| Standard: | ASTM B111 | Material: | UNS No. C70600, C10200, C10300, C10800, C12000, C12200, C14200, C19200, C23000, C28000, C44300, C44400, C44500, C60800, C61300, C61400, C68700, C70400, C70620, C71000, C71500, C71520, C71640, And C72200 |
|---|---|---|---|
| Testing: | ET, HT, Flattening Test; Expansion Test, Mercurous Nitrate Test; Ammonia Vapor Test; Chemical Analysis; Microscopical Examination; Tension Testing. | ||
Copper-Nickel Alloy tube:
1)Up to GB/T8890/ASTM B111/JIS H3300/BS EN12451 standards and so on.
2)Material designation: BFe10-1-1 / C70600 / C7060X / CuNi10Fe1Mn / CuNi9010 / Cu90Ni10 and BFe30-1-1 / C71500 / CuNi30Mn1Fe / CuNi7030 / Cu70Ni30 or other alloy
Material Brand of Copper-Nickel Alloy tube:
| Grade | USA | U.K | Germany | Japan |
| China BG | ASTM | BS | DIN | JIS H |
| BFe10-1-1 | C70600 | CN102 | CuNi10Fe1Mn | C7060 |
| BFe30-1-1 | C71500 | CN107 | CuNi30Mn1Fe | C7150 |
3)Tubes temper: All tempers are available (Goods supply state: Annealed condition)
4)Dimensions: Outer diameter:5-419mm, Wall thickness: 0.5-10mm or according to the buyers' requirements, and also length and tolerance subject to the buyer's decisions.
5) Tubes in good straightness, with clean surface of both inside and outside
6)Application range: Copper-Nickel Alloy tube for condenser and heat-exchangers, Water Evaporators, Boiler Blowdown Heat Exchangers, air coolers, Gland Steam Condensers, Steam Ejector, Turbine Oil Coolers, Fuel Oil Heaters, Compressed Air Inter and After Coolers, Ferrules, Oil Well Pump Liner, Distiller , Marine Industry , and Nuclear Power etc.
C70600 Copper Nickel "90/10"ASTM B151, MIL C15726F, SAE J461, SAE J463C70600 (C706) & C71500 (C715), Copper nickel offers excellent corrosion resistance, especially in marine salt water environments.
The main, wrought copper-nickel alloys chosen for sea water service contain 10 or 30 percent nickel. They also have important additions of iron and manganese which are necessary to maintain good corrosion resistance.
Typical Uses for C706 Copper Nickel "90/10":
AUTOMOTIVE: Power Steering Tube, Brake Lines
CONSUMER: Screw Lamp Bases
INDUSTRIAL: Condenser Plates, Condensers, Weld Torch Tips, Heat Exchanger Tubes, Valve Bodies, Evaporator Tubes, Pressure Vessels, Distiller Tubes, Pump Impellers for Oil Refining, Ferrules, Evaporators
MARINE: Boat Hulls, Tube Sheet for Salt Water Service, Salt Water Pipe Fittings, Salt Water Piping Systems, Salt Water Piling Wrap, Hot Water Tanks, Salt Water Baffles, Propeller Sleeves, Ship Hulls, Water Hoses
mechanical properties of UNS C70600 tubes as a function of heat treatment.
| Temper | Tensile Str. | Yield Str. | Elong. | Rockwell | |||
| B | C | F | 30T | ||||
| H55 | 414MPa (60ksi) | 393MPa (57ksi) | 10% | 72 | - | 100 | 70 |
| OS025 | 303MPa (44ksi) | 110MPa (16ksi) | 42% | 15 | - | 65 | 26 |
The chemical composition of UNS C70600 copper alloy is outlined in the following table.
| Elements | Content (%) |
| Nickel, Ni | 9.0-11.0 |
| Iron, Fe | 1.0-1.8 |
| Zinc, Zn | 1.0 |
| Manganese, Mn | 1.0 |
| Lead, Pb | 0.05 |
| Copper, Cu | Remainder |
Equivalent materials to UNS C70600 copper alloy are given in the table below.
