C71500 is an alloy of copper and nickel, due to Ni unlimited solid solution in Cu, so C71500 has a single α-phase organization. C71500 alloy not only has good overall mechanical properties, but also due to the thermal conductivity close to carbon steel and become easy to weld, no preheating before welding, no need for heat treatment after welding.
C71500 for 70Cu-30Ni alloy, the main component for Cu, Ni, with a small amount of Mn and Fe, can better prevent corrosion of seawater, limit the impurity elements Zn, C, Pb, S, P and so on can improve the rate of thermoelectricity and weldability.
It has good corrosion resistance, high-temperature pressure resistance and thermal conductivity.C71500 copper alloy tube is suitable for a wide range of applications, including marine engineering, refrigeration and air conditioning systems, the chemical industry, and the oil and gas industry. It can withstand high temperatures, pressures and corrosion in harsh environments and ensure the e operation of equipment and piping.C71500 copper alloy tubing is a reliable material choice for a wide range of industrial applications.
ASTM B111 C71500 Chemical Composition
| Element | Content (%) |
| Copper, Cu | 70.0 |
| Nickel, Ni | 30.0 |
ASTM B111 C71500 Mechanical Properties
| Properties | Metric | Imperial |
| Tensile strength, ultimate | 372-517 MPa | 54000-75000 psi |
| Tensile strength, yield (depending on temper) | 88.0-483 MPa | 12800-70100 psi |
| Elongation at break (in 381 mm) | 45.0% | 45.0% |
| Charpy impact | 107 J | 78.9 ft-lb |
| Machinability (UNS C36000 (free-cutting brass) = 100%) | 20% | 20% |
| Shear modulus | 57.0 GPa | 8270 ksi |
| Poisson's ratio | 0.34 | 0.34 |
| Elastic modulus | 150 GPa | 21800 ksi |
Physical properties of ASTM B111 C71500
| Properties | Metric | Imperial |
| Density | 8.94 g/cm3 | 0.323 lb/in3 |
| Melting point | 2140°F | 1171°C |
Characteristic of ASTM B111 C71500
Excellent insulation performance
Elegant design
Super strength
Corrosion resistant
Durability
Application:
Hydraulic lines
Fish cages for aquaculture
Heat exchangers and condensers
Desalination units
Sea water pipework
Tubes for power plants and ships
Offshore fire water systems
Pumps, valves, sheathing and fittings for ship hulls
Desalination units
Copper products that GNEE can provide
|
High quality 99.9% pure copper pipe / straight copper tube / copper alloy pipe |
|||
|
Standard |
ASTM,DIN,BS,CDA,JIS,GB |
||
|
Material |
T1,T2,C10100,C10200,C10300,C10400,C10500,C10700,C10800, |
||
|
Shape |
Round,Square,Rectangular,etc. |
||
|
Specifications |
Round:wall thickness:0.2mm~120mm,outside diameter:2mm~910mm
Square:wall thickness:0.2mm~120mm,size:2mm*2mm~1016mm*1016mm Rectangularwall thickness:0.2mm~120mm,size:2mm*4mm~1016mm*1219mm |
||
|
Length |
3m,5.8m, 6m, 11.8m, 12m, or as required. |
||
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etc |
||
|
Surface |
mill,polished,bright,oiled,hair line,brush,mirror,sand blast,or as required. |
||
|
Price term |
EXW, FOB, CFR, CIF, etc. |
||
|
Payment term |
T/T |
||
|
Package |
Export standard package: bundled wooden box, suit for all kinds of transport, |
||
|
Delivery time |
According to order quantity |
||
|
Export to |
Singapore,Indonesia,Ukraine,Korea,Thailand, Vietnam, Saudi Arabia, Brazil, Spain, |
||
|
Application |
Copper pipe is the first choice of residential housing water pipes, heating, cooling pipes |
||
|
Straight copper rod/copper round bar |
|||
|
Standard |
ASTM,DIN,BS,CDA,JIS,GB |
||
|
Material |
T1,T2,C10100,C10200,C10300,C10400,C10500,C10700,C10800, |
||
|
Shape |
Round,Square,Rectangular,etc. |
||
|
Specifications |
Diameter:3~200mm |
||
|
Length |
3m,5.8m, 6m, 11.8m, 12m, or as required. |
||
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etc |
||
|
Surface |
mill,polished,bright,oiled,hair line,brush,mirror,sand blast,or as required. |
||
|
Price term |
EXW, FOB, CFR, CIF, etc. |
||
|
Payment term |
T/T |
||
|
Package |
Export standard package: bundled wooden box, suit for all kinds of transport, |
||
|
Delivery time |
According to order quantity |
||
|
Export to |
Singapore,Indonesia,Ukraine,Korea,Thailand, Vietnam, Saudi Arabia, Brazil, Spain, |
||
|
Application |
A copper rod is a type of colored metal processing bar stock with high electrical conductivity. It is mainly divided into brass |
||
|
Size |
Width: 10mm to 2000mm, |
||
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard. |
||
|
Surface |
Polished,bright,oiled,hair line,brush,mirror,or as required |
||
|
Package |
Plastic film with Wooden case or wooden pallet |
||
|
Delivery time |
Prompt delivery or upon your order quantity. |
||
|
Quality Control |
Mill Test Certification is supplied with shipment,Third Part Inspection is acceptable. |
||
|
Application |
widely used inair conditioners,refrigerators,electric,solar water heater, polished pipe an be used in decorative,such as stair |
||
|
Shape |
Round, Square, Oval, can be customized |
||
|
Item |
Copper Wire |
||
|
Standard |
ASTM,DIN,BS,CDA,JIS,GB |
||
|
Material |
T1,T2,C10100,C10200,C10300,C10400,C10500,C10700,C10800, |
||
|
Shape |
Round |
||
|
Specifications |
As required. |
||
|
Length |
As required. |
||
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etc |
||
|
Surface |
mill,polished,bright,oiled,hair line,brush,mirror,sand blast,or as required. |
||
|
Price term |
EXW, FOB, CFR, CIF, etc. |
||
|
Payment term |
T/T |
||
|
Package |
Export standard package: bundled wooden box, suit for all kinds of transport, |
||
|
Delivery time |
According to order quantity |
||
|
Application |
Copper wire, as a conductive material, is widely used in power transmission and electronic devices. Transformers, inductors, |
||
Copper CNC machined parts
|
Custom CNC Machining Parts of Most Materials
|
||||
|
Quotation
|
According to your drawing(size, material, thickness, processing content, and required technology, etc)
|
|||
|
Materials Avaiable
|
Brass,Stainless Steel,Q235&Q345 steel, Zinc-plate Sheet,Stainless Steel, Aluminum,Copper, etc.
|
|||
|
Surface Treatment
|
Zinc Plating, chrome plate, powder coating, anodizing, wire drawing, silk-screen printing, etc
|
|||
|
Processing
|
Laser Cutting, Precision Stamping, CNC Bending, CNC Milling, CNC Turning, Threading, Riveting, Drilling, CNC Punching,Die Casting, Laser Welding, etc.
|
|||
|
Testing Equipment
|
CMM/Tool microscope/multi-joint arm/Automatic height gauge/Manual height gauge/Dial gauge/Roughness measurement
|
|||
|
Drawing Formats
|
PRO/E, Auto CAD, Solid Works , UG, CAD / CAM / CAE, PDF
|
|||
|
Our Advantages
|
1.) 24 hours online service & Quickly Quote/Delivery.
2.) 100% QC quality inspection before delivery, and can provide quality inspection form.
3.) 18+ years of experience in the CNC machining area and have a senior design team to offer perfect modification suggestions. |
|||
|
Tolerance丨Surface Roughness
|
Generally +/-0.1-0.2mm
|
|||
|
Sample service
|
Avaliable before bulk order. Samples charge according your design, The sample fee can be used as the payment for mass goods.
|
|||
About Us
Founded in 2008, we specialize in exporting premium copper products. Our manufacturing leverages continuous casting lines and precision drawing machines. Rigorous quality control, including eddy current testing and spectrometer analysis, guarantees the superior performance of our copper tubes and coils for global applications.
If you need any help, please contact us immediately!
Email address：sales@gneemetal.com
Square Meters Built
Enterprise Employees
Cooperating Partner
Years Experience
