Brass H62: Structure and Properties

C28000 H62 Brass Material PDF

Brass H62 is a widely utilized copper alloy primarily composed of copper (Cu) and zinc (Zn), with a nominal composition of 62% copper and 38% zinc. Known for its excellent mechanical properties, corrosion resistance, and aesthetic appearance, H62 brass is commonly used in a variety of applications, ranging from plumbing and electrical components to decorative items. This article delves into the metallurgical structure, physical and chemical properties, mechanical behavior, and various applications of H62 brass, alongside a discussion of its processing techniques, historical background, and comparative analysis with other copper-zinc alloys.

The chemical composition of Brass H62 is characterized by a high copper content, with zinc as the principal alloying element. The typical composition is approximately 61.5% to 63.5% copper and the remainder zinc. Trace elements such as lead (Pb), iron (Fe), and silicon (Si) may be present in minute quantities, affecting the alloy's properties slightly. The composition of H62 is regulated by standards such as GB/T 5231 in China, which ensures consistency in its application.

H62 brass exhibits a dual-phase microstructure comprising α (alpha) and β (beta) phases. The α-phase is a solid solution of zinc in copper and is predominant in the alloy. It provides ductility and corrosion resistance. The β-phase, which is a more complex intermetallic phase, emerges as zinc content increases. In H62 brass, the β-phase is present in smaller quantities and contributes to the alloy's hardness and strength. The distribution and morphology of these phases are influenced by the cooling rate during solidification and subsequent heat treatment processes.

The α-phase of H62 brass has a face-centered cubic (FCC) structure, which is typical of copper and its alloys. This structure allows for a high degree of slip and deformation, leading to good ductility. The β-phase, in contrast, has a body-centered cubic (BCC) structure, which is less ductile but contributes to the alloy's overall strength. The crystallographic orientation and grain size of these phases play a crucial role in determining the mechanical properties of the alloy.

H62 brass is known for its excellent mechanical properties, which include a good balance between strength and ductility. The alloy has a typical tensile strength ranging from 300 to 400 MPa, with an elongation at break of about 40% to 60%. These properties can be tailored through various heat treatment processes, such as annealing, which can soften the alloy and improve its workability. The hardness of H62 brass, typically measured on the Brinell scale, can vary depending on the phase distribution and the degree of cold working it has undergone.

The thermal properties of H62 brass are characterized by its high thermal conductivity, which is a hallmark of copper-based alloys. The thermal conductivity of H62 brass is approximately 120 W/m·K, making it suitable for applications where heat dissipation is critical, such as in heat exchangers and radiators. The alloy also has a moderate coefficient of thermal expansion, which needs to be considered in applications involving temperature variations to prevent thermal stress and deformation.

H62 brass has good electrical conductivity, although it is lower than that of pure copper. The electrical conductivity of H62 brass is typically around 28% IACS (International Annealed Copper Standard), which is sufficient for many electrical and electronic applications, such as connectors and terminals. The presence of zinc, while lowering the conductivity compared to pure copper, also improves the alloy's mechanical strength, making it a better choice for components that require both electrical and mechanical performance.

The corrosion resistance of H62 brass is one of its most valued properties. The alloy exhibits good resistance to atmospheric corrosion, seawater corrosion, and various other environments. The α-phase is particularly resistant to corrosion, while the β-phase is slightly less so. The alloy's resistance to dezincification, a form of corrosion where zinc is selectively leached out of the alloy, is adequate for most applications, although it may require additional protective measures in highly aggressive environments.

H62 brass is highly formable and can be easily worked into various shapes through processes such as rolling, drawing, and extrusion. Its ductility allows for deep drawing and other complex forming operations without cracking. The machinability of H62 brass is also good, making it suitable for high-speed machining operations. The alloy can be easily drilled, milled, and turned, with good surface finish quality and tool life.

Heat treatment plays a significant role in adjusting the mechanical properties of H62 brass. Annealing is commonly used to soften the alloy and relieve internal stresses caused by cold working. The annealing temperature for H62 brass is typically in the range of 450°C to 600°C. Quenching after hot working or annealing can lead to the formation of a finer grain structure, improving the alloy's mechanical properties. The choice of heat treatment parameters depends on the desired balance between strength and ductility.

H62 brass is used in a wide range of applications due to its excellent combination of properties. In the plumbing industry, it is used for valves, fittings, and connectors due to its corrosion resistance and formability. In the electrical industry, it is used for terminals, connectors, and other components where both mechanical strength and electrical conductivity are required. H62 brass is also used in the manufacture of musical instruments, decorative items, and various household products, owing to its attractive appearance and ease of fabrication.

Compared to other brass alloys, H62 offers a good balance between cost and performance. For instance, while H70 brass, with a higher copper content, offers better corrosion resistance and electrical conductivity, H62 is more economical and has sufficient properties for many applications. Conversely, alloys with higher zinc content, such as H59, may offer better machinability but at the cost of reduced corrosion resistance. The choice of brass alloy depends on the specific requirements of the application, with H62 being a versatile option for general-purpose use.

We specialize in providing a comprehensive range of materials, including pure copper (C11000), brass (C26000, C28000), and phosphor bronze, available in various forms such as strips, sheets, tubes, and coils. Equipped with advanced rolling mills, continuous casting lines, and precision slitting equipment, we offer fully customizable dimensions, tempers (from soft annealed to full hard), and surface finishes (mill, bright, brushed) to meet specific customer requirements. Our integrated operation-from smelting and alloying to final inspection-ensures complete traceability and consistency. Certified to international standards such as ISO 9001, we implement rigorous SPC quality control at every stage.Please feel free to contact us anytime for detailed information and technical quotes.Mail：sales@gneemetal.com

Our export packaging system is specifically designed for high-value copper products, utilizing multi-layered industrial-grade protection. The standard process involves: wrapping the product with VCI (Vapor Corrosion Inhibitor) paper to effectively prevent salt spray corrosion during sea transportation; inserting reinforced wooden shafts into coil inner diameters and attaching high-strength plastic edge protectors to prevent edge damage; securely fastening the entire package to IPPC-marked fumigated wooden pallets with cross steel strapping for structural integrity; and finally, sealing the package entirely with waterproof stretch film to ensure moisture and dust resistance. All packaging is clearly marked with shipping labels and safety warnings, and combined with customized loading plans, maximizes container space utilization.