| ASME SB111 | ASME SB171 | ASME SB359 | ASME SB466 | ASME SB467 |
| ASME SB395 | ASME SB543 | ASTM B111 | ASTM B151 | ASTM B122 |
| ASTM B171 | ASTM B359 | ASTM B395 | ASTM B432 | ASTM B466 |
| ASTM B469 | ASTM B543 | ASTM B608 | DIN 2.0872 | MIL C-15726 |
| MIL T-15005 | MIL T-16420 | MIL T-22214 | SAE J461 | SAE J463 |
Copper products that GNEE can provide
|
High quality 99.9% pure copper pipe / straight copper tube / copper alloy pipe |
|||
|
Standard |
ASTM,DIN,BS,CDA,JIS,GB |
||
|
Material |
T1,T2,C10100,C10200,C10300,C10400,C10500,C10700,C10800, |
||
|
Shape |
Round,Square,Rectangular,etc. |
||
|
Specifications |
Round:wall thickness:0.2mm~120mm,outside diameter:2mm~910mm
Square:wall thickness:0.2mm~120mm,size:2mm*2mm~1016mm*1016mm Rectangularwall thickness:0.2mm~120mm,size:2mm*4mm~1016mm*1219mm |
||
|
Length |
3m,5.8m, 6m, 11.8m, 12m, or as required. |
||
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etc |
||
|
Surface |
mill,polished,bright,oiled,hair line,brush,mirror,sand blast,or as required. |
||
|
Price term |
EXW, FOB, CFR, CIF, etc. |
||
|
Payment term |
T/T |
||
|
Package |
Export standard package: bundled wooden box, suit for all kinds of transport, |
||
|
Delivery time |
According to order quantity |
||
|
Export to |
Singapore,Indonesia,Ukraine,Korea,Thailand, Vietnam, Saudi Arabia, Brazil, Spain, |
||
|
Application |
Copper pipe is the first choice of residential housing water pipes, heating, cooling pipes |
||
|
Straight copper rod/copper round bar |
|||
|
Standard |
ASTM,DIN,BS,CDA,JIS,GB |
||
|
Material |
T1,T2,C10100,C10200,C10300,C10400,C10500,C10700,C10800, |
||
|
Shape |
Round,Square,Rectangular,etc. |
||
|
Specifications |
Diameter:3~200mm |
||
|
Length |
3m,5.8m, 6m, 11.8m, 12m, or as required. |
||
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etc |
||
|
Surface |
mill,polished,bright,oiled,hair line,brush,mirror,sand blast,or as required. |
||
|
Price term |
EXW, FOB, CFR, CIF, etc. |
||
|
Payment term |
T/T |
||
|
Package |
Export standard package: bundled wooden box, suit for all kinds of transport, |
||
|
Delivery time |
According to order quantity |
||
|
Export to |
Singapore,Indonesia,Ukraine,Korea,Thailand, Vietnam, Saudi Arabia, Brazil, Spain, |
||
|
Application |
A copper rod is a type of colored metal processing bar stock with high electrical conductivity. It is mainly divided into brass |
||
|
Size |
Width: 10mm to 2000mm, |
||
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard. |
||
|
Surface |
Polished,bright,oiled,hair line,brush,mirror,or as required |
||
|
Package |
Plastic film with Wooden case or wooden pallet |
||
|
Delivery time |
Prompt delivery or upon your order quantity. |
||
|
Quality Control |
Mill Test Certification is supplied with shipment,Third Part Inspection is acceptable. |
||
|
Application |
widely used inair conditioners,refrigerators,electric,solar water heater, polished pipe an be used in decorative,such as stair |
||
|
Shape |
Round, Square, Oval, can be customized |
||
|
Item |
Copper Wire |
||
|
Standard |
ASTM,DIN,BS,CDA,JIS,GB |
||
|
Material |
T1,T2,C10100,C10200,C10300,C10400,C10500,C10700,C10800, |
||
|
Shape |
Round |
||
|
Specifications |
As required. |
||
|
Length |
As required. |
||
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etc |
||
|
Surface |
mill,polished,bright,oiled,hair line,brush,mirror,sand blast,or as required. |
||
|
Price term |
EXW, FOB, CFR, CIF, etc. |
||
|
Payment term |
T/T |
||
|
Package |
Export standard package: bundled wooden box, suit for all kinds of transport, |
||
|
Delivery time |
According to order quantity |
||
|
Application |
Copper wire, as a conductive material, is widely used in power transmission and electronic devices. Transformers, inductors, |
||
Copper CNC machined parts
|
Custom CNC Machining Parts of Most Materials
|
||||
|
Quotation
|
According to your drawing(size, material, thickness, processing content, and required technology, etc)
|
|||
|
Materials Avaiable
|
Brass,Stainless Steel,Q235&Q345 steel, Zinc-plate Sheet,Stainless Steel, Aluminum,Copper, etc.
|
|||
|
Surface Treatment
|
Zinc Plating, chrome plate, powder coating, anodizing, wire drawing, silk-screen printing, etc
|
|||
|
Processing
|
Laser Cutting, Precision Stamping, CNC Bending, CNC Milling, CNC Turning, Threading, Riveting, Drilling, CNC Punching,Die Casting, Laser Welding, etc.
|
|||
|
Testing Equipment
|
CMM/Tool microscope/multi-joint arm/Automatic height gauge/Manual height gauge/Dial gauge/Roughness measurement
|
|||
|
Drawing Formats
|
PRO/E, Auto CAD, Solid Works , UG, CAD / CAM / CAE, PDF
|
|||
|
Our Advantages
|
1.) 24 hours online service & Quickly Quote/Delivery.
2.) 100% QC quality inspection before delivery, and can provide quality inspection form.
3.) 18+ years of experience in the CNC machining area and have a senior design team to offer perfect modification suggestions. |
|||
|
Tolerance丨Surface Roughness
|
Generally +/-0.1-0.2mm
|
|||
|
Sample service
|
Avaliable before bulk order. Samples charge according your design, The sample fee can be used as the payment for mass goods.
|
|||
About Us
Founded in 2008, we specialize in exporting premium copper products. Our manufacturing leverages continuous casting lines and precision drawing machines. Rigorous quality control, including eddy current testing and spectrometer analysis, guarantees the superior performance of our copper tubes and coils for global applications.
If you need any help, please contact us immediately!
Email address：sales@gneemetal.com
Square Meters Built
Enterprise Employees
Cooperating Partner
Years Experience
