GNEE can provide the form
C70600 CU-NI 90/10 Copper Tube
ASTM B466 C70600 Copper Nickel Pipes
Chemical Composition ASTM B466 90/10 Pipes and Tubes
| Copper Alloy UNS Nos |
Copper incl Silver |
Nickel incl Cobalt |
Lead max |
Iron | Zinc,max | Manganese |
| C70600 | remainder | 9.0 to 11.0 | 0.05 | 1.0 to 1.8 | 1 | 1.0 max |
Mechanical Properties ASTM B466 90/10 Pipes and Tubes
| Standard Temper |
Former Temper |
Copper Alloy UNS Nos. |
Tensile Strength, min,ksi(MPa) |
Yield Strength,A min, ksi(MPa) |
RockwellB Hardness 30T |
| 060 | Soft annealC | C70600 | 38(260) | 13(90) | 45 max |
Copper Nickel 90/10 Pipe Dimension
| SPS | Outside Diameter,in.[mm] | Specials in.[mm] |
Specials in.[mm] |
Specials in.[mm] |
Specials in.[mm] |
Specials in.[mm] |
Regular in.[mm] |
Extra Strong in.[mm] |
| 1/8 | 0.405[10.3] | 0.058 [1.47] | – | – | – | – | 0.062[1.57] | 0.100 [254] |
| 1/4 | 0.540[13.7 | 0.065[1.65] | 0.072[1.83] | – | – | – | 0.082 [2.08] | 0.123 [3.12] |
| 3/8 | 0.675[17.1] | 0.065[1.65] | 0.072[1.83] | 0.095[2.41] | 0.148[3.76] | – | 0.090 [2.29] | 0.127 [3.23] |
| 1/2 | 0.840 [21.3] | 0.065 [1.65] | 0.072[1.83] | 0.120 [3.03] | 0.203 [5.16] | – | 0.107 [2.72] | 0.149[3.78] |
| 3/4 | 1.050 [26.7] | 0.065 [1.65] | 0.083[2.11] | 0.148 [3.76] | 0.238 [6.05] | – | 0.114 [2.90] | 0.157 [3.99] |
| 1 | 1.315 [33.4] | 0.065 [1.65] | 0.095[241] | 0.203[5.16] | 0.340[8.64] | – | 0.126 [3.20] | 0.182 [4.62] |
| 1 1/4 | 1.650 [42.4] | 0.072[1.83] | 0.095[241] | 0.120 [3.03] | 0.220 [5.59] | 0.380 [9.65] | 0.146 [3.71] | 0.194[4.93] |
| 1 1/2 | 1.900[48.3] | 0.072[1.83] | 0.109 [277] | 0.134 [3.40] | 0.250 [6.35] | 0.425[10.8] | 0.150 [3.81] | 0.203 [5.16] |
| 2 | 2.375 [60.3] | 0.083|2.11] | 0.120 [3.03] | 0.165 [4.19] | 0.340[8.64] | 0.520[13.2] | 0.156 [3.96] | 0.221 [5.61] |
| 2 1/2 | 2.875 [73.0] | 0.083 |2.11] | 0.134 [3.40] | 0203 [5.16] | 0.380 [9.65] | – | 0.187 [4.75] | 0.280 [7.11] |
| 3 | 3.500[88.9] | 0.095[2.41] | 0.165[4.19] | 0.250[6.35] | 0458 [11.6] | – | 0.219[5.56] | 0.304[7.72] |
| 3 1/2 | 4.000 [102] | 0.095[2.41] | 0.180[4.57] | 0284[7.21] | – | – | 0.250 [6.35] | 0.321 [8.15] |
| 4 | 4.500[114] | 0.109[2.77] | 0203 [5.16] | 0.340 [8.64] | – | – | 0.250 [6.35] | 0.341 [8.66] |
| 5 | 5.552[141] | 0.125[3.18] | 0.220[5.59] | 0.425 [10.8] | – | – | 0.250 [6.35] | 0.375 [9.52] |
| 6 | 6.625[168] | 0.134[3.40] | 0.259[6.58] | 0.457 [11.6] | – | – | 0.250 [6.35] | 0.437 [11.1] |
What is C70600 Copper Nickel Pipe used for?
Offshore and shipbuilding industry
Seawater cooling systems
Fire protection systems
Ballast water lines
Evaporators and condensers
Electricity generation
Condensers and heat exchanger tubes in power plants
Oil and gas industry
Chemical and petrochemical industry
Desalination of seawater
Products provided by GNEE
| Product Form | Main Alloy / UNS Number (Select Common Grades) | Common ASTM Standards | Thickness / Diameter | Width / OD | Length | Surface Finish |
|---|---|---|---|---|---|---|
| Copper Tube/Pipe | C10100, C10200, C10300, C10800, C11000, C12000, C12200, C14200, C19200, C23000, C44300, C68700, C70600, C71500 | B75, B88, B111, B280, B395, B543 | 0.012" - 0.125" (0.3mm - 3.2mm) Wall | 1/8" - 6" (3.2mm - 152mm) OD | Straight: 10ft - 20ft (3m - 6m) Coils: Custom |
Drawn (Bright), Annealed (Soft), Bare, Tin-Plated |
| Copper Sheet/Plate | C10100, C10200, C11000, C11300, C11400, C11600, C12200, C14200, C19200, C22000, C26000, C26800, C27000, C51000, C52100, C54400, C63000, C77000 | B152, B370, B36 | Sheet: 0.006" - 0.188" (0.15mm - 4.8mm) Plate: > 0.188" (4.8mm) |
12" - 48" (305mm - 1220mm) or more | 36" - 144" (914mm - 3658mm) or more | Mill Finish, Polished (Mirror), Brushed, Oxidized, Pre-painted |
| Copper Bar/Rod | C10100, C11000, C11300, C11400, C11600, C14500, C14700, C15000, C15700, C18200, C18400, C18700, C36000, C46400, C48500, C63000, C64200, C65500, C67300, C67400 | B124, B16, B98, B138, B139, B196, B301 | Round: 1/8" - 6" (3mm - 150mm) Dia. Flat Bar: 1/4" - 12" (6mm - 305mm) Wide |
N/A for Rounds | 12ft - 20ft (3.6m - 6m) Standard | Drawn (Bright), Turned & Polished, Hot Rolled, Sand Blasted |
| Copper Wire | C10100, C10200, C11000, C11300, C11400, C11600, C15500, C16200, C21000, C22000, C23000, C26000, C27000, C51000, C52100, C54400, C63000, C77000 | B1, B2, B3, B105, B134, B159, B197 | 0.010" - 0.500" (0.25mm - 12.7mm) Dia. | N/A | Coils: 1lb to several thousand lbs | Bare (Bright), Annealed (Soft), Tin-Plated, Nickel-Plated, Enameled |
| Copper Foil | C10100, C10200, C11000, C11300, C11400, C11600 | B370, B152 (Often follows IPC-4101) | 0.0005" - 0.010" (12µm - 250µm) | 18" - 48" (457mm - 1220mm) | Rolls: 500ft - 5000ft (150m - 1500m) | Electrodeposited (ED), Rolled & Annealed (RA), Double-Treat |
