Dec 29, 2025 Leave a message

C26000 brass material properties

Specification

End Product Specification
Bar ASTM B36, B19, SAE J463, J461
Brazing Filler Metal FEDERAL QQ-B-650
Cups, Cartridge Case ASTM B129, MILITARY MIL-C-10375,
Disk ASTM B19
Plate AMS 4507, 4505, ASTM B19, B36
Rod SAE J463, J461
Sheet AMS 4507, 5408, 4505, ASTM B19, B36, SAE J463, J461
Shim Stock, Laminated MILITARY MIL-S-22499
Strip AMS 4507, 4505, ASTM B36, B569, B19, B888, SAE J463, J461
Tube, Seamless ASTM B135, FEDERAL WW-T-791, MILITARY MIL-T-20219, SAE J463, J461
Tube, Welded ASTM B587, B587
Wire ASTM B134, SAE J463, J461

 

Chemical Composition

Cu Fe Pb Zn
Min./Max. 68.5-71.5 0.05 0.07 Rem.
Nominal 70 - - 30

 

Machanical Properties

Temper Sect. Size Cold Work Type Min Temp Tensile Strength YS
0.05% UL
YS
0.02% Offset
YS
0.005% Offset
Elong. RH
B
RH
C
RH
F
RH
30T
VH
500
BH
500
BH
3000
Shear
Strgth
Fatigue
Strgth
Izod
Impact
Strgth
- in. % - F ksi ksi ksi ksi % B C F 30T 500 500 3000 ksi ksi ft-lb
- mm. - - C MPa MPa MPa MPa - - - - - - - - MPa MPa J
FLAT PRODUCTS
OS015 0.04     68 53 22 - - - - - - - - - - 35 14  
OS015 1 0 TYP 20 365 152 - - 54 - - 78 43 - - - 241 97 0
H02 0.04     68 62 52 - - - - - - - - - - 40 18  
H02 1 0 TYP 20 427 359 - - 25 70 - - 65 - - - 276 124 0
H06 0.04     68 86 65 - - - - - - - - - - 46 -  
H06 1 0 TYP 20 593 448 - - 5 88 - - 76 - - - 317 - 0
OS100 0.04     68 44 11 - - - - - - - - - - - 2  
OS100 1 0 TYP 20 303 76 - - 66 - - 54 11 - - - - 13 0
OS035 0.04     68 49 17 - - - - - - - - - - 34 14  
OS035 1 0 TYP 20 338 117 - - 57 - - 68 31 - - - 234 97 0
H04 0.04     68 76 63 - - - - - - - - - - 44 21  
H04 1 0 TYP 20 524 434 - - 8 82 - - 73 - - - 303 145 0
H08 0.04     68 94 65 - - - - - - - - - - 48 23  
H08 1 0 TYP 20 648 448 - - 3 91 - - 77 - - - 331 159 0
OS070 0.04     68 46 14 - - - - - - - - - - 32 13  
OS070 1 0 TYP 20 317 97 - - 65 - - 58 15 - - - 221 90 0
OS050 0.04     68 47 15 - - - - - - - - - - - -  
OS050 1 0 TYP 20 324 103 - - 62 - - 64 26 - - - - - 0
H10 0.04     68 99 65 - - - - - - - - - - - -  
H10 1 0 TYP 20 683 448 - - 3 93 - - 78 - - - - - 0
H01 0.04     68 54 40 - - - - - - - - - - 36 -  
H01 1 0 TYP 20 372 276 - - 43 55 - - 54 - - - 248 - 0
ROD
H02 1     68 70 52 - - - - - - - - - - 42 22  
H02 25.4 20 TYP 20 483 359 - - 30 80 - - - - - - 290 152 0
OS050 1     68 48 16 - - - - - - - - - - 34 -  
OS050 25.4 0 TYP 20 331 110 - - 65 - - 65 - - - - 234 - 0
H00 1     68 55 40 - - - - - - - - - - 36 -  
H00 25.4 6 TYP 20 379 276 - - 48 60 - - - - - - 248 - 0
TUBE
H80 0     68 78 64 - - - - - - - - - - - -  
H80 0 35 TYP 20 538 441 - - 8 82 - - 73 - - - - - 0
OS025 0     68 52 20 - - - - - - - - - - - -  
OS025 0 0 TYP 20 359 138 - - 55 - - 75 40 - - - - - 0
OS050 0     68 47 15 - - - - - - - - - - - -  
OS050 0 0 TYP 20 324 103 - - 65 - - 64 26 - - - - - 0
WIRE
OS035 0.08     68 50 - - - - - - - - - - - 34 -  
OS035 2 0 TYP 20 345 - - - 60 - - - - - - - 234 - 0
H08 0.08     68 130 - - - - - - - - - - - 60 22  
H08 2 0 TYP 20 896 - - - 3 - - - - - - - 414 152 0
OS025 0.08     68 52 - - - - - - - - - - - - -  
OS025 2 0 TYP 20 359 - - - 58 - - - - - - - - - 0
OS015 0.08     68 54 - - - - - - - - - - - - -  
OS015 2 0 TYP 20 372 - - - 56 - - - - - - - - - 0
OS050 0.08     68 48 - - - - - - - - - - - - -  
OS050 2 0 TYP 20 331 - - - 64 - - - - - - - - - 0
H00 0.08     68 58 - - - - - - - - - - - 38 -  
H00 2 0 TYP 20 400 - - - 35 - - - - - - - 262 - 0
H01 0.08     68 70 - - - - - - - - - - - - -  
H01 2 0 TYP 20 483 - - - 20 - - - - - - - - - 0
H06 0.08     68 124 - - - - - - - - - - - - -  
H06 2 0 TYP 20 855 - - - 4 - - - - - - - - - 0

