GNEE can provide the form
Core Advantages
1. High Corrosion Resistance: Performs well in water, steam, and mild chemical environments.
2. Ease of Fabrication: Excellent for stamping, bending, and machining.
3. Decorative Flexibility: Reddish-gold color ideal for architectural and artistic designs.
4. Cost Efficiency: Affordable alternative to higher-copper alloys for non-critical applications.
Product Applications
Plumbing: Valves, fittings, and water supply tubes.
Architecture: Decorative trims, door hardware, and lighting fixtures.
Electrical: Low-voltage connectors, switch components, and terminals.
Marine: Non-critical marine hardware and decorative fittings.
Industrial: Bushings, fasteners, and stamped parts.
Processing Considerations
Annealing: 450–600°C to restore ductility after cold working.
Machining: Use sharp tools and coolants to prevent material adhesion.
Welding: Compatible with TIG and soldering; avoid overheating to prevent zinc vaporization.
Surface Treatment: Polishing or clear coating recommended to preserve aesthetic appeal.
Key Application Scenarios
Residential and commercial plumbing systems.
Architectural restoration projects requiring vintage aesthetics.
Low-stress marine components in freshwater environments.
Consumer electronics with decorative metal accents.
FAQ
Q1: Can C23000 be used in potable water systems?
A: Yes, it is commonly used for water supply lines and fittings due to its corrosion resistance.
Q2: How does C23000 compare to C22000 brass?
A: C23000 has lower copper content (85% vs. 90%), reducing cost but offering similar machinability and slightly lower corrosion resistance.
Q3: Is C23000 suitable for brazing?
A: Yes, but use low-temperature brazing alloys to avoid damaging the zinc content.
Products provided by GNEE
| Product Category | Standards | Available Grades | Size Range | Key Applications |
|---|---|---|---|---|
| Copper Tube/Pipe | ASTM B75, B88, B280, EN 1057 | All Grades Available: C11000, C10200, C12000, C12200, C10100, C26000, C26800, C28000, C36000, C38500, C51000, C51900, C52100, C54400, C70600, C71500, C75200, C77000, C17200, C17500, C17510 |
OD: 6mm - 159mm Wall Thickness: 0.5mm - 5mm Length: Straight 1-6m, Coils up to 50m |
Plumbing, HVACR, Heat Exchangers, Industrial Piping |
| Copper Sheet/Plate | ASTM B152, B152M, EN 1652 | All Grades Available: C11000, C10200, C12000, C12200, C10100, C26000, C26800, C28000, C36000, C38500, C51000, C51900, C52100, C54400, C70600, C71500, C75200, C77000, C17200, C17500, C17510 |
Thickness: 0.3mm - 50mm Width: 300mm - 1200mm Length: 1000mm - 3000mm |
Architecture, Electrical Components, Fabrication, Decorative |
| Copper Rod/Bar | ASTM B187, B16, B124, EN 12163 | All Grades Available: C11000, C10200, C12000, C12200, C10100, C26000, C26800, C28000, C36000, C38500, C51000, C51900, C52100, C54400, C70600, C71500, C75200, C77000, C17200, C17500, C17510 |
Diameter: 3mm - 300mm Length: 1000mm - 4000mm |
Machined Parts, Fasteners, Busbars, Structural Components |
| Copper Wire | ASTM B1, B3, B174, EN 13601 | All Grades Available: C11000, C10200, C12000, C12200, C10100, C26000, C26800, C28000, C36000, C38500, C51000, C51900, C52100, C54400, C70600, C71500, C75200, C77000, C17200, C17500, C17510 |
Diameter: 0.05mm - 12mm Form: Bare, Tinned, Stranded |
Electrical Windings, Cables, Conductors, Fasteners |
| Copper Strip | ASTM B152, B122, B103, EN 1652 | All Grades Available: C11000, C10200, C12000, C12200, C10100, C26000, C26800, C28000, C36000, C38500, C51000, C51900, C52100, C54400, C70600, C71500, C75200, C77000, C17200, C17500, C17510 |
Thickness: 0.05mm - 3.0mm Width: 10mm - 500mm |
Electronics, Connectors, Springs, Decorative Trim |
