Dec 24, 2025 Leave a message

What Is H62 Brass Material

H62 Brass Overview

H62 brass provides a high strength and plasticity balance, with tensile strength of at least 330 MPa and elongation of at least 10 percent in the hard state, and excellent cold and hot working performance. It is suitable for processes such as stamping, drawing, and forging. H62 offers high cost-effectiveness and is one of the most widely used common brasses.

Chemical Composition

The composition is copper 60.5 to 63.5 percent, zinc as remainder at approximately 36.5 to 39.5 percent, lead 0.08 percent maximum, iron 0.15 percent maximum, and total impurities 0.5 percent maximum.

Physical Properties

Density is 8.43 to 8.47 g per cubic centimeter, electrical conductivity is approximately 22 percent IACS, thermal conductivity is 115 to 120 W per meter per Kelvin, linear expansion coefficient is 20.6 times 10 to the minus 6 per degree C from 20 to 300 degrees C, and melting point is 905 to 930 degrees C.

Mechanical Properties

Tensile strength ranges from 330 to 600 MPa depending on the processing state, with elongation of at least 10 percent in the hard state and up to 45 percent in the soft state. Hardness is 80 to 110 HB, and normal annealing is performed at 550 to 650 degrees C to eliminate work hardening.

Corrosion Resistance and Processing

H62 has good corrosion resistance in freshwater and atmospheric conditions, but is prone to stress corrosion cracking in seawater or ammonia-containing environments. It supports cold rolling, hot rolling, and welding, but annealing is required after cold processing to avoid stress concentration.

Applications

H62 is used to make brass tile trims, profiles, plumbing fittings, electrical connectors, and decorative hardware of all types. In construction, it suits architectural fittings and trims because it is strong and does not corrode outside. In the electrical industry, it is used for terminals and connectors because of its good conductivity. Compared with H70, which is more ductile and easier to cold work, and H59, which is stronger but less ductile, H62 sits in the middle with a great combination of strength and workability.

Frequently Asked Questions

Q: What is the copper content of H62?

A: 60.5 to 63.5 percent.

Q: What is the tensile strength?

A: 330 to 600 MPa depending on state.

Q: Is H62 better than 360 brass?

A: H62 offers better ductility; 360 offers exceptional machinability.

Q: What is the ASTM equivalent?

A: C28000, Alloy 280 or Muntz Metal.

Q: Is H62 prone to stress corrosion?

A: Yes, in seawater or ammonia-containing environments.

Q: What is the annealing temperature?

A: 550 to 650 degrees C.

Contact us for H62 brass in strip, bar, tube, and sheet forms with certified properties.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry