Copper Alloy Tubes For Heat Exchangers PDF
In the heat exchanger field, while the thermal conductivity of C70600 copper rod (90-10 copper-nickel alloy) is not optimal compared to other copper materials (such as red copper and brass), its corrosion resistance and mechanical properties offer comprehensive advantages in specific scenarios. Its application in heat exchange equipment is primarily focused on areas where heat transfer efficiency and corrosive environments must be balanced.
Comparison of Thermal Conductivity of C70600 Copper Rod with Other Copper Materials
The core requirement of a heat exchanger is efficient heat transfer. Differences in thermal conductivity between different copper materials directly impact heat transfer efficiency. A detailed comparison is as follows:

Basic Differences in Thermal Conductivity
C70600 copper rod: The thermal conductivity is 140-160 W/(m・K). Due to the 10% nickel content (nickel has a lower thermal conductivity of approximately 90 W/(m・K)), it is slightly lower than pure copper and brass. Copper (T2): With a thermal conductivity of up to 390 W/(m・K), it is currently the most thermally conductive copper material and is suitable for applications requiring extremely high heat transfer efficiency.
Brass (H62): With a thermal conductivity of 110-130 W/(m・K), it is slightly lower than C70600 and contains zinc, making it susceptible to dezincification corrosion.
Conclusion: Judging solely by thermal conductivity, C70600 is inferior to copper, but superior to most brasses, making it a "medium-to-high thermal conductivity" copper material.
Comprehensive Performance of Actual Heat Transfer Efficiency
The Impact of Corrosion on Heat Transfer: In corrosive media (such as seawater and chlorinated cooling water), copper and brass are susceptible to corrosion, producing scale or pitting, which increases thermal resistance (corrosion product thermal conductivity <1 W/(m・K)). C70600's dense oxide film (Cu₂O-NiO) is not only corrosion-resistant but also thin (less than 5μm) and offers excellent thermal conductivity (approximately 30W/(m・K)). After long-term use, its heat transfer efficiency decreases by less than 5%, far lower than that of copper (10%-15%) and brass (20%-30%).
Structural Adaptability: C70600's high strength (tensile strength of 345-485MPa) allows for thinner heat exchange components (such as tube walls and fins), partially offsetting its thermal conductivity disadvantage. For example, a 1mm-thick heat exchange tube made of C70600 achieves a heat transfer efficiency close to that of a 2mm-thick copper tube and is more resistant to pressure shock.

Heat Exchange Equipment Manufacturing Suitable for C70600 Copper
Due to its "medium-to-high thermal conductivity + high corrosion resistance" characteristics, C70600 copper rod is primarily suitable for the following heat exchange equipment:
Seawater Cooling Heat Exchangers
Typical Applications: Ship main engine condensers, seawater-freshwater heat exchangers for offshore platforms, and circulating water coolers for coastal power plants.
Suitability: These devices use seawater (containing high concentrations of chloride ions) as the cooling medium. C70600's seawater corrosion resistance (annual corrosion rate <0.025mm) prevents pipe leaks. Its thermal conductivity of 140-160 W/(m·K) meets the cooling needs of ships and power plants (heat transfer efficiency is 5-8 times higher than stainless steel).
Key Components: Heat exchange tubes, tube sheets, and fins. Processed from C70600 copper rod, they withstand seawater erosion and pressure fluctuations (operating pressure 0.5-1.5 MPa).
Chemical Corrosion-Resistant Heat Exchangers
Typical Applications: Coolers for low-concentration acid and alkali solutions (such as 5% sulfuric acid and 10% sodium hydroxide solution) and condensers for chlorine-containing process media. Compatibility: Mildly corrosive chemical media can damage the surfaces of copper and brass, but C70600's nickel alloying provides superior corrosion resistance. Its thermal conductivity also meets low- to medium-range heat exchange requirements (such as reactor jacket cooling).
Advantages: Compared to titanium heat exchangers (thermal conductivity of 17 W/(m·K)), C70600 offers higher heat transfer efficiency and costs only 1/3-1/2 of titanium.
Heat Exchange Equipment in the Oil and Gas Industry
Typical Equipment: Offshore platform oil and gas coolers and crude oil-water heat exchangers.
Compatibility: Oil and gas associated water contains corrosive elements such as hydrogen sulfide and chloride ions. C70600's resistance to sulfide corrosion and pitting corrosion ensures a long equipment lifespan of 10-15 years. Its thermal conductivity also meets the heat exchange requirements for crude oil cooling (from 80°C to 40°C). Application Components: Heat exchange tube bundles and guide plates must withstand a certain pressure (2.0-3.0 MPa). The strength of C70600 prevents tube deformation.
Waste Heat Recovery Heat Exchangers
Typical Equipment: Industrial furnace flue gas waste heat recovery units (flue gas temperature <300°C) and ship exhaust gas condensers.
Suitability: Low-temperature waste heat recovery does not require extreme thermal conductivity (it does not require the ultra-high thermal conductivity of copper), but the equipment must be resistant to corrosion from trace amounts of sulfur dioxide in the flue gas. C70600's combination of corrosion resistance and medium-to-high thermal conductivity allows for effective waste heat recovery with low maintenance costs.
In summary, while C70600 copper rod's thermal conductivity isn't as good as that of red copper, it's superior to most brasses. It also maintains long-term, stable heat transfer efficiency in corrosive environments, offering superior overall performance. It's suitable for manufacturing equipment requiring both thermal conductivity and corrosion resistance, such as seawater cooling heat exchangers, chemical corrosion-resistant heat exchangers, and oil and gas industry heat exchange equipment. It's an ideal choice for balancing performance and cost.
about Us

GNEE METAL
GNEE is a leading company specializing in the export of copper tubes. We specialize in producing high-quality copper tubes for heat exchangers. Our main grades include C11000, C12200, C44300, C68700, and C70600. Our products are widely used in the refrigeration, HVAC, and power industries.
We are equipped with advanced automated equipment, including continuous casting units, precision rolling mills, and internal thread forming machines, to ensure product accuracy and consistency. We utilize testing equipment such as optical spectrum analyzers and eddy current flaw detectors to maintain strict quality control, ensuring our products meet international standards such as ASTM and JIS.
Contact us today for a quotation:sales@gneesteel.com





