GNEE can provide the form
UNS C11000 Bar Thickness Chart
| Wall Thickness (mm) | Nominal Wall Thickness (Inch) |
|---|---|
| 3.175 | 0.125" |
| 9.525 | 0.375" |
| 15.875 | 0.625" |
| 25.400 | 1" |
| 38.100 | 1.500" |
| 6.350 | 0.250" |
| 19.050 | 0.750" |
| 12.700 | 0.500" |
| 31.750 | 1.250" |
| 50.800 | 2" |
C11000 Copper Round Bar Size Chart
| Standard US Size's (Thk x Width x Length) | Metric Sizes |
|---|---|
| .094" x 1" x 144" | 5 mm x 20 mm |
| .125" x 2" x 144" | 5 mm x 40 mm |
| .125" x 4" x 144" | 10 mm x 20 mm |
| .250" x 2" x 144" | 10 mm x 40 mm |
| .250" x 4" x 144" | 10 mm x 80 mm |
| .250" x 6" x 144" | 10 mm x 140 mm |
| .375" x 2" x 144" | - |
| .375" x 4" x 144" | - |
| .500" x 2" x 144" | - |
| .125" x 1" x 144" | 5 mm x 30 mm |
| .250" x 1" x 144" | 10 mm x 30 mm |
| .375" x 3" x 144" | - |
| .250" x 5" x 144" | 10 mm x 100 mm |
| .125" x 3" x 144" | 5 mm x 50 mm |
| .250" x 3" x 144" | 10 mm x 50 mm |
| .375" x 5" x 144" | - |
| .500" x 3" x 144" | - |
UNS C11000 Rod Surface Finishes
Mill
Brushed
Plated
Polished
Anodized
UNS C11000 Copper Square Bar Equivalent Grades
| Standard | Electrolytic Tough Pitch (ETP) |
|---|---|
| BS | C101 |
| ASTM | C11000 |
| IS | IS 6912 – ETP, IS191 – CuETP |
| EN | CW004A |
| JIS | H3250(92)-C1100 BE |
| DIN |
2.006 |
| ISO | R1337-CuETP |
C11000 Bar Fabrication Properties
| Fabrication Properties | Suitability |
|---|---|
| Rating of Machinability | 20% free Cutting Brass |
| Capacity for Cold Working | Excellent |
| Rating of Hot Forging | 65% Forging Brass |
| Temperature for Annealing | 375°C - 650°C |
| Capacity for Hot Working | Excellent |
| Temperature of Hot Working | 750°C - 875°C |
| Finish | Excellent |
C11000 Copper Round Bar Mechanical Properties
| Properties | Imperial | Metric |
|---|---|---|
| Elastic modulus | 16969 ksi | 115 - 117 GPa |
| Poisson's ratio | 0.34 | 0.34 |
| Hardness, Rockwell F | 80 | |
Products provided by GNEE
| Product Form | Main Alloy / UNS Number (Select Common Grades) | Common ASTM Standards | Thickness / Diameter | Width / OD | Length | Surface Finish |
|---|---|---|---|---|---|---|
| Copper Tube/Pipe | C10100, C10200, C10300, C10800, C11000, C12000, C12200, C14200, C19200, C23000, C44300, C68700, C70600, C71500 | B75, B88, B111, B280, B395, B543 | 0.012" - 0.125" (0.3mm - 3.2mm) Wall | 1/8" - 6" (3.2mm - 152mm) OD | Straight: 10ft - 20ft (3m - 6m) Coils: Custom |
Drawn (Bright), Annealed (Soft), Bare, Tin-Plated |
| Copper Sheet/Plate | C10100, C10200, C11000, C11300, C11400, C11600, C12200, C14200, C19200, C22000, C26000, C26800, C27000, C51000, C52100, C54400, C63000, C77000 | B152, B370, B36 | Sheet: 0.006" - 0.188" (0.15mm - 4.8mm) Plate: > 0.188" (4.8mm) |
12" - 48" (305mm - 1220mm) or more | 36" - 144" (914mm - 3658mm) or more | Mill Finish, Polished (Mirror), Brushed, Oxidized, Pre-painted |
| Copper Bar/Rod | C10100, C11000, C11300, C11400, C11600, C14500, C14700, C15000, C15700, C18200, C18400, C18700, C36000, C46400, C48500, C63000, C64200, C65500, C67300, C67400 | B124, B16, B98, B138, B139, B196, B301 | Round: 1/8" - 6" (3mm - 150mm) Dia. Flat Bar: 1/4" - 12" (6mm - 305mm) Wide |
N/A for Rounds | 12ft - 20ft (3.6m - 6m) Standard | Drawn (Bright), Turned & Polished, Hot Rolled, Sand Blasted |
| Copper Wire | C10100, C10200, C11000, C11300, C11400, C11600, C15500, C16200, C21000, C22000, C23000, C26000, C27000, C51000, C52100, C54400, C63000, C77000 | B1, B2, B3, B105, B134, B159, B197 | 0.010" - 0.500" (0.25mm - 12.7mm) Dia. | N/A | Coils: 1lb to several thousand lbs | Bare (Bright), Annealed (Soft), Tin-Plated, Nickel-Plated, Enameled |
| Copper Foil | C10100, C10200, C11000, C11300, C11400, C11600 | B370, B152 (Often follows IPC-4101) | 0.0005" - 0.010" (12µm - 250µm) | 18" - 48" (457mm - 1220mm) | Rolls: 500ft - 5000ft (150m - 1500m) | Electrodeposited (ED), Rolled & Annealed (RA), Double-Treat |
