GNEE can provide the form
C70600 CU-NI 90/10 Copper Tube
ASTM B466 C70600 Copper Nickel Pipes
ASTM B111 C70600 Copper Nickel 90/10, also known as Cupronickel 90/10, is a copper alloy with a composition of approximately 90% copper and 10% nickel, along with trace amounts of other elements.
Composition:
Copper (Cu): Approximately 88.6-90.4%
Nickel (Ni): Approximately 9-11%
Iron (Fe): Maximum 1.8%
Manganese (Mn): Maximum 1%
Mechanical Properties:
Tensile Strength: Typically ranges from 310 MPa (45,000 psi) to 480 MPa (70,000 psi)
Yield Strength: Generally around 105-240 MPa (15,000-35,000 psi)
Elongation: Typically 25-35%










Physical Properties:
Density: Approximately 8.94 g/cm³ (0.323 lb/in³)
Melting Point: Approximately 1170-1240°C (2140-2260°F)
Products Description
Corrosion Resistance: C70600 Copper Nickel 90/10 exhibits excellent resistance to corrosion in various environments, especially seawater and brackish water. It is highly resistant to biofouling, erosion, and stress corrosion cracking, making it suitable for marine and offshore applications.
Machinability: Copper Nickel 90/10 is known for its good machinability, allowing for ease of fabrication and machining processes. However, its high strength and work hardening characteristics may require appropriate machining techniques and tools.
C70600 Copper Nickel 90/10 is an alloy in the copper nickel family of alloys. The alloy is extremely versatile known for its high heat transfer, ductility, and corrosion resistance. Copper-nickel (also known as cupronickel) alloys are widely used for marine applications due to their excellent resistance to seawater corrosion, low macrofouling rates, and good fabricability. They have provided reliable service for decades while offering effective solutions to today's technological challenges.
C70600 Copper Nickel 90/10 according to the following standards:
ASME SB-111
ASME SB-466
ASTM B-111
ASTM B-466
MIL-T-15005f
MIL-T-16420k Class 200, 700, 1650, 3300, and 6000
Uses and Applications:
Marine and Offshore Applications: C70600 Copper Nickel 90/10 is extensively used in marine environments due to its exceptional resistance to seawater corrosion. It is utilized in seawater cooling systems, heat exchangers, condensers, piping, fittings, and shipbuilding components.
Heat Exchangers and Condensers: The excellent thermal conductivity and corrosion resistance of Copper Nickel 90/10 make it suitable for heat exchangers, condensers, and similar applications in various industries, including power generation, chemical processing, and HVAC systems.
Desalination Plants: C70600 Copper Nickel 90/10 is employed in desalination plants for its resistance to both seawater corrosion and biofouling. It is used in heat exchangers, tubing, and piping systems for efficient and reliable operation.
Offshore Oil and Gas Industry: The corrosion resistance and mechanical strength of Copper Nickel 90/10 make it suitable for offshore oil and gas applications, including piping, tubing, and components in subsea systems, platforms, and pipelines.
Automotive Industry: Copper Nickel 90/10 finds application in automotive cooling systems, specifically in radiators, heater cores, and oil coolers, due to its corrosion resistance and thermal conductivity.
Coinage: Copper Nickel 90/10 is used in the manufacturing of coins and coinage due to its durability, resistance to wear, and attractive appearance.
Industrial Applications: It is also utilized in various industrial applications such as condenser plates, power plant water boxes, and chemical process equipment where corrosion resistance and thermal conductivity are essential.
Products provided by GNEE
| Product Form | Main Alloy / UNS Number (Select Common Grades) | Common ASTM Standards | Thickness / Diameter | Width / OD | Length | Surface Finish |
|---|---|---|---|---|---|---|
| Copper Tube/Pipe | C10100, C10200, C10300, C10800, C11000, C12000, C12200, C14200, C19200, C23000, C44300, C68700, C70600, C71500 | B75, B88, B111, B280, B395, B543 | 0.012" - 0.125" (0.3mm - 3.2mm) Wall | 1/8" - 6" (3.2mm - 152mm) OD | Straight: 10ft - 20ft (3m - 6m) Coils: Custom |
Drawn (Bright), Annealed (Soft), Bare, Tin-Plated |
| Copper Sheet/Plate | C10100, C10200, C11000, C11300, C11400, C11600, C12200, C14200, C19200, C22000, C26000, C26800, C27000, C51000, C52100, C54400, C63000, C77000 | B152, B370, B36 | Sheet: 0.006" - 0.188" (0.15mm - 4.8mm) Plate: > 0.188" (4.8mm) |
12" - 48" (305mm - 1220mm) or more | 36" - 144" (914mm - 3658mm) or more | Mill Finish, Polished (Mirror), Brushed, Oxidized, Pre-painted |
| Copper Bar/Rod | C10100, C11000, C11300, C11400, C11600, C14500, C14700, C15000, C15700, C18200, C18400, C18700, C36000, C46400, C48500, C63000, C64200, C65500, C67300, C67400 | B124, B16, B98, B138, B139, B196, B301 | Round: 1/8" - 6" (3mm - 150mm) Dia. Flat Bar: 1/4" - 12" (6mm - 305mm) Wide |
N/A for Rounds | 12ft - 20ft (3.6m - 6m) Standard | Drawn (Bright), Turned & Polished, Hot Rolled, Sand Blasted |
| Copper Wire | C10100, C10200, C11000, C11300, C11400, C11600, C15500, C16200, C21000, C22000, C23000, C26000, C27000, C51000, C52100, C54400, C63000, C77000 | B1, B2, B3, B105, B134, B159, B197 | 0.010" - 0.500" (0.25mm - 12.7mm) Dia. | N/A | Coils: 1lb to several thousand lbs | Bare (Bright), Annealed (Soft), Tin-Plated, Nickel-Plated, Enameled |
| Copper Foil | C10100, C10200, C11000, C11300, C11400, C11600 | B370, B152 (Often follows IPC-4101) | 0.0005" - 0.010" (12µm - 250µm) | 18" - 48" (457mm - 1220mm) | Rolls: 500ft - 5000ft (150m - 1500m) | Electrodeposited (ED), Rolled & Annealed (RA), Double-Treat |




