What Are C70600 and C71500
C70600 and C71500 are copper-nickel alloys strengthened by iron and manganese. C70600, known as 90/10, contains about 10 percent nickel; C71500, known as 70/30, contains about 30 percent nickel. Both are valued for exceptional resistance to corrosion, erosion, and biofouling in seawater and brackish water, which makes them standard materials for marine piping, heat exchangers, and desalination plant components.
Typical Composition
| Element | C70600 | C71500 |
|---|---|---|
| Copper | Balance | Balance |
| Nickel | 9.0-11.0 percent | 29.0-33.0 percent |
| Iron | 1.0-1.8 percent | 0.40-1.0 percent |
| Manganese | 1.0 percent max | 1.0 percent max |
| Zinc | 1.0 percent max | 1.0 percent max |
Where They Are Used
Cupro-nickel products serve industries that operate in harsh aqueous environments: marine and shipbuilding piping, heat exchangers, and hull sheathing; offshore oil and gas subsea systems and firewater lines; desalination plant evaporator tubes and brine heaters; and coastal power generation condenser tubing. The resistance to seawater corrosion and biofouling is critical in these applications.
The Difference Between C70600 and C71500
The primary difference is nickel content. C71500 provides superior strength and enhanced resistance to erosion and impingement attack at higher water velocities and in more aggressive seawater. C70600 is often preferred for its better anti-fouling characteristics, slightly higher thermal conductivity, and lower cost, making it the most common marine piping alloy.
Product Forms
Both alloys are available as seamless and welded pipe, butt-welded, socket-welded, and threaded fittings, flanges, round, square, flat, and hexagonal bars, and plate and sheet. Custom dimensions are produced to project drawings, supporting complete marine and industrial piping systems from a single material family.
Material Certification and Traceability
Copper-nickel products are supplied with full traceability. Each shipment includes an EN 10204 3.1 mill test certificate documenting the chemical analysis, mechanical test results, and inspection data of the specific heat batch, confirming compliance with ASTM, EN, and project specifications.
Frequently Asked Questions
Q: What is the difference between C70600 and C71500?
A: C70600 is 90/10 with 10 percent nickel; C71500 is 70/30 with 30 percent nickel, offering higher strength and better erosion resistance in fast seawater.
Q: Why are copper-nickel alloys used in seawater?
A: They form a protective film in seawater and resist corrosion, erosion, and biofouling.
Q: What standards cover these alloys?
A: ASTM B111 for condenser tubes, B466 for pipe, B171 for plate, B151 for rod and bar, with ASME SB equivalents.
Q: What is an EN 10204 3.1 certificate?
A: It is a mill test certificate confirming chemical analysis, mechanical results, and inspection data for a specific heat batch.
Q: Which alloy is more economical?
A: C70600 90/10 has lower nickel content and is generally more economical for standard marine service.
Q: Can these alloys be welded?
A: Yes, both are weldable with copper-nickel filler metals using standard TIG, MIG, and MMA techniques.




