C60800 aluminum bronze is a specialized copper alloy containing 5.0-7.0% aluminum with a trace addition of iron. Its excellent electrical conductivity and softening resistance make it a unique choice for power transmission and electronic packaging. Unlike other aluminum bronzes in the C63X series, C60800 achieves an optimal balance of electrical conductivity and strength through precisely controlled microstructure.
Core Performance of ASTM B111 C60800 Thin Wall Copper Tubing
High Conductivity: Conductivity reaches 45% IACS (International Annealed Copper Standard), three times that of ordinary aluminum bronze.
Softening Resistance: Maintains 90% of room-temperature strength at 300°C, with a recrystallization temperature of 450°C.
Environmental Stability: Corrosion rate <0.3μm/year in sulfur-containing atmospheres, surface oxide film resistance <10Ω·cm².
TEM analysis revealed that nanoscale FeAl₃ precipitates (5-15nm in size) ensure continuity of electron transport channels and provide effective dislocation pinning, which is the key to its performance combination.




Precision Manufacturing Process for ASTM B111 C60800 Thin Wall Copper Pipe
Ultra-pure Melting:
Vacuum deoxidation (oxygen content <5ppm)
Aluminum content controlled at 6.0±0.2%, iron content 0.8-1.2%
Thermomechanical Treatment:
Hot rolling at 850°C followed by rapid water quenching (cooling rate >200°C/s)
Multi-pass cold rolling (total deformation 80-90%)
Special Heat Treatment:
Two-stage annealing: 550°C for 1 hour for stress relief, followed by 400°C for 4 hours for stabilization.
Bright annealing with a protective atmosphere dew point <-40°C.
A specially developed electrolytic polishing process reduces surface roughness to Ra 0.05μm and reduces contact resistance by 60%.
Key Applications of ASTM B111 C60800 Thick Wall Copper Tubing
Power Transmission:
High-voltage switch contacts (electrical life up to 100,000 cycles)
Substation grounding grid materials (soil corrosion resistant)
Wind turbine slip ring assemblies (contact resistance <0.5mΩ)
Electronic Packaging:
High-power LED substrates (thermal conductivity 180W/m·K)
RF connector housings (cutoff frequency up to 40GHz)
Semiconductor device carriers (high-temperature dimensional change <0.01%)
Specialty Conductors:
Magnetic levitation train collector rails (wear rate <0.1mm/1,000km)
Nuclear fusion device lining materials (neutron irradiation resistance)
Spacecraft electromagnetic shielding (SE >120dB)
In UHVDC transmission projects, C60800 contact material increases conversion efficiency to 99.92%, reducing annual losses by 15 million kWh.
why choose us

Professional copper pipe supplier
As a professional enterprise dedicated to global copper product, GNEE Metal deeply recognizes the quality and responsibility embodied in the ASTM B111 standard. This standard not only specifies chemical composition and mechanical properties but also represents a comprehensive quality commitment spanning manufacturing processes to testing and verification. GNEE solemnly assures global customers that every ASTM B111-standard condenser tube and copper alloy tubing we supply will strictly adhere to its requirements for seamless manufacturing, annealing treatment, eddy current testing, and various mechanical performance tests.
Contact us today for a quotation:sales@gneesteel.com
Packaging and shipping
GNEE offers professional packaging for exported copper pipes. First, we apply anti-rust oil and plastic film to prevent oxidation. Then, we securely strap with steel straps and add corner protectors. Finally, we place the pipes on wooden pallets and reinforce them with iron or wooden boxes, ensuring they are moisture-proof and impact-resistant during ocean transport, while facilitating easy loading and unloading. All packaging meets export standards.





Customer visits










GNEE participated in the exhibition





