What is the difference between copper C101 and C10100?
The terms C10100 and C101 both refer to the same high-purity copper alloy with a minimum purity of 99.99% copper and very low oxygen content (typically less than 0.0005%). Therefore, there is no difference in quality, performance, or suitability between the two.
What is C10100 copper?
C10100 Oxygen-Free Electronic Copper, also known as OFE, is a 99.99% pure copper with 0.0005% oxygen content. C101 achieves a minimum 101% IACS conductivity rating. This copper is finished to a final form in a carefully regulated, oxygen-free environment.
What is C101 copper material?
Copper C101 is an Oxygen Free Electronic Copper. This is a 99.99% pure copper having a 0.0005% oxygen content. This material has a minimum 101% IACS conductivity rating, and it is valued more for the chemical purity than electrical conductivity. it is finished to a final form and carefully regulated in a oxygen-free environment. The C101 Grade is one of the most expensive of the copper grades.
What are the four types of copper pipe?
Types of Copper Pipes and Their Uses
Type K: Thickest, best for underground water lines.
Type L: Versatile, used for interior plumbing and HVAC.
Type M: Thinner, best for budget-friendly indoor systems.
Type DWV: For drain, waste, and vent-not for pressure use.
What is the difference between copper C101 and C110?
Copper 101 has slightly higher conductivity (>101% IACS) compared to Copper 110 (~100% IACS). This makes it more suitable for precision electronics. Thermal Conductivity: Both grades are excellent, but C101 has marginally better thermal conductivity, ideal for heat sinks or RF enclosures.
about us
GNEE is a leading manufacturer and global supplier of high-quality, precision-engineered copper products. We specialize in providing a comprehensive range of copper solutions tailored to meet the rigorous demands of various industries worldwide, including HVAC/R, automotive, construction, electrical engineering, and industrial machinery.
Our Extensive Product Portfolio:
Copper Tubes & Pipes:
We supply a full spectrum of copper tubes, including Round Pipes, Square Pipes, Welded Pipes, Seamless Pipes, Heat Exchanger Tubes, and Condenser Tubes, designed for superior thermal conductivity and corrosion resistance.
Copper Sheets & Plates:
Our flat-rolled products range from delicate Copper Foils and Thin Sheets to heavy-duty Plates and Circles (Round Plates), ideal for fabrication, roofing, and electrical applications.
Copper Bars & Rods:
We offer Copper Bars in various profiles such as Round Bars, Square Bars, and Hexagonal Bars, providing excellent machinability and strength for precision parts.
Copper Wires & Strips:
Our product line also includes high-conductivity Copper Wires and finely manufactured Copper Strips, essential for electrical components and connectors.
All our products are manufactured to international quality standards, with a strong focus on common American grades and ASTM specifications to ensure global compatibility and performance. Our key materials include:
C11000 (Electrolytic Tough Pitch - ETP Copper)
C10200 (Oxygen-Free Copper - OFC)
C12200 (Phosphorus Deoxidized Copper, DHP)
C10100 (Oxygen-Free Electronic Copper - OFE)
C26000 (Cartridge Brass, 70/30)
C27200 (Brass, 65/35)
C44300, C68700 (Admiralty Brass)
C70600 (Copper Nickel, 90/10)
C71500 (Copper Nickel, 70/30)
These materials conform to critical standards such as ASTM B111 (Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock), ASTM B68 (Seamless Copper Tube), ASTM B75 (Seamless Copper Tube), ASTM B88 (Seamless Copper Water Tube), ASTM B152 (Copper Sheet, Plate, Strip, and Rolled Bar), ASTM B187 (Copper Bus Bar, Rod, and Shapes), and ASTM B601 (Temper Designations for Copper and Copper Alloys).
