H62 Copper Metal Rod

Henan Gnee New Material Co., Ltd. is one of the most professional manufacturers and suppliers of h62 copper metal rod in China, specialized in providing high quality copper products with competitive price. Welcome to buy discount h62 copper metal rod for sale here from our factory. Customized orders are welcome.

 

H62 brass bar and copper plate has good electrical and thermal conductivity. Its electrical conductivity is second only to silver, copper and other metals, and can be used to make wires, cables and other electrical components. Meanwhile, its thermal conductivity makes it play an important role in heat exchangers, radiators and other equipment. In addition, H62 brass is more stable in the atmosphere, fresh water and other environments, not easy to rust, but easy to produce corrosion rupture.

 

Element	Copper (Cu)	Zinc (Zn)	Lead (Pb)	Iron (Fe)	Antimony (Sb)	Bismuth (Bi)	Phosphorus (P)
Percentage	60.5 - 63.5%	Balance	≤ 0.08%	≤ 0.15%	≤ 0.005%	≤ 0.002%	≤ 0.01%

 

Property	Value
Density	8.43 g/cm³
Electrical Conductivity	27% IACS @ 20°C (Approximately)
Electrical Resistivity	0.064 µΩ·m @ 20°C
Thermal Conductivity	109 W/m·K @ 20°C
Melting Point (Liquidus)	905°C (1661°F)
Melting Point (Solidus)	900°C (1652°F)
Modulus of Elasticity	105 GPa
Poisson's Ratio	0.34
Coefficient of Thermal Expansion	20.3 µm/m°C (20°C to 300°C)

 

Temper	Tensile Strength (MPa)	Yield Strength (MPa)	Elongation (%)	Hardness (HB)
Soft Annealed (O)	300 - 360	100 - 150	40 - 55	70 - 90
Half Hard (H01)	360 - 420	200 - 280	20 - 35	100 - 130
Hard (H04)	420 - 500	300 - 380	10 - 18	130 - 160
Extra Hard (H06)	500 - 550	380 - 450	5 - 10	160 - 180

 

Specification	Details
Product Forms	Round Bars Hexagonal Bars Square Bars Flat Bars Rectangular Bars Octagonal Bars Threaded Rods Custom Profiles
Diameter / Cross-Section	Round Bars: 1 mm to 300 mm (0.04" to 12") Hex Bars: 3 mm to 100 mm (AF - Across Flats) Square Bars: 3 mm x 3 mm to 150 mm x 150 mm Flat Bars: 2 mm x 5 mm to 50 mm x 200 mm
Length	Standard: 1000 mm, 2000 mm, 2500 mm, 3000 mm, 4000 mm Precision cut-to-length: ±0.5 mm tolerance Random mill lengths (2-4 meters) available
Temper Options	Soft Annealed (O) : Maximum ductility for forming Half Hard (H01) : General purpose machining Hard (H04) : High strength, wear resistance As Drawn: Standard manufacturing condition
Surface Finish	Mill Finish: As-extruded or as-drawn Bright Drawn: Smooth, clean surface Precision Ground: Tight tolerances, fine finish Polished: Mirror or satin finish Pickled: Clean, oxide-free surface
Tolerance Grades	h6, h7, h8, h9, h10, h11 (Precision ground to h6 available)
Straightness	1.0 mm per 1000 mm standard; 0.5 mm per 1000 mm precision
Certification	Mill Test Reports (MTR) with traceable heat numbers

H62 brass rods are easy to cut processing and cold and hot pressure processing. Through turning, milling, planing and other processing methods, parts of various shapes and sizes can be produced. Its weldability is good, and it can be connected by a variety of welding methods. At the same time, H62 brass also has good surface treatment performance, can be plated, sprayed and other treatments to meet different appearance requirements.

