GNEE can provide the form
Copper has the following specs for C110 ETP copper:
|
ASTM B124 |
ASTM B152 |
ASTM B187 |
ASTM B370 |
DIN 2.0060 |
|
BS 2870 C101 |
BS 2874 C101 |
BS 2875 C101 |
EN CW004A |
ASTM B75/B68 |
Standard C11000 ETP Shapes & Sizes
Round Bar (1/8" dia to 8")
Square Bar (1/4" to 3")
Plate (36" wide - .1875" thick to 3")
Sheet (36" wide - .032", .0625", .125")
C11000 ETP Applications
Electrical
Telecommunications
Architectural
Antimicrobial
C11000 ETP Copper Chemical Properties
| Cu(1) | O | |
| Min./Max. | 99.90 min | - |
| Nominal | - | .04 |
C11000 ETP Copper Physical Properties
| Melting Point – Liquidus ⁰F | 1981 | |
| Melting Point – Solidus ⁰F | 1949 | |
| Density lb/cu in. at 68⁰F | 0.322(1) | |
| Specific Gravity | 8.91 | |
| Electrical Conductivity % IACS at 68⁰F | 101(2) | |
| Thermal Conductivity Btu/sq ft/ft hr/ ⁰F at 68⁰F | 226 | |
| Coefficient of Thermal Expansion 10-6 per ⁰F (68-212 ⁰F) | 9.4 | |
| Coefficient of Thermal Expansion 10-6 per ⁰F (68-392 ⁰F) | 9.6 | |
| Coefficient of Thermal Expansion 10-6 per ⁰F (68-572 ⁰F) | 9.8 | |
| Specific Heat Capacity Btu/lb/⁰F @ 68 ⁰F | 0.092 | |
| Modulus of Elasticity in Tension ksi | 17000 | |
| Modulus of Rigidity ksi | 6400 |
C11000 ETP Copper Fabrication Properties
| Alloy | Joining Technique | Suitability Level |
| C11000 | Soldering | Excellent |
| Brazing | Good | |
| Oxyacetylene Welding | Not Recommended | |
| Gas Shielded Arc Welding | Fair | |
| Coated Metal Arc Welding | Not Recommended | |
| Spot Weld | Not Recommended | |
| Seam Weld | Not Recommended | |
| Butt Weld | Good | |
| Capacity for Being Cold Worked | Excellent | |
| Capacity for Being Hot Formed | Excellent | |
| Forgeability Rating | 65 | |
| Machinability Rating | 20 |
C11000 ETP Copper Mechanical Properties
| FORM | TEMPER | TENSILE STRENGTH | YS-0.5% EXT (KSI) | ELONGATION (%) | ROCKWELL (B) | ROCKWELL (F) | ROCKWELL (30T) | SHEAR STRENGTH (KSI) | TORSION MODULUS (KSI) | IZOD (ft-lbs) | FATIGUE STRENGTH | TENSILE STRENGTH IN SHEAR | SECTION SIZE (IN) |
| PLATE SHEET STRIP BUS BAR | H02 | 42 | 36 | 14 | 40 | 84 | 50 | 26 | 13 | 0.04 | |||
| H01 | 38 | 30 | 35 | 25 | 70 | 25 | 25 | 0.025 | |||||
| H01 | 38 | 30 | 25 | 25 | 70 | 36 | 25 | 0.04 | |||||
| H00 | 36 | 28 | 40 | 10 | 60 | 25 | 0.025 | ||||||
| H00 | 36 | 28 | 30 | 10 | 60 | 25 | 25 | 0.04 | |||||
| M20 | 32 | 10 | 50 | 40 | 22 | 0.025 | |||||||
| M20 | 34 | 10 | 45 | 45 | 23 | 0.04 | |||||||
| H10 | 57 | 53 | 4 | 62 | 95 | 64 | 29 | 0.04 | |||||
| H04 | 50 | 45 | 12 | 28 | 0.24 | ||||||||
| H04 | 50 | 45 | 6 | 50 | 90 | 57 | 28 | 28 | 0.04 | ||||
| H04 | 45 | 40 | 20 | 45 | 85 | 26 | 1 | ||||||
| H04 | 50 | 45 | 12 | 50 | 90 | 28 | 0.025 | ||||||
| OS025 | 34 | 11 | 45 | 45 | 23 | 11 | 0.04 | ||||||
| OS050 | 32 | 10 | 50 | 40 | 22 | 0.025 | |||||||
| OS050 | 32 | 10 | 45 | 40 | 22 | 0.04 | |||||||
| H08 | 55 | 50 | 4 | 60 | 94 | 63 | 29 | 14 | 0.04 | ||||
| ROUND BAR ROD | M20 | 32 | 10 | 55 | 40 | 22 | 1 | ||||||
| H04 | 48 | 44 | 16 | 47 | 87 | 27 | 17 | 1 | |||||
| H04 | 45 | 40 | 20 | 45 | 85 | 26 | 6.4 | 32 | 2 | ||||
| H04 | 55 | 50 | 10 | 60 | 94 | 29 | 0.25 | ||||||
| OS050 | 32 | 10 | 55 | 40 | 22 | 1 | |||||||
| SHAPES PIPE | M30 | 32 | 10 | 50 | 40 | 22 | 0.5 | ||||||
| M20 | 32 | 10 | 50 | 40 | 22 | 0.5 | |||||||
| H04 | 40 | 32 | 30 | 35 | 26 | 0.5 |
Products provided by GNEE
| Product Form | Main Alloy / UNS Number (Select Common Grades) | Common ASTM Standards | Thickness / Diameter | Width / OD | Length | Surface Finish |
|---|---|---|---|---|---|---|
| Copper Tube/Pipe | C10100, C10200, C10300, C10800, C11000, C12000, C12200, C14200, C19200, C23000, C44300, C68700, C70600, C71500 | B75, B88, B111, B280, B395, B543 | 0.012" - 0.125" (0.3mm - 3.2mm) Wall | 1/8" - 6" (3.2mm - 152mm) OD | Straight: 10ft - 20ft (3m - 6m) Coils: Custom |
Drawn (Bright), Annealed (Soft), Bare, Tin-Plated |
| Copper Sheet/Plate | C10100, C10200, C11000, C11300, C11400, C11600, C12200, C14200, C19200, C22000, C26000, C26800, C27000, C51000, C52100, C54400, C63000, C77000 | B152, B370, B36 | Sheet: 0.006" - 0.188" (0.15mm - 4.8mm) Plate: > 0.188" (4.8mm) |
12" - 48" (305mm - 1220mm) or more | 36" - 144" (914mm - 3658mm) or more | Mill Finish, Polished (Mirror), Brushed, Oxidized, Pre-painted |
| Copper Bar/Rod | C10100, C11000, C11300, C11400, C11600, C14500, C14700, C15000, C15700, C18200, C18400, C18700, C36000, C46400, C48500, C63000, C64200, C65500, C67300, C67400 | B124, B16, B98, B138, B139, B196, B301 | Round: 1/8" - 6" (3mm - 150mm) Dia. Flat Bar: 1/4" - 12" (6mm - 305mm) Wide |
N/A for Rounds | 12ft - 20ft (3.6m - 6m) Standard | Drawn (Bright), Turned & Polished, Hot Rolled, Sand Blasted |
| Copper Wire | C10100, C10200, C11000, C11300, C11400, C11600, C15500, C16200, C21000, C22000, C23000, C26000, C27000, C51000, C52100, C54400, C63000, C77000 | B1, B2, B3, B105, B134, B159, B197 | 0.010" - 0.500" (0.25mm - 12.7mm) Dia. | N/A | Coils: 1lb to several thousand lbs | Bare (Bright), Annealed (Soft), Tin-Plated, Nickel-Plated, Enameled |
| Copper Foil | C10100, C10200, C11000, C11300, C11400, C11600 | B370, B152 (Often follows IPC-4101) | 0.0005" - 0.010" (12µm - 250µm) | 18" - 48" (457mm - 1220mm) | Rolls: 500ft - 5000ft (150m - 1500m) | Electrodeposited (ED), Rolled & Annealed (RA), Double-Treat |
