Copper Type K L M Pipe Size PDF
Products Description
Unalloyed copper or oxygen free coppers have good corrosion resistance and high thermal and electrical properties. Unalloyed coppers of different grades vary based on the amount of impurities present, and have different characteristics. UNS designations of commercially available pure copper are C10100 to C13000. These oxygen free coppers are suitable for applications, which require ductility and high conductivity.
Chemical Composition and Standards
According to ASTM B152/B152M standards, the chemical composition requirements for C10100 are as follows (mass percentage):
Copper (Cu): ≥99.99% (total impurities ≤0.01%);
Phosphorus (P): 0.004%~0.012% (deoxidizer, residual amount strictly controlled);
Oxygen (O): ≤0.0005% (far lower than the oxygen content of ordinary copper);
Other impurities: such as iron (Fe), lead (Pb), sulfur (S), etc., are limited to trace levels.
Note: The corresponding grade in the Chinese national standard is TP2 phosphorus-deoxidized copper (GB/T 5231-2012), and its performance parameters are basically the same as those of C10100.
Physical Properties
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8.89 - 8.94 g/cm3 | 0.321 - 0.323 lb/in3 |
| Melting point | 1083°C | 1981°F |
Specifications of Copper C10100 Pipes
| Standard | ASTM B111 / ASTM B75 / ASTM B280 / ASTM B68 / ASME SB111 / ASME SB75 / ASME SB280 / ASME SB68 |
|---|---|
| Material | Copper |
| Outer Diameter(OD) | 4mm-150mm |
| Wall Thickness : | 0.25mm-8mm |
| Length | 1 meter-6 meter or as required |
| Types | Seamless Pipes, Pipe / Light Drawn Pipe / Light Annealed Pipe / Bright Pipe / Annealed Pipe, Annealed Pipe, Full Annealed Pipe, Hard Drawn Pipes |
| Application | 1. Pancake Coil for ACR, General Engineering Applications 2. LWC Coil for ACR, General Engineering Applications 3. Straight Copper Pipe for ACR and Refrigeration 4. Inner-grooved copper Pipe for ACR and Refrigeration 5. Copper Pipe for Transportation System of water, gas and oil 6. Semi-finished Copper Pipe for industrial applications |
Products Description
Q: What certifications should I look for when purchasing C10100?
A: Request a certified Mill Test Certificate that reports the chemical composition (especially Cu+Ag and O content) and electrical conductivity tests.
Q: Are there special requirements for annealing C10100?
A: Yes, it must be annealed in a protective atmosphere (e.g., vacuum, nitrogen, or hydrogen) to prevent oxidation and maintain its bright surface and high purity.
Q: Why is C10100 more expensive than other coppers?
A: The cost is higher due to the complex manufacturing processes and stringent controls required to achieve and maintain its extremely low levels of impurities and oxygen.
Q: Can C10100 be used for busbars in the electrical power industry?
A: It can, but it is typically reserved for extreme, specialized applications where maximum conductivity is critical (e.g., current leads for large superconductors). For most power applications, the lower cost of C11000 or C10200 is sufficient.
Q: How can I verify if a material is genuine C10100?
A: The only reliable method is through material testing. Perform chemical analysis to verify purity and oxygen content, and conduct a conductivity test (e.g., using an eddy current conductometer) to confirm it meets 101% IACS.
About us
GNEE is a leading international trader and supplier specializing in a comprehensive range of high-quality copper and copper alloy products. We serve a global clientele across various industries, including HVAC/R, automotive, electronics, construction, and industrial manufacturing.
Our Extensive Product Portfolio
We boast a vast inventory and robust supply chain for virtually all forms of copper products. Our expertise covers:
Copper Seamless Tube / Capillary Copper Tube
Copper Welded Tube / Copper Air Conditioning Tube
Copper Refrigeration Tube / Copper Water Tube
Deoxidized Copper Tube / Copper Coil Tube
Copper Sheets & Plates&Strips：
Copper Strip / Copper Thin Strip
Copper Heavy Duty Strip / Precision Copper Strip
Copper Foil Sheet / Copper Thin Sheet
Copper Thick Plate / Copper Chequered Plate
Copper Shim Stock / Copper Busbar
Copper Round Bar / Copper Square Bar
Copper Hexagon Bar / Copper Flat Bar
Copper Alloy Rod / C11000 Electrolytic Tough Pitch (ETP) Copper Rod
Copper Wire / Bare Copper Wire
Copper Alloy Wire / Oxygen-Free Copper Wire
Copper Profiles / Copper Fittings
Material Grades & International Standards
We provide materials that conform to major international standards to ensure performance, reliability, and global acceptance. Commonly supplied grades and standards include:
Common Grades:
Pure Copper: C10100 (Oxygen-Free Electronic Copper), C10200 (Oxygen-Free Copper), C11000 (Electrolytic Tough Pitch - ETP Copper)
Copper Alloys:
Brass: C26000 (Cartridge Brass), C27200 (Brass), C36000 (Free-Cutting Brass), C38500 (Architectural Bronze)
Phosphor Bronze: C51000
Aluminum Bronze: C60800
Copper-Nickel: C70600 (CuNi 90/10)
Admiralty Brass: C44300
ASTM Standards:
B68 / B68M: Seamless Copper Tube
B75 / B75M: Seamless Copper Pipe
B111 / B111M: Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
B152 / B152M: Copper Sheet, Strip, Plate, and Rolled Bar
B187 / B187M: Copper Bus Bar, Rod, and Shapes
B301: Free-Cutting Brass Rod
