Aug 27, 2025 Leave a message

ASTM B111 C60800 Aluminum Bronze Resists Seawater Corrosion and Cavitation Erosion

ASTM B111 Copper Tube PDF

 

Material Overview of ASTM B111 C60800 Copper Tube

C61300 is a high-strength copper-based alloy, classified within the ASTM standard system (UNS numbering system) and within the aluminum-bronze alloy family. It is based on a copper (Cu) matrix (88.5%-91.5%), reinforced by the addition of aluminum (Al, 6%-7.5%), iron (Fe, 2%-3%), and nickel (Ni, ≤0.15%). This alloy combines high strength with wear and corrosion resistance. This alloy complies with standards such as ASTM B150 (bar) and ASTM B169 (plate). It is widely used in the manufacture of critical components in heavy-duty or corrosive environments in the marine, chemical, and energy industries.

 

Chemical Composition of ASTM B111 C60800 Heat Exchanger Copper Tubing

The chemical composition of C61300 is designed to balance mechanical properties and corrosion resistance:
Aluminum (Al): 6%-7.5% forms β-phase (Cu₃Al) to enhance strength and a dense Al₂O₃ oxide film to enhance corrosion resistance.
Iron (Fe): 2%-3% refines grain size and suppresses spontaneous temper brittleness. Excessive amounts can lead to precipitation of the brittle Fe₃Al₂ phase.
Nickel (Ni): ≤0.15% improves high-temperature stability and creep resistance.
Impurity Control: Strict limits are imposed on lead (Pb ≤ 0.01%) and phosphorus (P ≤ 0.015%) to prevent hot working cracking and grain boundary weakening.
The metallurgical process utilizes electric arc furnace melting followed by continuous casting and rolling, achieving a grain size of ASTM Grade 5 or higher, ensuring microstructure uniformity.

ASTM B111 C60800 type l copper tubing
ASTM B111 C60800 type k copper pipe
ASTM B111 C60800 type k copper tubing
ASTM B111 C60800 copper pipe for ac

Physical and Mechanical Properties of ASTM B111 C60800 Copper Plumbing

Physical Properties:
Density: 7.7-7.95 g/cm³, close to common copper alloys, facilitating lightweight design.
Melting Point: 1025-1040°C, Thermal Conductivity: 55-65 W/(m·K), suitable for high-temperature heat dissipation components.
Coefficient of Thermal Expansion: 16.2×10⁻⁶/°C (20-300°C), compatible with most metal substrates.

 

Mechanical Properties:
Tensile Strength: 450-690 MPa (depending on heat treatment), Yield Strength: 210-400 MPa, Elongation: 15%-42%.
Hardness: Brinell Hardness: 180-220 HB, increaseable to HRC 25-30 after quenching and tempering. Fatigue strength: 180-193 MPa (10⁷ cycles), wear resistance 2-3 times that of tin bronze.

 

Environmental Resistance and Special Advantages of ASTM B111 C60800 Copper Reptile

Corrosion Resistance:
Seawater corrosion resistance: Annual corrosion rate <0.05 mm, suitable for marine engineering components such as propellers and marine valves.
Chemical Resistance: Resistant to sulfuric acid, nitric acid, and alkaline solutions, with a corrosion rate of less than 0.1 mm/year in 70% nitric acid.

High-Temperature Performance: Mechanical properties are stable below 400°C, with short-term temperature resistance up to 600°C (oxide film protection).

Non-sparking: No sparks are generated under impact, making it suitable for explosion-proof tools on oil platforms.

Shape Memory Effect: Can be restored to its original shape through heat treatment, making it suitable for intelligent structural components.

 

Processing and Manufacturing of ASTM B111 C60800 Type K Copper Pipe

Hot Working: Forging temperature 1000-1200°C, final forging temperature ≥850°C to avoid low-temperature brittleness.
Cold Forming: Annealed hardness ≤ 180 HB, cold rolling and stamping (deformation ≤ 20%) supported.
Welding: Suitable for TIG/GMAW, ERNiCrMo-3 welding wire is recommended. Solution treatment (1050-1150°C) is required after welding.

Heat Treatment Specifications:

1. Solution Treatment: Rapid cooling at 1050-1150°C to dissolve and separate phases.

2. Aging: Hold at 700-750°C for 8-24 hours to improve hardness and wear resistance.

 

Applications of ASTM B111 C60800 Type L Copper

Shipbuilding and Offshore Engineering: Propellers, seawater pump shafts, marine valves, and resistance to seawater corrosion and cavitation. Petrochemicals: Cracking furnace pigtails and valve seals, resisting sulfide stress corrosion.
Energy and Power: Nuclear power steam generator heat transfer tubes and boiler superheater brackets, resistant to high temperatures and high pressures.
Mechanical Manufacturing: Gears, bearings, worm gears, and high-load wear-resistant components replace tin bronze or stainless steel.
Aerospace: High-temperature engine seals and landing gear bearings, reducing weight and providing fatigue resistance.

why choose us
 
copper water supply line

Professional copper pipe supplier

 

As a professional enterprise dedicated to global copper product, GNEE Metal Group deeply recognizes the quality and responsibility embodied in the ASTM B111 standard. This standard not only specifies chemical composition and mechanical properties but also represents a comprehensive quality commitment spanning manufacturing processes to testing and verification. GNEE solemnly assures global customers that every ASTM B111-standard condenser tube and copper alloy tubing we supply will strictly adhere to its requirements for seamless manufacturing, annealing treatment, eddy current testing, and various mechanical performance tests. 

 

Contact us today for a quotation:sales@gneesteel.com

 

Packaging and shipping

 

GNEE offers professional packaging for exported copper pipes. First, we apply anti-rust oil and plastic film to prevent oxidation. Then, we securely strap with steel straps and add corner protectors. Finally, we place the pipes on wooden pallets and reinforce them with iron or wooden boxes, ensuring they are moisture-proof and impact-resistant during ocean transport, while facilitating easy loading and unloading. All packaging meets export standards. 

copper water tube
hollow copper tube
thick wall copper tubing
copper alloy pipe
flexible copper pipe for ac

Customer visits

 
red copper pipe
copper hose pipe
bending copper water pipe
copper pipe for drinking water
copper pipe hard drawn
copper pipe for heating
copper sprinkler pipe
micro copper pipe
copper pipe
copper tube

 

 

 

GNEE participated in the exhibition

 

 

copper hose

Send Inquiry

whatsapp

Phone

E-mail

Inquiry