Are UNS C70600 and Cu-Ni 90/10 the Same Material?
Yes, they generally refer to the same 90/10 copper-nickel alloy family. The difference is how the material is identified.
Cu-Ni 90/10 is the common alloy name. It describes a copper-nickel alloy with approximately 90% copper and 10% nickel.
UNS C70600 is a specific material designation in the Unified Numbering System (UNS).
90/10 Copper Nickel is another commonly used name for this alloy.
| Name or designation | What it identifies | Purchasing significance |
|---|---|---|
| Cu-Ni 90/10 | General copper-nickel alloy type | Describes the alloy family |
| 90/10 Copper Nickel | Common alternative name | Often used in product catalogs and quotations |
| UNS C70600 | Specific copper alloy designation | Provides a more precise material identification |
| ASTM B466/B466M | Seamless copper-nickel pipe and tube product standard | Defines requirements for the specified product form |
| ASTM B467 | Welded copper-nickel pipe product standard | Applies to the specified welded pipe product |
What Does Cu-Ni 90/10 Mean?
The name Cu-Ni 90/10 describes the main elements in the alloy:
Cu = Copper
Ni = Nickel
90/10 = Approximately 90% copper and 10% nickel
However, C70600 is not simply a binary copper-nickel alloy. It also contains controlled amounts of iron, manganese and other elements.
These additions are important. Iron and manganese help improve the alloy's performance in flowing seawater, which is one reason 90/10 copper nickel is widely used in marine piping and heat-exchange applications.
Typical Chemical Composition of UNS C70600
|
Element |
Composition (%) |
|---|---|
| Copper (Cu) | Balance |
| Nickel (Ni), including Co | 9.0–11.0 |
| Iron (Fe) | 1.0–1.8 |
| Manganese (Mn) | 1.0 max. |
| Lead (Pb) | 0.05 max. |
| Zinc (Zn) | 1.0 max. |
Cu-Ni 90/10 Copper Nickel Alloy Products

What Is UNS C70600?
UNS stands for Unified Numbering System, a system used to identify metals and alloys. C70600 is the designation assigned to a particular wrought copper-nickel alloy.
In purchasing documents, UNS C70600 gives a more specific material identity than the general description Cu-Ni 90/10.
It is also important not to confuse C70600 with other copper-nickel grades.
C70600 vs C71500
| Comparison | UNS C70600 | UNS C71500 |
|---|---|---|
| Common alloy name | Cu-Ni 90/10 | Cu-Ni 70/30 |
| Nickel content | 9.0–11.0% | 29.0–33.0% |
| Copper content | Balance | Balance |
| Iron content | 1.0–1.8% | 0.4–1.0% |
| Typical use | Marine piping, seawater systems, heat exchangers | Marine piping and heat exchangers requiring 70/30 alloy |
C70600 and C71500 are different alloy grades. They should not be substituted for each other simply because both are copper-nickel materials.
The higher nickel content of C71500 does not, by itself, mean it is the right choice for every seawater application. Selection should consider the system design, water conditions, flow velocity, temperature and project requirements.
What Properties Make Cu-Ni 90/10 Suitable for Marine Applications?
C70600 is widely used in marine and industrial systems because of its combination of seawater corrosion resistance, fabrication characteristics and thermal properties.
| Property | Typical applications |
|---|---|
| Seawater corrosion resistance | Seawater piping and marine equipment |
| Resistance to biofouling | Seawater intake and cooling-water systems |
| Good thermal conductivity | Condensers and heat exchangers |
| Good fabrication characteristics | Pipes, fittings and fabricated assemblies |
| Suitable mechanical properties | Marine and industrial piping components |
Common Applications
| Application | Typical service | Why C70600 is considered |
|---|---|---|
| Marine seawater piping | Seawater circulation and distribution | Seawater corrosion resistance |
| Shipboard firemain systems | Firefighting water distribution | Used in specified marine piping systems |
| Washdown systems | Seawater or other specified washdown service | Suitable alloy option for marine piping |
| Heat exchangers and condensers | Cooling water and seawater | Combines corrosion resistance with useful heat-transfer properties |
| Offshore equipment | Seawater handling and cooling circuits | Used in appropriately designed marine environments |
| Desalination systems | Seawater and process-water equipment | Used in selected heat-transfer and piping applications |
Cu-Ni 90/10 Marine Piping System

Which Standards Apply to C70600 Products?
One of the most important points in copper-nickel purchasing is that UNS C70600 identifies the alloy, but it does not define every requirement for every product form.
A C70600 tube, pipe, plate and reducer are different products. Their applicable standards and inspection requirements may also differ.
| Product form | Standard to check |
|---|---|
| Seamless copper-nickel pipe and tube | ASTM B466/B466M |
| Welded copper-nickel pipe | ASTM B467 |
| Copper-nickel condenser and heat-exchanger tubes | ASTM B111/B111M |
What Information Should You Include When Requesting a C70600 Quote?
To avoid repeated clarification and reduce quotation delays, provide the supplier with the product details and technical requirements.
| Information | Example |
|---|---|
| Material | UNS C70600 / Cu-Ni 90/10 |
| Product form | Pipe, tube, plate, bar or reducer |
| Applicable standard | ASTM or other specified standard and edition |
| Dimensions | OD, wall thickness, length or fitting dimensions |
| Manufacturing requirement | Seamless or welded, where applicable |
| Quantity | Pieces, lengths, weight or total quantity |
| Inspection documents | MTC, inspection report or other specified documents |
| Delivery requirement | Destination port and required delivery schedule |
For non-standard fittings, send the drawing with dimensions, wall thickness, end connection and manufacturing requirements. This helps the supplier assess manufacturing feasibility and quote the correct product.
FAQ
Q: Is UNS C70600 the same as Cu-Ni 90/10?
A: In common copper-nickel material terminology, yes. Cu-Ni 90/10 is the general alloy name, while UNS C70600 is its specific alloy designation. The applicable product standard still needs to be confirmed.
Q: What is the nickel content of C70600?
A: The commonly referenced UNS C70600 composition range is 9.0–11.0% nickel, including cobalt where specified by the composition convention.
Q: Is C70600 the same as C71500?
A: No. C70600 is Cu-Ni 90/10, while C71500 is Cu-Ni 70/30. They have different chemical compositions and should be specified separately.
Q: Can C70600 be used for seawater piping?
A: Yes. C70600 is widely used in marine seawater piping and heat-exchange applications. Actual suitability depends on operating conditions and the project design.
Q: Does UNS C70600 specify whether a product is seamless or welded?
A: No. C70600 identifies the alloy, not the manufacturing construction. The purchase specification must separately identify whether seamless or welded construction is required, where applicable.
We supply copper-nickel materials for marine, industrial and heat-exchange applications, including Cu-Ni 90/10 (UNS C70600) in different product forms.
When requesting a quotation, send us your required material designation, product form, dimensions, applicable standard and quantity. For custom fittings, include your technical drawing so we can review the manufacturing and inspection requirements.




