Jan 07, 2026 Leave a message

C12000-copper-alloy.pdf

C12000 Copper Alloy Grade Material

What is TP1/C12000 copper?

C12000 copper alloy belongs to the high-conductivity copper alloy series. Based on pure copper, it is optimized through the micro-addition of specific elements, combining excellent electrical conductivity, thermal conductivity, and workability. It is widely used in fields that demand stringent overall material performance.

Get C12000 Copper Spec Sheet

 

Chemical Composition

The C12000 copper alloy primarily consists of copper (Cu), typically with a content not less than 99.95%. It also contains trace amounts of elements such as phosphorus (P), silver (Ag), or magnesium (Mg). Among these, the addition of phosphorus significantly enhances the strength of the material in its annealed soft state while maintaining high electrical conductivity. The inclusion of silver further improves the material's resistance to softening, making it suitable for high-temperature environments. The micro-addition of magnesium helps refine the grain structure, enhancing workability. The precise proportioning of these elements enables C12000 to retain the high electrical conductivity of pure copper while offering improved mechanical strength and thermal stability.

 

Performance Characteristics

The C12000 copper alloy achieves an electrical conductivity of over 100% IACS and exhibits high thermal conductivity, making it suitable for power transmission and heat exchange applications. Its tensile strength is approximately 20% higher than that of pure copper, and its strength further increases after cold working while maintaining good ductility, enabling it to withstand complex deformation processing. Additionally, this material offers excellent corrosion resistance, ensuring long-term stability in humid or corrosive environments. It also features good weldability, facilitating engineering connections.

C12000 Pancake Coil Copper Pipe
C12000  Copper rod
C12000 Copper Plate
C12000 Copper strip

 

Application Scenarios

C12000 copper alloy is widely used in the power industry for applications such as high-voltage switch contacts, busbars, and cable connectors, ensuring low resistance and high current-carrying capacity. In the electronics field, it is used to manufacture integrated circuit lead frames, connectors, and heat sinks, meeting the demands for precision machining and efficient heat dissipation. In the telecommunications industry, it is employed to produce inner conductors for high-frequency coaxial cables, reducing signal loss. Furthermore, this material is suitable for mold manufacturing, aerospace, and other scenarios requiring a combination of material strength and electrical conductivity. Its comprehensive performance makes it a key foundational material in high-end equipment manufacturing.

 

Key Distinctions from Other Common Coppers:

vs. C11000 (ETP Copper - Electrolytic Tough Pitch):

C11000 contains oxygen (~0.04%). It is not recommended for welding or high-temperature reducing atmospheres (risk of hydrogen embrittlement). C12000 is preferred for welded applications.

vs. C12200 (Similar DHP Copper):

C12200 has a slightly higher phosphorus range. They are often considered interchangeable for many applications, but C12200 is more common for plumbing tube.

vs. C10100 / C10200 (Oxygen-Free Copper):

OF coppers have higher conductivity (101% IACS) and superior ductility. They are used for high-vacuum electronics and critical conductors. C12000 is more economical for general plumbing and heat exchangers.

 

Equivalent Grade Tables

Standard System Designation Name / Description
UNS (USA) C12000 The defining standard.
ASTM (USA) B152, B124 Specification for Sheet/Strip & Rod/Bar forms.
SAE (USA) SAE J461 Lists C12000 as a standard material.
CDA (Copper Dev. Assoc.) Alloy 120 Often called "Copper No. 120" or "Alloy 120".
EN (European) - Old CW024A Common former European designation.
EN (European) - New Cu-DHP The modern EN standard name (EN 1652, 12449).
ISO Cu-DHP ISO 431/1981 designation.
JIS (Japan) C1201 Very close equivalent.

Inquire about C12000  Pricing & Samples

 

Our product range

Product Category Key Product Forms Common Standards (Examples) Typical Applications / Features
Copper Rods & Bars Round Rods, Square Bars, Hexagonal Bars ASTM B187, C11000, C10200; EN 12163-66; JIS H3250 Electrical conductors, machined parts, connectors, hardware. Available in various tempers (soft, hard).
Copper Tubes & Pipes Seamless Tubes, Straight Lengths, Coils (for flexible tubes) ASTM B75, B280, B88; EN 12735; JIS H3300 Plumbing, HVAC/R, heat exchangers, medical gas lines, hydraulic systems.
Copper Plates & Sheets Plates (>6mm thickness), Sheets (<6mm thickness) ASTM B152, C11000; EN 1652; JIS H3100 Architectural cladding, industrial fabrication, grounding plates, chemical processing.
Copper Strips & Foils Strips, Rolls, Precision Foils ASTM B272, C11000; EN 1652; JIS H3100 Electrical contacts, transformers, shielding, gaskets, decorative inlays.
Copper Wires Bare Copper Wire, Stranded Wire, Busbars ASTM B1, B3, B187; EN 13601; JIS H3260 Windings, cables, busbars, fasteners, welding electrodes.

 

Our factory

We are a specialized manufacturer of premium copper products, including rods, tubes, plates, bars, wires, and strips. Our factory strictly adheres to international standards such as ASTM, EN, JIS, and GB, ensuring material compliance for global markets. Equipped with modern production lines-including continuous casting for rods, cold drawing machines for tubes, and precision rolling mills for strips-we maintain tight control over dimensions and tolerances. Every batch undergoes rigorous in-house testing using spectrometers for chemical composition, tensile testers for mechanical properties, and eddy current testers for defect detection. Our dedicated quality lab guarantees traceable, reliable products for electrical, automotive, and engineering applications worldwide. 

Annealed Copper Tube

Get Fast Quote & Logistics Plan

 

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry