GNEE can provide the form
Plumbing Components
C23000 is commonly used in plumbing components such as faucets, valves, pipes, fittings and more. The alloy is known for its corrosion resistance and excellent machinability, making it a perfect material for plumbing applications. It can also be used in drinking water systems.
Marine Hardware
C23000 is used in marine hardware applications for boat fittings and fasteners, fishing tackle components, rudder systems, outboard engine parts, navigation instruments and deck fixtures. This copper superior corrosion resistance & high strength-to-weight ratio.
Food Service Fixtures
C23000 is often used in food service fixtures. The alloy offers excellent corrosion resistance. It's also highly machinable, allowing for the fabrication of complex shapes with close tolerances. It can be used in kitchen equipment such as ovens, fryers, grills and dishwashers.
Architectural Hardware
Used for architectural hardware applications due to its superior corrosion resistance, high strength-to-weight ratio, and excellent machinability. It is an ideal material for outdoor applications as it offers protection against weathering and environmental factors.
Products provided by GNEE
| Product Category | Standards | Available Grades | Size Range | Key Applications |
|---|---|---|---|---|
| Copper Tube/Pipe | ASTM B75, B88, B280, EN 1057 | All Grades Available: C11000, C10200, C12000, C12200, C10100, C26000, C26800, C28000, C36000, C38500, C51000, C51900, C52100, C54400, C70600, C71500, C75200, C77000, C17200, C17500, C17510 |
OD: 6mm - 159mm Wall Thickness: 0.5mm - 5mm Length: Straight 1-6m, Coils up to 50m |
Plumbing, HVACR, Heat Exchangers, Industrial Piping |
| Copper Sheet/Plate | ASTM B152, B152M, EN 1652 | All Grades Available: C11000, C10200, C12000, C12200, C10100, C26000, C26800, C28000, C36000, C38500, C51000, C51900, C52100, C54400, C70600, C71500, C75200, C77000, C17200, C17500, C17510 |
Thickness: 0.3mm - 50mm Width: 300mm - 1200mm Length: 1000mm - 3000mm |
Architecture, Electrical Components, Fabrication, Decorative |
| Copper Rod/Bar | ASTM B187, B16, B124, EN 12163 | All Grades Available: C11000, C10200, C12000, C12200, C10100, C26000, C26800, C28000, C36000, C38500, C51000, C51900, C52100, C54400, C70600, C71500, C75200, C77000, C17200, C17500, C17510 |
Diameter: 3mm - 300mm Length: 1000mm - 4000mm |
Machined Parts, Fasteners, Busbars, Structural Components |
| Copper Wire | ASTM B1, B3, B174, EN 13601 | All Grades Available: C11000, C10200, C12000, C12200, C10100, C26000, C26800, C28000, C36000, C38500, C51000, C51900, C52100, C54400, C70600, C71500, C75200, C77000, C17200, C17500, C17510 |
Diameter: 0.05mm - 12mm Form: Bare, Tinned, Stranded |
Electrical Windings, Cables, Conductors, Fasteners |
| Copper Strip | ASTM B152, B122, B103, EN 1652 | All Grades Available: C11000, C10200, C12000, C12200, C10100, C26000, C26800, C28000, C36000, C38500, C51000, C51900, C52100, C54400, C70600, C71500, C75200, C77000, C17200, C17500, C17510 |
Thickness: 0.05mm - 3.0mm Width: 10mm - 500mm |
Electronics, Connectors, Springs, Decorative Trim |