 

Brass strip coil
Brass sheet coil
Brass roll
Brass coil stock

Physical Properties

Product Property US Customary Metric
Coefficient of Thermal Expansion 11.1 · 10-6 per oF (68-572 ÌÎ?̴åÁF) 20.0 · 10-6 per oC (20-300 C)
Density 0.308 lb/in3 @ 68 F 8.53 gm/cm3 @ 20 C
Electrical Conductivity 28 %IACS @ 68 F 0.164 MegaSiemens/cm @ 20 C
Electrical Resistivity 37.0 ohms-cmil/ft @ 68 F 6.15 microhm-cm @ 20 C
Melting Point Liquid US 1750 F 954 C
Melting Point Solid US 1680 F 916 C
Modulas of Elasticity in Tension 16000 ksi 110000 MPa
Modulas of Rigidity 6000 ksi 41370 MPa
Specific Gravity 8.53 8.53
Specific Heat Capacity 0.09 Btu/lb/oF @ 68 F 377.1 J/kg · oK at 293 K
Thermal Conductivity 70.0 Btu · ft/(hr · ft2 · oF) @ 68 F 121.2 W/m · oK at 20 C

 

Temper

Product Type Temper Type
BAR, ROLLED H02, OS070, OS100
SHEET H01, H02, OS035, OS050, OS070
STRIP, ROLLED H01, H02, H04, H06, H08, H10, OS015, OS025, OS035, OS050, OS070, OS100
WIRE, DRAWN H02, OS050
WIRE, ROLLED H02, H04, H06, OS035, OS050, OS070, OS100
SHAPES M30
TUBE H58, H80, OS025, OS050
WIRE H00, H01, H06, H08, OS015, OS025, OS035, OS050

 

Fabrication

Joining Technique Suitability
Brazing Excellent
Butt Weld Good
Capacity for Being Cold Worked Excellent
Capacity for Being Hot Formed Fair
Coated Metal Arc Welding Not Recommended
Gas Sheilded Arc Welding Good
Machinability rating 30
Oxyacetylene Welding Good
Seam Weld Not Recommended
Soldering Excellent
Spot Weld Fair

 

Brass Cartridge Product Available

C26000 rod CDA 260 annealed bars
C26000 flat bar CDA 260 cold finished round bars
C26000 hex bar CDA 260 forged round bars
C26000 square bar CDA 260 hot rolled bars
C26000 rectangular bar CDA 260 Round Bar
C26000 shaft CDA 260 Wire
C26000 billet CDA 260 Sheet
C26000 polished bar CDA 260 Plate
C26000 cold drawn bars CDA 260 Strips
C26000 annealed bars CDA 260 Foil
C26000 cold finished round bars CDA 260 Shims
C26000 forged round bars CDA 260 Coil
C26000 hot rolled bars CDA 260 Pipe
C26000 Round Bar CDA 260 Tubes
C26000 Wire CDA 260
C26000 Sheet rod
C26000 Plate flat bar
C26000 Strips hex bar
C26000 Foil square bar
C26000 Shims rectangular bar
C26000 Coil shaft
C26000 Pipe billet
C26000 Tubes polished bar
C26000 cold drawn bars
CDA 260 rod annealed bars
CDA 260 flat bar cold finished round bars
CDA 260 hex bar forged round bars
CDA 260 square bar hot rolled bars
CDA 260 rectangular bar Round Bar
CDA 260 shaft Wire
CDA 260 billet Sheet
CDA 260 polished bar Plate
CDA 260 cold drawn bars Strips
Coil Foil
Pipe Shims
Tubes  
CDA 230 hex bar  
CDA 230 square bar  
CDA 230 rectangular bar  
CDA 230 Shims  
CDA 230 Coil  
CDA 230 Pipe  

 

Industries

Electrical Industry

Cements Industry

Electrical Contractor

Electrical Equipments

Manufacturing Industries

Sugar and paper Industry

Petrol & Chemical Industry

 

Our factory

Our factory specializes in the production and manufacturing of high-quality copper products. We operate a comprehensive, end-to-end production line equipped with advanced continuous casting and rolling mills, precision drawing machines, high-speed rolling mills, and automated heat treatment systems. We professionally produce a wide range of copper tubes, plates, bars, wires, and foils. A strict quality inspection system is implemented throughout the entire process, from raw material intake to finished product delivery. Supported by precision instruments such as spectrometers, metallographic microscopes, tensile testing machines, eddy current flaw detectors, and laser dimension gauges, we ensure that our products fully comply with international and domestic standards-including ASTM, EN, JIS, and GB-in terms of chemical composition, mechanical properties, dimensional accuracy, and surface quality. We are committed to providing global customers with stable, reliable, and fully-specified copper material solutions.

Brass coil thickness

Contact now

 

 

copper product packaging

Our products are packaged using professional, customized industrial packaging solutions to ensure they remain intact during long-distance transportation and multiple handlings. For long products such as copper tubes and bars, we use sturdy waterproof wooden crates or metal-frame boxes for secure fixing and protection. Copper plates and foils are individually wrapped with anti-rust paper, then packed into steel-edged boxes or on pallets with reinforced hard corners. Copper wires are wound with moisture-proof film and neatly coiled onto custom-designed reels or placed in wooden cases. All packaging is clearly marked according to customer requirements with shipping marks, specifications, batch numbers, and handling symbols. Desiccants can also be placed inside the packages when needed, providing complete protection against rust, moisture, and impact throughout the entire journey from production to the destination port.

Soft brass coil

Send Inquiry

whatsapp

Phone

E-mail

Inquiry