Dec 02, 2025 Leave a message

UNS-C44300-Admiralty-Brass-Tube.pdf

B111 C44300 Material: Admiralty Brass Tube Guide

What Is B111 C44300

ASTM B111 covers seamless tube and ferrule stock of copper and copper alloys for surface condensers, evaporators and heat exchangers. C44300 is the UNS number for admiralty brass, an alloy of copper, zinc and tin with an arsenic addition, sometimes called arsenical brass. It is used where the cooling water is salt, brackish or fresh and where resistance to dezincification is required.

International Equivalents

System Designation
UNS C44300
GB/T HSn70-1
EN CuZn28Sn1
BS CZ111
JIS C4430
DIN CuZn28Sn

Applications

C44300 tube is used in steam condensers cooled with seawater, fresh water or brackish water, in water heaters, heat exchangers, evaporator tubes, distiller tubes and Bourdon tubes, and in oil and gas systems where corrosion resistance is a key attribute. Its thermal conductivity of approximately 109 W/(m·K) supports efficient heat transfer in shell-and-tube equipment.

Mechanical Properties

In the annealed condition, C44300 tube has a tensile strength of approximately 310 to 345 MPa, a yield strength of about 105 MPa, and good elongation for tube rolling. Density is approximately 8.53 g/cm3, melting range is about 899 to 938 degrees Celsius, and the coefficient of thermal expansion is approximately 20.2 x 10-6 per degree Celsius between 20 and 300 degrees Celsius. These values allow standard tube-sheet design practice for condenser service.

Corrosion Performance and Limits

The alloy resists general corrosion, pitting and dezincification in clean and moderately polluted cooling water, and passes dezincification testing per ASTM B858. It is not recommended for high-velocity or highly polluted seawater service, where copper-nickel alloys such as C70600 give longer life. The tube should be stored and handled to avoid residual stress and ammonia exposure, which can promote stress-corrosion cracking in brass.

Frequently Asked Questions

Q: What does C44300 contain?

A: About 70 to 73 percent copper, 0.9 to 1.2 percent tin, 0.02 to 0.10 percent arsenic, with zinc as the balance.

Q: Why is C44300 called arsenical brass?

A: Because of its deliberate arsenic addition, which inhibits dezincification in seawater.

Q: What is the GB/T equivalent of C44300?

A: HSn70-1.

Q: Is C44300 suitable for high-velocity seawater?

A: Not for severe service; copper-nickel C70600 is the better choice above moderate velocities.

Q: Can C44300 tube be welded?

A: It is normally rolled, brazed or soldered; fusion welding is not recommended because of zinc volatilization.

Q: Which specifications cover this material?

A: ASTM B111 and ASME SB-111 for seamless condenser tube, and ASTM B359 for welded and drawn tube.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry