C44400 Naval Brass: Alloy Overview
C44400 is a wrought antimonial naval brass, a copper-zinc alloy that carries tin for strength and a small, deliberately controlled antimony addition that suppresses dezincification. It sits in the same marine family as the tin-bearing naval brasses, but its inhibited chemistry keeps the beta phase stable in moving seawater, which is exactly where uninhibited high-zinc brasses fail. The alloy is normally supplied as rod, bar and seamless tube, and it is selected whenever a component has to combine moderate strength, good machinability and dependable resistance to salt water and marine atmospheres.
Brasses of this group have been the default material for shipboard hardware for more than a century. The reason is practical rather than traditional: the alloy resists both general corrosion and the selective attack that turns a common brass fitting into a porous, weak shell. Parts machined from C44400 hold their dimensions in service, which matters for shafts, sleeves and bearing cages that must not seize or gall.
Nominal Composition
The table below gives nominal values for the wrought alloy in weight percent; zinc forms the balance. Composition is the first thing to agree on with a supplier, because a low copper or low tin charge will machine well but will not survive continuous seawater exposure.
| Element | Nominal content (wt %) | Function |
|---|---|---|
| Copper | 70.0 - 73.0 | Base metal; sets corrosion potential and ductility |
| Tin | 0.9 - 1.2 | Raises strength and stabilises the protective surface film |
| Antimony | 0.02 - 0.10 | Inhibitor that suppresses dezincification |
| Lead | 0.07 max | Residual; aids chip breaking at low levels |
| Iron | 0.06 max | Residual; kept low to protect ductility |
| Zinc | Balance | Strengthening phase former |
Standard Designations and Product Forms
C44400 is a UNS designation, so it appears inside general copper-alloy product standards rather than in a dedicated specification of its own. The table below links the common mill forms to the standards that govern their delivery condition, dimensions and tolerances.
| Product form | Typical designation | What it covers |
|---|---|---|
| Seamless condenser and heat exchanger tube | ASTM B111/B111M | Tube for condensers, evaporators and heat exchangers |
| Plate and sheet for pressure service | ASTM B171/B171M | Copper-alloy plate and sheet for pressure vessels |
| Rod, bar and shapes | ASTM B21/B21M | Naval brass rod, bar and shapes for machining |
When an order is placed, three variables travel together: the UNS number, the mill form, and the temper. A soft annealed tube and a hard drawn tube of the same C44400 heat behave very differently in a tube expander, so the temper is not a detail to leave open. Mechanical property minima such as tensile and yield strength should always be read from the current edition of the relevant product standard instead of from generic alloy summaries.
Behaviour in Seawater
The service record of naval brass rests on two mechanisms. The first is the tin addition, which raises strength and helps the alloy build a stable, copper-rich surface film in aerated water. The second is the inhibitor: antimony in C44400 performs the same duty that arsenic performs in the aluminium brasses, blocking the zinc-selective dissolution that would otherwise hollow out the metal.
Resistance to flowing seawater and to moderate impingement attack is good for a brass, provided the alloy is protected by a sound film.
Performance depends strongly on water chemistry; stagnant, polluted or low-oxygen water is a harder environment than clean, moving seawater.
Velocity limits apply. Above the range for which the grade was selected, film breakdown and erosion-corrosion begin at fittings and tube inlets.
Where the risk profile is dominated by ammonia or by high sulfide content, a different copper alloy family should be evaluated instead.
Fabrication and Machining Notes
Naval brass is a free-cutting alloy by copper-alloy standards. It machines with short chips and a good surface finish, which is why so much of the grade disappears into turned parts. Hot working behaviour is favourable and the alloy can be forged or extruded over a normal copper-alloy working range. Cold forming is more limited because the beta phase reduces room-temperature ductility, so tight-bend operations are usually approached with an intermediate anneal.
Joining follows the usual copper-alloy practice. Soldering and brazing are straightforward with suitable fluxes, and the alloy can be welded by the common arc processes, although welding is rarely the first choice for a strength-critical marine part. Stress relief after heavy machining is worth considering for thin-walled components that must stay round.
Typical Applications
Wear-resistant and corrosion-resistant machine parts: axle tiles, bushings, thrust washers and cylinder liners.
Worm wheels and gear blanks that need strength with a low friction coefficient.
Marine hardware and deck fittings exposed to salt spray and to wash-down cycles.
Seawater pipework components, valve trim and pump parts in moderate-velocity circuits.
Electrical connectors, contacts and current-carrying parts where sparking must be avoided.
The common thread in these applications is a part that must hold its geometry while sitting between water, load and motion. C44400 answers all three requirements at a cost that keeps it competitive against more specialised marine bronzes.
FAQ
Q: What is C44400 naval brass?
C44400 is a wrought copper-zinc alloy with tin and a controlled antimony addition. The inhibitor makes it resistant to dezincification, which is what allows the grade to be used in seawater and marine atmosphere service.
Q: How does C44400 differ from a plain high-zinc brass?
A plain brass relies only on its zinc content for strength and has no inhibitor. C44400 adds tin for strength plus antimony to block selective zinc loss, so it keeps far more of its cross-section after long exposure to seawater.
Q: Which standards apply to C44400 products?
Seamless tube is generally ordered to ASTM B111/B111M, plate and sheet for pressure service to ASTM B171/B171M, and rod, bar and shapes to ASTM B21/B21M. The exact edition should be agreed on the purchase order.
Q: Can C44400 be welded and brazed?
Yes. Brazing and soldering are routine with appropriate fluxes, and the common arc welding processes can be used. Heavy welding is avoided on strength-critical marine parts, and stress relief is advisable after machining thin-walled items.
Q: Is C44400 suitable for alcohol or fuel contact?
Copper alloys in this family are not the first choice for methanol, ammonia or sulfide-bearing streams. Those services call for an alloy selected specifically for the medium and for the operating temperature.
Q: What temper should be specified for machined parts?
Matching the temper to the process is essential. Hot-formed parts normally use the as-extruded or as-forged condition, while machined components are usually ordered in a drawn temper that gives a predictable finish and chip form.




