What Is Cartridge Brass C26000
UNS C26000, known as cartridge brass or 70/30 brass, is a copper-zinc alloy containing approximately 70 percent copper and 30 percent zinc. It is renowned for its excellent ductility, machinability, and corrosion resistance. The alloy became the standard material for ammunition casings and is today widely used in plumbing, architectural hardware, electrical components, and automotive parts.
Chemical Composition
| Element | Minimum | Maximum |
|---|---|---|
| Copper | 68.5 percent | 71.5 percent |
| Iron | - | 0.05 percent |
| Lead | - | 0.07 percent |
| Zinc | 28.5 percent | 31.5 percent |
| Residuals | - | 0.15 percent |
Physical Properties
| Property | Value |
|---|---|
| Density | 8530 kg/m3 |
| Melting point | 915-955 C |
| Thermal conductivity | 120 W/m.K |
| Specific heat capacity | 390 J/kg.K |
| Coefficient of thermal expansion | 2.0 x 10-5 /C |
| Electrical conductivity | 1.6 x 107 S/m, about 28 percent IACS |
Mechanical Properties
Mechanical values span a wide range with temper. Ultimate tensile strength ranges from about 300 MPa annealed to 890 MPa in the hardest spring tempers, with yield strength from 70 to 450 MPa and elongation up to 66 percent in the annealed condition. Young's modulus is 110 GPa and shear modulus 40 GPa, with a Poisson's ratio of 0.34. The alloy work hardens rapidly, which is the basis for the deep drawing process used to form cartridge cases.
Applications
Ammunition casings, which require strength, ductility, and corrosion resistance under firing pressure.
Plumbing fittings, valves, couplings, and connectors in residential and commercial systems.
Architectural hardware: door handles, hinges, knobs, and decorative accents.
Electrical connectors, terminals, and contact elements.
Automotive radiator cores, fuel tanks, heat exchangers, and connectors.
Marine fittings and components exposed to saltwater.
Fabrication Notes
C26000 is one of the most formable brasses: it deep draws, stamps, spins, and bends readily, and it machines well with standard tooling. It is joined by silver brazing, soft soldering, and, with care, TIG welding under adequate ventilation because of the small lead content.
Governing Standards
C26000 flat products are covered by ASTM B36 and rod and bar by ASTM B16 where applicable; the EN equivalent is CuZn30 per EN 1652 and EN 12163. GB/T 5231 covers the corresponding Chinese designation H70.
Frequently Asked Questions
Q: Why is C26000 called cartridge brass?
A: It was developed for ammunition cartridge cases because of its excellent deep drawing behavior and strength.
Q: What is the composition of C26000?
A: Copper 68.5 to 71.5 percent, lead 0.07 percent max, iron 0.05 percent max, with zinc as the balance.
Q: What is the tensile strength of C26000?
A: From about 300 MPa annealed to 890 MPa in hard spring tempers.
Q: Does C26000 resist corrosion?
A: Yes, it resists atmospheric and fresh water corrosion and performs well in marine fittings.
Q: What is the density of C26000?
A: 8530 kg/m3, or 8.53 g/cm3.
Q: What are the main uses?
A: Ammunition, plumbing fittings, architectural hardware, electrical connectors, automotive components, and marine hardware.




