape

Flexible C44300 Copper Wire

 

Standard

ASTM B111 Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock.
ASTM B111 C44300 Admiralty Metals Seamless Tubes up to 3 1 ⁄ 8 in. [80 mm] inclusive, in diameter, for use in surface condensers, evaporators, and heat exchangers.

 

ASTM B111 C44300 Admiralty Metals Seamless Tubes

Manufacture:Seamless process ,Cold-drawn
Wall thickness(WT): 0.5 mm-12.7 mm.
Outer diameter (OD): 5 mm-80 mm
Length: 6M or specified length as required.
Ends: Plain End, Beveled End, Treaded

Additional Info
Port of Shipment: Any Port, China
Payment Terms: T / T, LC
Delivery: 25 days after payment
Surface: Tubes will be varnished to prevent rust.
Marking: Standard + Steel Grade + Size + Heat No + Lot No
Package: Bundles (hexagonal),Wooden Boxes,Crates (steel/wooden) or as required

 

Annealed Copper TubeCopper Coil Tubes

Materials and Manufacture

Materials:
material of manufacture will be a form of such purity and soundness as to be suitable for processing into the products ASTM B111 Standard.
When specified in the contract or purchase order that heat identification or traceability is required, the purchaser shall specify the details desired.

Manufacture:
C44300 Admiralty Metals Seamless Tubes will be manufactured by such hot-working, cold-working, annealing, straightening, trimming,and other processes as to produce a uniform seamless tube in the finished product.
C44300 Admiralty Metals Seamless Tubes will be hot- or cold-worked to the finished size, and subsequently annealed, when required, to meet the temper properties specified.

 

Equivalent Grade of C44300

Material Designation Corresponding Material Symbol
GB/T8890 ASTM B111 BS2871 JIS H3300 DIN1785
Admiralty Brass HSn70-1 C44300 CZ111 C4430 CuZn28Sn1

 

Chemical Composition

Designation Chemical Composition %
Cu Sn Al As Ni Fe Mn Pb max. Zn
C44300 70.0-73.0 0.9-1.2 – 0.02-0.06 – 0.06 max – 0.07 Rem

 

Mechanical Properties

Copper or Copper Alloy UNS NO. Temper Designation Tensile Strength Yield Strength Elongation
in 2 in.,
Code Former min ksi(min MPa) min ksi(min MPa) min %
C44300 O61 annealed 45(310) 15(105) ---

 

Expansion Requirements

Temper Designation Copper or Copper Alloy UNS No. Expansion of Tube Outside Diameter, in Percent of Original Outside Diameter
Code Name
O61 annealed C44300 20

 

Dimensions and Permissible Variations

Dimensions and Permissible Variations

Outside Diameter,
mm
Wall Thickness, mm
0.508 0.813 0.889 1.07 1.24 and Over
0.559        
0.635        
0.711        
Diameter Tolerance, Plus and Minus, mm
Up to 12, incl 0.076 0.064 0.064 0.064 0.064
Over 12–18, incl 0.10 0.10 0.10 0.089 0.076
Over 18–25, incl 0.15 0.15 0.13 0.11 0.10
Over 25–35, incl --- --- --- 0.20 0.13
Over 35–50, incl --- --- --- --- 0.15
Over 50–79, incl --- --- --- --- 0.17


Wall Thickness Tolerances, Plus and Minus

Wall Thickness,mm Outside Diameter, mm
Over 12 to 25,incl Over 25 to 50,incl Over 50 to 80,incl
0.50, incl to 0.80 0.08 --- ---
0.80, incl to 0. 90 0.08 0.10 ---
0.90, incl to 1.5 0.11 0.11 0.13
1.5, incl to 2.1 0.13 0.13 0.14
2.1, incl to 3.0 0.17 0.17 0.17
3.0, incl to 3.4 0.18 0.19 0.20


Length Tolerances

Specified Length, mm Tolerance, all Plus, mm
Up to 4500 2.4
Over 4500–6000, incl 3.2
Over 6000–10 000, incl 4.0
Over 10 000–18 000, incl 9.5
Over 18 000–30 000, incl 13.0

 

Products provided by GNEE

Product Category UNS Numbers Typical Sizes Thickness/Diameter Available Forms Surface Treatment
Pure Copper C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10900, C11000, C11100, C11300, C11400, C11500, C11600, C12000, C12200 1000-6000mm (length) 0.1-200mm Sheet, Plate, Strip, Foil Mill finish, Polished, Bright annealed, Oiled, Brush finished
Brass Alloys C21000, C22000, C23000, C24000, C26000, C26800, C27000, C27200, C28000, C33000, C33200, C33500, C34000, C34500, C35000, C35300, C35600, C36000, C36500, C37000, C37700, C38500 500-4000mm (length) 0.05-150mm Rod, Bar, Wire, Tube Polished, Chrome plated, Lacquered, Satin finish
Bronze Alloys C51000, C52100, C52400, C53400, C54400, C63000, C63200, C64200, C65100, C65500, C65700, C67300 1000-3000mm (length) 0.2-100mm Bar, Rod, Plate, Strip Polished, Oxidized, Oiled, Ground
Copper-Nickel C70400, C70600, C71000, C71500, C72200 2000-6000mm (length) 0.5-250mm Tube, Plate, Sheet Pickled, Passivated, Polished
Phosphor Bronze C50100, C50500, C50700, C51000, C51100, C51900, C52100, C52400 500-2000mm (length) 0.05-50mm Strip, Wire, Sheet Polished, Tin plated, Natural

 

Get the latest quote

Send Inquiry

whatsapp

Phone

E-mail

Inquiry