GNEE can provide the form
What is Copper C11000 pipe?
Copper C11000, or electrolytic tough pitch (ETP) copper, is a high-purity copper alloy containing 99.90% Cu and small impurities. It is characterized by very good electrical and thermal conductivity, corrosion resistance, and good ductility. The mechanical properties of C11000 pipes include tensile strength of about 200–400 MPa, yield strength of about 50–275 MPa, and elongation of 10–45%, varying with temper. The material is readily fabricated, soldered, and welded and thus suited to electrical, plumbing, and industrial uses demanding high conductivity and strength.
Copper C11000 Pipe Specifications
| Standard | ASTM B111 / ASTM B75 / ASTM B280 / ASTM B68 / ASME SB111 / ASME SB75 / ASME SB280 / ASME SB68 |
|---|---|
| Material | Copper |
| Outer Diameter(OD) | 4mm-150mm |
| Wall Thickness : | 0.25mm-8mm |
| Length | 1 meter-6 meter or as required |
| Types | Seamless Pipes, Pipe / Light Drawn Pipe / Light Annealed Pipe / Bright Pipe / Annealed Pipe, Annealed Pipe, Full Annealed Pipe, Hard Drawn Pipes |
| Application | 1. Pancake Coil for ACR, General Engineering Applications 2. LWC Coil for ACR, General Engineering Applications 3. Straight Copper Pipe for ACR and Refrigeration 4. Inner-grooved copper Pipe for ACR and Refrigeration 5. Copper Pipe for Transportation System of water, gas and oil 6. Semi-finished Copper Pipe for industrial applications |
Copper C11000 pipe Chemical Composition
| Grade | Cu | O |
| Copper C11000 | 99.90 min | 0.0400 |
Copper C11000 pipe Mechanical Properties
| Density (lb / cu. in.) | Electrical Resistivity (microhm-cm (at 68 Deg F)) | Mean Coeff Thermal Expansion | Modulus of Elasticity Tension |
| 0.323 | 12.2 | 9.4 | 17000 |
Copper C11000 Pipe Thickness Chart
| (mm) | Outside Diameter (mm) |
Table Y Half hard an annealed tube |
Table X Half hard light gauge tube |
Table Z Hard drawn thin wall tube |
|||
|---|---|---|---|---|---|---|---|
| Maximum Working Pressure (N/mm2) |
Thickness (mm) |
Maximum Working Pressure (N/mm2) |
Thickness (mm) |
Maximum Working Pressure (N/mm2) |
Thickness (mm) |
||
| 8 | 8 | 10.5 | 0.8 | 9.7 | 0.6 | 9.8 | 0.5 |
| 6 | 6 | 14.4 | 0.8 | 13.3 | 0.6 | 11.3 | 0.5 |
| 10 | 10 | 8.2 | 0.8 | 7.7 | 0.6 | 7.8 | 0.5 |
| 15 | 15 | 6.7 | 1 | 5.8 | 0.7 | 5 | 0.5 |
| 12 | 12 | 6.7 | 0.8 | 6.3 | 0.6 | 6.4 | 0.5 |
| 18 | 18 | 5.5 | 1 | 5.6 | 0.8 | 5 | 0.6 |
| 28 | 28 | 4.2 | 1.2 | 4 | 0.9 | 3.2 | 0.6 |
| 22 | 22 | 5.7 | 1.2 | 5.1 | 0.9 | 4.1 | 0.6 |
| 35 | 35 | 4.1 | 1.5 | 4.2 | 1.2 | 3 | 0.7 |
| 54 | 54 | 3.6 | 2 | 2.7 | 1.2 | 2.5 | 0.9 |
| 159 | 159.4 | 1.5 | 2 | 1.5 | 1.5 | ||
| 42 | 42 | 3.4 | 1.5 | 3.5 | 1.2 | 2.8 | 0.8 |
| 67 | 67 | 2.8 | 2 | 2 | 1.2 | 2 | 1 |
| 108 | 108.1 | 2.2 | 2.5 | 1.7 | 1.5 | 1.7 | 1.2 |
| 76.1 | 76.2 | 2.5 | 2 | 2.4 | 1.5 | 1.9 | 1.2 |
| 133 | 133.4 | 1.4 | 1.5 | 1.6 | 1.5 | ||
Products provided by GNEE
| Product Form | Main Alloy / UNS Number (Select Common Grades) | Common ASTM Standards | Thickness / Diameter | Width / OD | Length | Surface Finish |
|---|---|---|---|---|---|---|
| Copper Tube/Pipe | C10100, C10200, C10300, C10800, C11000, C12000, C12200, C14200, C19200, C23000, C44300, C68700, C70600, C71500 | B75, B88, B111, B280, B395, B543 | 0.012" - 0.125" (0.3mm - 3.2mm) Wall | 1/8" - 6" (3.2mm - 152mm) OD | Straight: 10ft - 20ft (3m - 6m) Coils: Custom |
Drawn (Bright), Annealed (Soft), Bare, Tin-Plated |
| Copper Sheet/Plate | C10100, C10200, C11000, C11300, C11400, C11600, C12200, C14200, C19200, C22000, C26000, C26800, C27000, C51000, C52100, C54400, C63000, C77000 | B152, B370, B36 | Sheet: 0.006" - 0.188" (0.15mm - 4.8mm) Plate: > 0.188" (4.8mm) |
12" - 48" (305mm - 1220mm) or more | 36" - 144" (914mm - 3658mm) or more | Mill Finish, Polished (Mirror), Brushed, Oxidized, Pre-painted |
| Copper Bar/Rod | C10100, C11000, C11300, C11400, C11600, C14500, C14700, C15000, C15700, C18200, C18400, C18700, C36000, C46400, C48500, C63000, C64200, C65500, C67300, C67400 | B124, B16, B98, B138, B139, B196, B301 | Round: 1/8" - 6" (3mm - 150mm) Dia. Flat Bar: 1/4" - 12" (6mm - 305mm) Wide |
N/A for Rounds | 12ft - 20ft (3.6m - 6m) Standard | Drawn (Bright), Turned & Polished, Hot Rolled, Sand Blasted |
| Copper Wire | C10100, C10200, C11000, C11300, C11400, C11600, C15500, C16200, C21000, C22000, C23000, C26000, C27000, C51000, C52100, C54400, C63000, C77000 | B1, B2, B3, B105, B134, B159, B197 | 0.010" - 0.500" (0.25mm - 12.7mm) Dia. | N/A | Coils: 1lb to several thousand lbs | Bare (Bright), Annealed (Soft), Tin-Plated, Nickel-Plated, Enameled |
| Copper Foil | C10100, C10200, C11000, C11300, C11400, C11600 | B370, B152 (Often follows IPC-4101) | 0.0005" - 0.010" (12µm - 250µm) | 18" - 48" (457mm - 1220mm) | Rolls: 500ft - 5000ft (150m - 1500m) | Electrodeposited (ED), Rolled & Annealed (RA), Double-Treat |
