What Is C12000 Copper
C12000 is a phosphorus-deoxidized copper with a low residual phosphorus content of 0.004 to 0.012 percent and a minimum copper content of 99.90 percent. It is identified as Cu-DLP in the ISO system, CW023A in the EN system, and 2.0076 in the German numerical system. The phosphorus addition removes oxygen during casting, which eliminates the risk of hydrogen embrittlement during welding, brazing, and high-temperature service.
Chemical Composition
| Element | Content |
|---|---|
| Copper, including silver | 99.90 percent min |
| Phosphorus | 0.004-0.012 percent |
Physical and Mechanical Properties
C12000 combines excellent electrical and thermal conductivity with good formability. In the annealed condition it is soft and easily bent, while drawn tempers provide higher strength for structural applications. Hot working is carried out between 1400 and 1600 F, and annealing between 700 and 1200 F. Forgeability is rated 65 on the copper-alloy scale, and machinability is rated 20, so machining is usually limited to simple operations.
Joining Suitability
| Technique | Suitability |
|---|---|
| Brazing | Excellent |
| Soldering | Excellent |
| Gas shielded arc welding | Excellent |
| Oxyacetylene welding | Fair |
| Butt welding | Good |
| Spot and seam welding | Not recommended |
Applications
Refrigeration and air conditioning lines connecting compressors, condensers, and evaporators.
Heat exchangers, radiators, and power plant condensers.
Hot and cold water supply in buildings, valued for smooth bores and corrosion resistance.
Medical gas systems and industrial fluid lines.
Electrical busbars and high-conductivity components.
C12000 versus C11000
C11000 ETP copper contains oxygen and can develop hydrogen embrittlement in reducing atmospheres. C12000 is deoxidized with phosphorus, making it suitable for brazing, welding, and high-temperature service without that risk, at a small cost in conductivity, which remains very high at about 95 percent IACS.
Factors That Affect Tubing Cost
Several variables drive the final cost of C12000 tubing, and buyers comparing supply options should evaluate them together rather than looking at a single line item.
Raw material market: copper is traded on international exchanges, and LME and COMEX prices move daily.
Dimension: outside diameter, wall thickness, and length determine material weight per meter.
Temper and tolerance: drawn tempers and tight dimensional tolerances add processing steps.
Surface finish: bright annealed, polished, and oiled finishes require additional operations.
Order quantity and packaging: smaller orders carry higher per-unit logistics cost.
Frequently Asked Questions
Q: What is the difference between C11000 and C12000?
A: C11000 is electrolytic tough pitch copper that contains oxygen and risks hydrogen embrittlement; C12000 is phosphorus-deoxidized and safe for welding and brazing.
Q: Can C12000 be welded and brazed easily?
A: Yes, its deoxidized structure allows autogenous welding and brazing without flux for copper-to-copper joints.
Q: What are the main applications of C12000 tubes?
A: HVAC and refrigeration, heat exchangers and condensers, plumbing, medical gas lines, industrial piping, and busbars.
Q: Is C12000 corrosion resistant in water systems?
A: It performs well in clean, non-aggressive water, though acidic water, high velocity flow, ammonia, and sulfides can attack it.
Q: Is C12000 suitable for underground water lines?
A: Yes, thick-wall Type K tubing is a durable choice for burial in non-aggressive soils.
Q: What standards cover C12000 tubing?
A: ASTM B75 for seamless tube, B280 for ACR tube, EN 12735-1, and JIS H3300 are the key tubing standards.




