Nov 19, 2025 Leave a message

UNS-C44300-Admiralty-Brass-Tube.pdf

C44300 Admiralty Brass Tube for Oil and Gas systems

UNS C44300 Admiralty Brass Tube PDF

 

Products Description

C44300 Admiralty Brass Tube & Pipe is made from Copper alloyed with Tin and Zinc. It is sometimes referred to as Arsenical Brass. C44300 Admiralty Brass Tube is primarily used in water heaters, heat exchanger applications and other similar equipment. C44300 Admiralty Brass Tube has good corrosion resistance, excellent heat transfer properties and is also used in Steam Condensers cooled with salt water, fresh water, or brackish water. C443000 Admiralty Brass Tube has additional applications in Oil and Gas systems as well where corrosion resistance is a key attribute. Other applications include Evaporator Tube, Distiller Tube, and Bourdon Tube.

 

Common Product Forms & Dimensions

Form

Thickness/Dia. (mm)

Width/Length (mm)

Special Requirements

Tube

Wall: 0.5–10.0

OD: 6–300

Seamless/Welded condenser tubes

Bar

Φ3–200

Cut-to-length: 0.5–6m

Hex/Square bars available

Strip

0.08–2.5

Coil width: 10–600

Slitting tolerance ±0.1mm

Plate

0.5–80

1000–6000 (L) ×500–3000 (W)

Max. single plate: 5 tons

C44300 tube
ASTM B111 C44300
C44300 copper
C44300 brass pipe

Mechanical Properties Of Admiralty Brass Seamless Pipes For Coolers

Standard ASTM B 111 BS 2871 PART3 DIN 1785 JIS H3300 NFA 51 102 IS 1545
Symbol C 44300 CZ 111 CuZn28Sn1 C 4430 CuZn29Sn1 CuZn29Sn1As
Sn 0.9-1.2 1.0-1.5 0.9-1.3 0.9-1.2 0.9-1.2 1.0-1.5
Cu 70.0-73.0 70.0-73.0 70.0-72.5 70.0-73.0 70.0-73.0 70.0-73.0
Pb 0.07 0.07 0.07 0.07 0.07 0.07
As 0.02-0.06 0.02-0.06 0.02-0.035 0.02-0.06 0.02-0.06 0.02-0.06
Fe 0.06 0.06 0.07 0.06 0.06 0.06
Ni – – 0.1 – – –
Zn REM'DER REM'DER REM'DER REM'DER REM'DER REM'DER
P – – 0.01 – – –
Total Impurities Max.       –    
  – 0.03 0.1 – 0.3 0.3
Elng'Tion Percent (%) Minimum – – 45Min. -. – –
  – – 55Min. 30 Min. – –
Condition 61 M F36 – – O
  – TA F32 O – TA
  – O – – – D
Tensile N/MM2 Minimum 310 – 360 – – 375 Mpa Max.
  – – 320 314Min. – 340 Mpa Min.
  – – – – – 385 Mpa Min.
Yield Strength N/MM2 – – 140-220 – – –
  105 – 100-170 – – –
Grain Size mm (75X) 0.010-0.045 0.05Max. – 0.010-0.045 0.010-0.045 0.010-0.04
Hardness HV5 – – 150Min – – – 80 Max.
  – 85-105 – – 80-120 80-105
  – 75Max. – – – 130 Min.

 

Admiralty Brass Condenser Tubes Composition

Chemical Composition
Elements Composition, %
Cu, incl. Ag 70.0-73.0
Sn 0.9-1.2
Al –
Ni, incl. Co  
Pb 0.06 max
Fe 0.07 max
Zn Balance
Mn –
As 0.02-0.06
Sb –
P –
Cr –
Other named elements –

 

Mechanical Testing Such as Tensile of Area:

Hardness Test

Chemical Analysis – Spectro Analysis

Positive Material Identification – PMI Testing

Flattening Test

Micro and MacroTest

Pitting Resistance Test

Flaring Test

Intergranular Corrosion (IGC) Test

 

Our inventory is in stock

C44300 copper tube C44300 condenser tube Marine grade copper tube
C44300 brass tube Copper alloy C44300 tube C44300 brass pipe supplier
Admiralty brass C44300  tube C44300 heat exchanger tube ASTM B111 C44300
C44300 seamless tube UNS C44300 tube C44300 welded tube
Arsenical brass tube C44300 C44300 copper pipe C44300 brass hollow bar

 

about us

Our Product Portfolio

We supply an extensive inventory of copper products in various forms, grades, and tempers to meet your exact specifications.

1. Copper & Copper Alloy Tubes/Pipes

Type: Copper Seamless Tube, Copper Welded Tube, Capillary Tube, Refrigeration Tube, Heat Exchanger Tube, Condenser Tube, Dehydrated Tube.

Key Alloys: C10200 (OFHC Copper), C11000 (ETP Copper), C12200 (DHP Copper), C44300, C68700, C70600 (Copper Nickel 90/10), C71500 (Copper Nickel 70/30).

 

2. Copper & Copper Alloy Sheets/Plates

Type: Copper Sheet, Copper Plate, Copper Foil, Copper Thin Sheet, Copper Thick Plate, Embossed Sheet, Perforated Sheet.

Key Alloys: C10200, C11000, C17200 (Beryllium Copper), C26000 (Cartridge Brass), C26800, C28000 (Muntz Metal).

 

3. Copper & Copper Alloy Bars/Rods

Type: Copper Round Bar, Copper Square Bar, Copper Hexagonal Bar, Copper Flat Bar, Copper Wire Rod.

Key Alloys: C10100, C11000, C36000 (Free-Cutting Brass), C38500 (Architectural Bronze).

 

4. Copper & Copper Alloy Strips/Wires

Type: Copper Strip, Copper Coil, Copper Flat Wire, Copper Bare Wire, Copper Braided Wire, Copper Tin-Plated Wire.

Key Alloys: C11000, C26000 (Brass Strip), C51900 (Phosphor Bronze), C52100, C70400.

 

Quality & Standards

We guarantee that all our products comply with international and national standards, ensuring performance, reliability, and safety.

International Standards: ASTM, EN, DIN, JIS, ISO.

Common Standards: ASTM B111,ASTM B68, B75, B88, B96, B152, B187, B465.

 

Why Choose Us?

One-Stop Shop: A comprehensive range of copper products simplifies your sourcing.

Quality Assured: Rigorous inspection and material traceability.

Global Logistics: Efficient and reliable shipping to destinations worldwide.

Technical Support: Expert assistance with material selection and specification.

C44300 brass pipe C44300 copper

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry