As the most widely used copper-nickel alloy in marine engineering, C70600 (90/10 white copper) has become the standard material for seawater systems due to its excellent cost-performance ratio.
Material Positioning
C70600 (UNS number) corresponds to the Chinese grade BFe10-1-1 (GB/T 5231). It contains approximately 10% nickel and achieves optimized performance through iron and manganese microalloying, achieving a perfect balance between seawater corrosion protection and cost control.
Detailed Technical Parameters
1. Chemical Composition (ASTM B111 Standard)
- Cu (Copper): Balance
- Ni + Co (Nickel + Cobalt): 9.0-11.0%
- Fe (Iron): 1.0-1.8%
- Mn (Manganese): 0.5-1.0%
- Total Impurities: ≤0.5%
2. Core Physical Properties
- Density: 8.94 g/cm³
- Coefficient of Thermal Expansion: 16.2 × 10⁻⁶/°C (20-300°C)
- Electrical Conductivity: 9% IACS (better than C71500)
- Thermal Conductivity: 50 W/(m·K) (heat transfer efficiency is three times that of 304 stainless steel)
3. Typical Mechanical Properties
- Annealed:
- Tensile Strength: ≥275 MPa
- Yield Strength: ≥100 MPa
- Elongation: ≥35%
- Hardened (H80):
- Tensile Strength: ≥585 MPa
- Hardness: HRB 65-85
4. Corrosion Performance Highlights
- Seawater Corrosion Rate: <0.04 mm/year (flowing seawater at room temperature)
- Critical Flow Velocity: 2.5-3 m/s (no erosion corrosion)
- Stress Corrosion Resistance Threshold: >200°C (better than ordinary brass)
- Anti-Biofouling: Continuous release of copper ions inhibits barnacle growth




Processing and Applications
1. Key Manufacturing Process
- Hot Working Temperature: 750-900°C (avoid the brittle zone below 600°C)
- Cold Working Rate: Hardened up to 50%, requiring intermediate annealing (600-750°C)
- Welding Process:
- TIG Welding: ERCuNi wire + 75% Ar + 25% He shielding gas
- Brazing: AWS BCuP series brazing filler metal (melting point 650-800°C)
2. Main Application Scenarios
- Shipbuilding: Seawater pipelines, condenser tube sheets
- Desalination: Multi-effect evaporator heat transfer tubes (accounting for 60% of global installed capacity)
- Coastal Buildings: Fire sprinkler systems, curtain wall support structures
- Power Industry: Condensers in coastal power plants, transformer cooling tubes
3. Economic Advantages
- Material cost 30-40% lower than C71500
- Service life: Over 30 years in coastal environments (5-8 times that of carbon steel)
- Lifecycle cost: 50% lower than 316L stainless steel (including maintenance costs)
Project Selection Guide
1. Recommended Application Scenarios
- Flowing seawater systems with temperatures <80°C
- Marine environments with sand content <50 ppm
- Heat exchange equipment requiring both thermal conductivity and corrosion resistance
2. Use with caution in operating conditions
- Static seawater (prone to localized corrosion)
- Ammonia-contaminated environments (prone to stress corrosion cracking)
- Oil and gas fields with hydrogen sulfide concentrations > 10 ppm
3. Corrosion Enhancement Solutions
- Install silicone shock-absorbing sleeves for flow rates > 3 m/s
- Use cathodic protection (protection potential -0.3 to -0.5 V)
- Surface shot peening to improve cavitation resistance
why choose us

Professional copper pipe supplier
As a professional enterprise dedicated to global copper product, GNEE Metal deeply recognizes the quality and responsibility embodied in the ASTM B111 standard. This standard not only specifies chemical composition and mechanical properties but also represents a comprehensive quality commitment spanning manufacturing processes to testing and verification. GNEE solemnly assures global customers that every ASTM B111-standard condenser tube and copper alloy tubing we supply will strictly adhere to its requirements for seamless manufacturing, annealing treatment, eddy current testing, and various mechanical performance tests.
Contact us today for a quotation:sales@gneesteel.com




