Brass tube non-ferrous metal tube a kind. It is pressed and drawn seamless tube. Brass tube commonly used materials (H59, H62, H65, H68). Brass tube introduction: characterized by lighter weight, good thermal conductivity, high strength at low temperatures, with the high strength of the general metal, but also easier than the general metal bending, easy to twist, not easy to crack, not easy to break, and has a certain degree of resistance to frost and expansion and impact resistance is commonly used in the manufacture of heat transfer equipment (such as condensers, etc.). Also used in oxygen equipment for the assembly of low-temperature piping. Small diameter copper pipe is commonly used in the transportation of pressurized liquids (such as lubrication systems, hydraulic systems, etc.) and used as instrumentation pressure measurement tube. It also has a strong, corrosion-resistant properties, and become the first choice for the installation of water piping, heating and cooling piping in residential housing.



Advantages of brass pipe
Brass pipe has strong, corrosion-resistant characteristics, and become the first choice of modern contractors in all residential commercial housing water piping, heating, cooling piping installation.
1. Copper is economical. Because copper pipe is easy to process and connect, so that when it is installed, can save materials and total cost, stability can be reliable, can save maintenance.
2, copper is lightweight. For the same inner diameter of the stranded threaded pipe, copper pipe does not require the thickness of ferrous metal. When installed, copper pipe transportation costs are smaller, maintenance is easier and takes up less space.
3. Copper can change shape. Because copper pipe can be bent and deformed, it can often be made into elbows and joints, and smooth bends allow copper pipe to be bent at any angle.
4,Copper is easy to connect.
5, copper is safe. It does not leak, does not promote combustion, does not produce toxic gases, and is corrosion resistant.
Product application:
1,Ordinary brass tube:(Grade H68, H65, H62)
Mainly used in heat exchangers, sanitary ware, water supply and drainage pipes, various machine parts, joints and so on.
2,Tin and arsenic brass tube: (brand number HSn70-l, H68A)
Mainly used in condenser tubes.
3, lead brass tube: (brand H59-1)
Mainly applicable to mechanical parts, bushings, etc..
Brass pipe has a strong, corrosion-resistant characteristics, and become a modern contractor in all residential commercial housing water piping, heating, refrigeration piping installation of choice. Copper pipe melts many advantages in one: it is strong, with the high strength of the general metal; at the same time than the general metal is easy to bend, easy to twist, not easy to crack, not easy to break, and has a certain degree of resistance to freezing and expansion and impact resistance, so the building of the water supply system in the copper water pipe once installed, the use of a safe and reliable, and even without maintenance and repair. Advantages of brass pipe: copper pipe is hard, not easy to corrode, and high temperature and high pressure resistance, can be used in a variety of environments.
Performance comparison
1, H59 ordinary brass tube; the cheapest price, strength, hardness and poor plasticity, but in the heat treatment can still well withstand pressure processing, corrosion resistance in general, other properties and H62 is similar. Used for general machine parts, weldments, hot punching and hot rodding parts.
2, H62 ordinary brass tube; have good mechanical properties, good plasticity in the hot state, cold plasticity can also be, good cutting, easy brazing and welding, corrosion resistance, but easy to produce corrosion rupture. In addition the price is cheap, is the application of recidivism of a common brass varieties. Used for all kinds of deep drawing and bending manufacture of saluted parts, such as pins, rivets, washers, nuts, conduits, barometer springs, screens, radiator parts.
3, H63 national standard brass tube; suitable for pressure processing in the cold state, suitable for welding and brazing. Easy to polish, is the main alloy for drawing, tying, bending and other molding. Used for screws, round rollers for pickling.
4, H65 national standard brass tube; performance between H68 and H62, the price is cheaper than H68, also has high strength and plasticity, can withstand cold and hot pressure processing, corrosion rupture tendency. Used for small hardware, daily necessities, small springs, screws, rivets and mechanical parts.
5, H68 national standard brass tube; have extremely good plasticity (is the best in brass) and high strength, good cutting performance, easy to weld, to general corrosion non-bearing stability, but easy to produce cracking. It is the most widely used variety of common brass. Used for complex cold-drawn parts and deep-drawn parts, such as radiator shells, conduits, bellows, shells, gaskets and so on.




