What is TP1/C12000 copper?
TP1 phosphorus-deoxidized copper tubing possesses many unique properties, making it an ideal choice for numerous industrial applications. Firstly, its excellent electrical and thermal conductivity facilitates its widespread use in the electrical and electronic fields. Secondly, TP1 phosphorus-deoxidized copper tubing exhibits high strength and corrosion resistance, maintaining stable performance even in harsh working environments. Furthermore, it boasts excellent machinability and weldability, facilitating processing and installation.
Mechanical Properties
Copper tubing is available in (M, M2, Y2, Y, T) tempers. Tensile strength Rm/MPa (≥200-360), elongation % (≥20-40), hardness HV (≥40-110), and hardness HB (≥35-150).
Physical Properties
Density (g/cm³): 8.94
Electricity (%IACS): 90
Electricity (MS/m): 52
Thermal Conductivity (W/(m·K)): 350
Coefficient of Thermal Expansion (10⁻⁶/K): 17.7
Elastic Modulus (GPa): 132
Specific Heat Capacity (J/(g·K)): 0.386
Poisson's Ratio: 0.34
Composition
The main component of TP1 phosphorus-deoxidized copper pipe is copper, with a small amount of phosphorus. The addition of phosphorus effectively reduces oxidation of copper during smelting and processing, improving the purity and quality of the copper pipe. Furthermore, phosphorus improves the mechanical properties of copper, increasing its strength and hardness.
Specific chemical composition and elemental parameters:
Copper + Silver Cu + Ag: 99.90
Phosphorus P: 0.004-0.012
Iron Fe: 0.01
Nickel Ni: 0.005
Beryllium Sb: 0.002
Bismuth Bi: 0.002
Sulfur S: 0.005
Oxygen O: 0.01
Arsenic As: 0.002




Fabrication and Heat Treatment
Machinability
The machinability rate of UNS C12000 copper is 20%
Welding
Brazing, gas shielded arc welding, oxyacetylene welding, soldering, and butt welding are the methods used for welding UNS C12000 copper. It is suggested that seam welding, coated metal arc welding, and spot welding are not used for welding this alloy.
Forging
Forging of UNS C12000 copper can be performed at a temperature of about 760 to 871°C (1400 to 1600°F). This alloy has good forgeability.
Hot Working
UNS C12000 copper has excellent hot working capacity.
Cold Working
UNS C12000 copper has good excellent cold working capacity.
Annealing
Annealing of UNS C12000 copper can be performed at 372 to 649°C (700 to 1200°F).
FAQ
| What tempers are available for C12000 tubing? Common tempers are annealed (soft, O60), drawn (hard, H58), and light-drawn (H55). Annealed offers maximum formability; drawn provides higher strength. |
| Can C12000 be used in oxygen service or medical gas systems? Yes, after proper cleaning and degreasing, C12000 tubes are widely used in medical gas (oxygen, nitrous oxide) and high-purity gas systems due to their cleanliness and non-permeability. |
| How does phosphorus affect conductivity in C12000? The low residual phosphorus slightly reduces electrical conductivity (~85% IACS) compared to pure C11000 (~101% IACS), but it remains excellent for most thermal and electrical applications. |
| Is C12000 susceptible to stress corrosion cracking (SCC)? Copper alloys are generally less prone to SCC than brasses, but in environments with ammonia, amines, or nitrites, SCC can occur. Proper design and avoiding sustained tensile stress in such environments are recommended. |
| What's the maximum continuous service temperature for C12000? Typically up to about 150–200°C (302–392°F) for long-term service. Short-term exposure can go higher, but annealing and softening will occur above ~250°C (482°F). |
| How should C12000 tubes be stored to prevent oxidation? Store in a dry, covered area. For long-term storage or in humid climates, sealed plastic wrapping or nitrogen purging is recommended to prevent surface tarnishing. |
| Can C12000 be bent easily? Yes, especially in the annealed temper. For hard temper tubes, bending may require a mechanical bender to avoid kinking or cracking. |
Inquire about C12000 Pricing & Samples
Our product range
| Product Category | Key Product Forms | Common Standards (Examples) | Typical Applications / Features |
|---|---|---|---|
| Copper Rods & Bars | Round Rods, Square Bars, Hexagonal Bars | ASTM B187, C11000, C10200; EN 12163-66; JIS H3250 | Electrical conductors, machined parts, connectors, hardware. Available in various tempers (soft, hard). |
| Copper Tubes & Pipes | Seamless Tubes, Straight Lengths, Coils (for flexible tubes) | ASTM B75, B280, B88; EN 12735; JIS H3300 | Plumbing, HVAC/R, heat exchangers, medical gas lines, hydraulic systems. |
| Copper Plates & Sheets | Plates (>6mm thickness), Sheets (<6mm thickness) | ASTM B152, C11000; EN 1652; JIS H3100 | Architectural cladding, industrial fabrication, grounding plates, chemical processing. |
| Copper Strips & Foils | Strips, Rolls, Precision Foils | ASTM B272, C11000; EN 1652; JIS H3100 | Electrical contacts, transformers, shielding, gaskets, decorative inlays. |
| Copper Wires | Bare Copper Wire, Stranded Wire, Busbars | ASTM B1, B3, B187; EN 13601; JIS H3260 | Windings, cables, busbars, fasteners, welding electrodes. |
Our factory
We are a specialized manufacturer of premium copper products, including rods, tubes, plates, bars, wires, and strips. Our factory strictly adheres to international standards such as ASTM, EN, JIS, and GB, ensuring material compliance for global markets. Equipped with modern production lines-including continuous casting for rods, cold drawing machines for tubes, and precision rolling mills for strips-we maintain tight control over dimensions and tolerances. Every batch undergoes rigorous in-house testing using spectrometers for chemical composition, tensile testers for mechanical properties, and eddy current testers for defect detection. Our dedicated quality lab guarantees traceable, reliable products for electrical, automotive, and engineering applications worldwide.

Get Fast Quote & Logistics Plan




