Pure Copper C14200 Basic Information
Pure Copper C14200, also known as arsenic-containing phosphorus deoxidized copper, is a copper alloy that is widely used in electrical, electronic and mechanical engineering. It has good electrical conductivity, corrosion resistance, machinability and thermal conductivity.The chemical composition of the C14200 alloy mainly consists of copper (Cu), arsenic (As) and phosphorus (P), of which the content of copper is about 99.40%, arsenic content is between 0.15% and 0.50%, and phosphorus content is between 0.015% and 0.040%.
Pure Copper C14200 Physical and Chemical Properties
The C14200 alloy has a density of about 8.96 g/cm³ and a melting point of about 1083°C. It has a good ductility and a good temperature range. It has good ductility and plasticity and can be cold and hot worked to make parts of various shapes. In addition, the C14200 alloy has some resistance to oxidation and corrosion, making it suitable for use in a variety of environments.
Pure Copper C14200 Mechanical Properties
The mechanical properties of C14200 alloy include tensile strength, elongation and hardness. Depending on the heat treatment and processing conditions, the tensile strength usually ranges from 215 to 275 MPa, the elongation is in the range of ≥25%, and the hardness is in the range of 55 to 100 HV.This alloy is usually of an appropriate hardness to resist a certain degree of wear and deformation.
Pure Copper C14200 Application Areas
Due to the comprehensive performance advantages of the C14200 alloy, it is widely used in the manufacture of locomotive boiler hearth plates, anchor bolts, heat exchangers and condenser tubes. It is also suitable for use in areas such as chemical equipment, marine environments and food processing equipment, as well as being used as cables, connectors and electrical parts in electrical and electronic engineering.
Pure Copper C14200 Processing and Manufacturing
The C14200 alloy can be produced through a variety of processing methods, including casting, rolling, drawing and annealing. These processing steps ensure that the final properties of the material meet the requirements of the specific application. Surface treatment processes such as pickling, finish rolling and leveling may also be involved in the manufacturing process to enhance the surface quality and performance of the product.
