ASTM B111 C61300 copper pipe is a key member of the aluminum bronze family. Like C61400 and C64200, it belongs to the same copper-aluminum-based alloy family, but possesses unique chemical composition and performance characteristics. As an aluminum bronze with a high aluminum content, it excels in wear resistance and high-strength applications.
Basic Properties and Composition Analysis of ASTM B111 C61300 Copper Tube
Chemical Composition:
Copper (Cu): 86-89% (base metal)
Aluminum (Al): 6.0-8.0% (higher than C64200 but slightly lower than C61400)
Iron (Fe): 1.5-3.0% (enhances mechanical properties)
Manganese (Mn): ≤1.0% (improves hot workability)
Other: Zinc (Zn): ≤0.50%, Lead (Pb): ≤0.02%
Physical Parameters:
Density: 7.89 g/cm³ (equivalent to C61400)
Melting Point: 900-940°C
Electrical Conductivity: 12% IACS (International Annealed Copper Standard)
Thermal Conductivity: 48 W/(m·K)
Coefficient of Thermal Expansion: 18×10⁻⁶/°C (20-300°C)
Mechanical Properties:
Typical Mechanical Data:
Tensile Strength: 550-690 MPa (Annealed)
Yield Strength: 240-400 MPa (0.2% deviation)
Elongation: 18-30% (better than many engineering alloys)
Hardness: HRB 70-90 (heat-treatable)
Elastic Modulus: 110 GPa
Fatigue Limit: 230 MPa (10⁸ cycles)




Performance Advantages:
Excellent wear resistance: Hard phase formed by optimized aluminum content
High strength: Strengthening phase formed by iron
Impact Resistance: Good energy absorption
Seizure Resistance: Excellent when mated with steel
Work Hardening Response: Cold working can increase hardness by over 30%
Environmental Resistance of ASTM B111 C61300 Heat Exchanger Copper Tubing
Corrosion Resistance:
Seawater Corrosion Rate: <0.025 mm/year
Stress Corrosion Resistance: No sensitivity
Dezincification Resistance: Achieved through compositional control
Acid Resistance: Good resistance to dilute sulfuric acid (10%)
Alkali Resistance: Stable in alkaline solutions with a pH < 12
Temperature Adaptability:
High-Temperature Strength: Retains 70% of room-temperature strength at 300°C
Low-Temperature Toughness: No significant drop in impact strength at -50°C
Thermal Fatigue Resistance: Superior to ordinary bronze alloys
ASTM B111 C61300 Copper Plumbing Processing and Manufacturing Technology
Forming Process:
Hot Working Temperature: 750-850°C (optimal range)
Cold Working Rate: Up to 30% deformation
Casting Shrinkage: Approximately 1.6-2.0%
Machinability Rating: 65% (Based on free-cutting brass as 100%)
Joining Methods:
Welding: TIG welding is recommended, preheating to 200-300°C
Brazing: Suitable for brazing filler metals with a silver content greater than 45%
Mechanical Connections: Good threading performance
Heat Treatment:
Annealing: Hold at 600-700°C, then air cool
Stress Relief: Hold at 300-400°C for 2 hours
Quenching and Aging: Precipitation hardening is possible
Typical Applications of ASTM B111 C61300 Copper Gas Line
Heavy-Duty Bearing Systems:
Rolling Mill Bearing Sleeves
Stern Shaft Bearings for Ships
Support Bearings for Mining Machinery
Wear-Resistant Structural Parts:
Heavy-Duty Gears
Guide Pillars and Bushings
Hydraulic Press Slides
Marine Equipment:
Seawater Pump Impellers
Submarine Valve Assemblies
Offshore Platform Wear Rings
Special Industrial Components:
Injection Molding Machine Screws
Extruder Bushings
High-Temperature Mold Inserts
Safety Tools:
Explosion-Proof Tools
Non-Sparking Wrenches
Special Equipment for Flammable Environments
why choose us

Professional copper pipe supplier
As a professional enterprise dedicated to global copper product, GNEE Metal deeply recognizes the quality and responsibility embodied in the ASTM B111 standard. This standard not only specifies chemical composition and mechanical properties but also represents a comprehensive quality commitment spanning manufacturing processes to testing and verification. GNEE solemnly assures global customers that every ASTM B111-standard condenser tube and copper alloy tubing we supply will strictly adhere to its requirements for seamless manufacturing, annealing treatment, eddy current testing, and various mechanical performance tests.
Contact us today for a quotation:sales@gneesteel.com
Packaging and shipping
GNEE offers professional packaging for exported copper pipes. First, we apply anti-rust oil and plastic film to prevent oxidation. Then, we securely strap with steel straps and add corner protectors. Finally, we place the pipes on wooden pallets and reinforce them with iron or wooden boxes, ensuring they are moisture-proof and impact-resistant during ocean transport, while facilitating easy loading and unloading. All packaging meets export standards.





Customer visits










GNEE participated in the exhibition