 

Property	H62 (CuZn37)	H59 (CuZn40)	H65 (CuZn35)	H68 (CuZn32)
Copper Content	60.5-63.5%	57-60%	64-67%	67-70%
Zinc Content	Balance (≈37%)	Balance (≈40%)	Balance (≈35%)	Balance (≈32%)
Color	Yellow-gold	Reddish-yellow	Pale yellow	Golden yellow
Strength	High	Very High	Medium	Medium-Low
Ductility	Good	Fair	Good	Excellent
Machinability	Excellent	Excellent	Good	Fair
Corrosion Resistance	Good	Moderate	Good	Very Good
Cost	Medium	Low	Medium	High

 

Property	H62 Brass	T2 Copper
Composition	Cu 62%, Zn 38%	Cu 99.9%
Strength	Much Higher (up to 550 MPa)	Lower (220-280 MPa)
Hardness	Much Higher (up to 180 HB)	Lower (40-65 HB)
Conductivity	Lower (27% IACS)	Excellent (100% IACS)
Machinability	Excellent	Poor (gummy)
Corrosion Resistance	Good	Excellent
Color	Gold	Reddish-orange
Cost	Lower	Higher
Density	Lower (8.43 g/cm³)	Higher (8.94 g/cm³)

 

Application Requirement	Choose H62	Choose T2 Copper
High Strength Needed	Yes	No
Excellent Machinability	Yes	No
Decorative Gold Color	Yes	No
Maximum Conductivity	No	Yes
Corrosive Environment	Good	Excellent
Forming/Deep Drawing	Limited	Excellent
Cost Sensitivity	Lower cost	Higher cost

 

What is H62 copper metal?
A: H62 is a copper-zinc alloy (brass) containing 60.5-63.5% copper and approximately 37% zinc. It is one of the most widely used brass alloys, offering an excellent combination of strength, machinability, corrosion resistance, and attractive gold color.

 

Is H62 considered brass or copper?
A: Technically, H62 is brass (a copper alloy), not pure copper. However, it is commonly referred to as "copper metal rod" in trade contexts due to its high copper content (62%) and copper-like appearance. The correct metallurgical term is 62/40 brass or cartridge brass.

 

What is the machinability rating of H62 brass?
A: H62 has an excellent machinability rating of approximately 80-90% (compared to free-machining brass C36000 at 100%). It produces well-broken chips, allows high cutting speeds, and provides excellent surface finish.

 

Is H62 suitable for potable water applications?
A: Standard H62 contains ≤0.08% lead, which may not comply with strict potable water regulations in some regions (NSF/ANSI 61, RoHS). We offer low-lead (≤0.03%) and lead-free (≤0.01%) versions for drinking water applications.

 

We are a state-of-the-art manufacturing facility specializing in copper and brass alloy products for global industry. With over 20 years of metallurgical experience, our factory utilizes advanced continuous casting, extrusion, hot rolling, and precision drawing techniques to produce H62 Copper Metal Rods that meet the strictest international standards (GB/T 4423, ASTM B16, EN 12164). Our quality control laboratory is equipped with optical emission spectrometers, tensile testing machines, hardness testers, and precision dimensional inspection tools to verify every aspect of material quality. We source only certified raw materials and maintain strict process controls throughout manufacturing to ensure consistent chemical composition, precise dimensional accuracy, and reliable mechanical properties. From large-volume industrial orders to specialty custom profiles, we deliver brass rods you can trust.

 

We have a team of highly skilled professionals who are committed to providing high quality products and services to our customers. Our team has the following advantages over our competitors:
Technical expertise: Our team has excellent technical expertise in the production of copper products.
Experience: Our team has many years of experience in the industry and a deep understanding of the market.
Customer Oriented: We are customer oriented and prioritize our customers' needs.
Responsive: Our team is responsive and able to quickly resolve any issues that arise.
Communication: We have excellent communication skills and keep our customers informed throughout the production process.

Hot Tags: h62 copper metal rod, China h62 copper metal rod manufacturers, suppliers, factory, copper, industrial C10200 copper bars, copper round C27000 bar, copper earth rod, C21000 copper round bar, C24000 copper round bar, copper C21000 rod