Dec 29, 2025 Leave a message

Brass Alloy 260 (C26000): Properties, Fabrication, and Equivalents

What Is Brass Alloy 260?

Brass alloy 260 is the common trade name for UNS C26000, the 70/30 cartridge brass. In the ISO and EN systems the same alloy is designated CuZn30 (CW505L). It combines excellent cold-forming properties with good mechanical strength, and its outstanding deep-drawing behavior is why the family is often called deep-drawing or cartridge brass. The alloy contains 68.5 to 71.5 percent copper with the balance zinc.

Core Advantages

Deep drawing capability: the standard material for intricate drawn shapes such as cartridge cases and shells.

Versatile performance: high ductility combined with moderate strength over a wide temper range.

Corrosion resistance: reliable in indoor and mild outdoor environments; inhibited grades are needed for aggressive water.

Economic efficiency: excellent formability supports high-speed, high-volume press work with low tool wear.

Composition and Mechanical Range

Property Value
Copper 68.5 - 71.5%
Lead, max 0.07%
Iron, max 0.05%
Tensile strength (annealed to spring) 320 - 650 MPa
Elongation (annealed to spring) 3 - 62%
Machinability rating 30% of free-cutting brass

Fabrication Properties

Technique Suitability
Soldering Excellent
Brazing Excellent
Oxy-acetylene welding Good
Gas shielded arc welding Fair
Coated metal arc welding Not recommended
Resistance welding (spot and seam) Good
Cold working Excellent
Hot working Fair (725 - 850 C)
Annealing temperature 375 - 650 C
Stress-relieving temperature 250 - 300 C

Equivalent Designations

System Designation
UNS C26000
ISO CuZn30
EN CuZn30 (CW505L)
BS CZ106
JIS C2600
China (GB/T 5231) H68

Product Applications

Ammunition cartridge cases and bullet jackets; fasteners, springs, and hinges; valve components and plumbing fittings; electrical connectors, terminals, and shielding; architectural trim, jewelry, and decorative hardware; radiator cores and heat exchanger parts.

Frequently Asked Questions

Q: Why is C26000 called cartridge brass?

A: It was historically used for ammunition cartridge cases because its cold-forming properties allow severe deep drawing without cracking.

Q: How does C26000 compare with C27000?

A: C26000 has about 70 percent copper and 30 percent zinc; C27000 has about 65 percent copper and 33 to 35 percent zinc. C26000 therefore offers higher ductility, while C27000 is slightly stronger and lower in cost.

Q: Can C26000 be used in potable water systems?

A: Yes, in low-lead and lead-free variants compliant with local drinking-water regulations; the standard C26000 specification is suitable for fittings subject to those limits.

Q: Is brass 260 suitable for machining?

A: It is machinable but rated only 30 percent of free-cutting brass. For large machining volumes, specify C36000 instead.

Q: What tempers are available?

A: Soft annealed through spring (OS to H10), plus specific tempers such as H02 half-hard for formed parts needing strength.

Q: Does C26000 dezincify?

A: In aggressive or chloride-rich water, high-zinc brass can dezincify. For such service, specify inhibited brasses such as C44300 or switch to copper-nickel alloys.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry