| Attribute | Value |
|---|---|
| Standard | ASTM B111/ ASME SB111 |
| Shape | Round Tube |
| Surface | Polished |
| Material | C44300 |
| Finish | Brush Polish, Cold Drawn, Pickled, Bright Annealed Or Un Annealed, Bright |
| Application | Boiler Tube, Hydraulic/Automobile Tube/ Heat Exchanger Tube |
Product Description
ASTM B111 / ASME SB111 C44300 Copper Alloy Tube Seamless is designed for condenser and cooling system applications. Our copper nickel tubes are widely used in condensers, heat exchangers, and similar applications, with exports to over 40 countries.
This American standard suction brass tube offers excellent mechanical properties, making it ideal for heat exchangers and conduits in contact with corrosive liquids. Particularly valued in thermal power plants for its high strength and corrosion resistance, the C44300 copper nickel tube features superior cold workability for condenser, evaporator, and heat exchanger applications.
International Standards
| Country | Standard | Name |
|---|---|---|
| ASTM | ASTM B111 | Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock |
| GB/T | GB/T8890 | Seamless Copper Alloy Heat Exchanger Tubes |
| BS | BS2871 | Copper and Copper Alloys Tubes |
| JIS | JIS H3300 | Copper and Copper Alloy-Seamless Pipes and Tubes |
| DIN | DIN1785 | Wrought Copper and Copper Alloy Tubes for Condensers and Heat Exchangers |
Chemical Composition
| Elements | Composition, % |
|---|---|
| Cu, incl. Ag | 70.0-73.0 |
| Sn | 0.9-1.2 |
| Pb | 0.06 max |
| Fe | 0.07 max |
| Zn | Balance |
| As | 0.02-0.06 |
Mechanical Properties
| Properties | Measurement |
|---|---|
| Yield strength | 105 MPa |
| Melting point | 899 ~ 938 °C |
| Tensile strength | 310 MPa |
| Thermal conductivity | 109 W/m-K @ 20.0 °C |
| Density | 8.53 g/cc |
| Heat capacity | 0.09 cal/g-°C @ 20ºC |
| CTE linear strength | 20.2 10-6/°C @ 20.0 - 300 °C |
Physical Properties
| Copper or Copper Alloy UNS No. | Melting Point | Density | Coefficients of Linear Thermal Expansion | Specific Heat Capacity | Thermal Conductivity |
|---|---|---|---|---|---|
| C44300 | 2140 - 2260 °C | 8.53 g/cm3 | 16.2 1×10-6/°C @ 20.0 - 30.0 °C | 0.09 cal/g-°C, 20 °C | 29 W/m-K, 20 °C |
Typical Applications
Industrial: Evaporator Tubing, Heat Exchanger Tubing, Condenser Tube Plates, Distiller Tubes, Oil Well Pump Liner, Ferrules, Bourdon Tubes, Condenser Tubes
Widely used in Industrial Steam Turbine Condensers
Plumbing: Strainers
Key Benefits
Durability: Products can last up to 10 years depending on usage conditions
Cost-effective: Offers excellent value for installation, operation, and maintenance
Versatile: Suitable for manufacturing various pipes and tubes for diverse applications
Quality Tests
Pitting Tests
Intergranular Corrosion Test
Chemical Analysis
Hardness Test
Copper products that GNEE can provide
|
High quality 99.9% pure copper pipe / straight copper tube / copper alloy pipe |
|||
|
Standard |
ASTM,DIN,BS,CDA,JIS,GB |
||
|
Material |
T1,T2,C10100,C10200,C10300,C10400,C10500,C10700,C10800, |
||
|
Shape |
Round,Square,Rectangular,etc. |
||
|
Specifications |
Round:wall thickness:0.2mm~120mm,outside diameter:2mm~910mm
Square:wall thickness:0.2mm~120mm,size:2mm*2mm~1016mm*1016mm Rectangularwall thickness:0.2mm~120mm,size:2mm*4mm~1016mm*1219mm |
||
|
Length |
3m,5.8m, 6m, 11.8m, 12m, or as required. |
||
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etc |
||
|
Surface |
mill,polished,bright,oiled,hair line,brush,mirror,sand blast,or as required. |
||
|
Price term |
EXW, FOB, CFR, CIF, etc. |
||
|
Payment term |
T/T |
||
|
Package |
Export standard package: bundled wooden box, suit for all kinds of transport, |
||
|
Delivery time |
According to order quantity |
||
|
Export to |
Singapore,Indonesia,Ukraine,Korea,Thailand, Vietnam, Saudi Arabia, Brazil, Spain, |
||
|
Application |
Copper pipe is the first choice of residential housing water pipes, heating, cooling pipes |
||
|
Straight copper rod/copper round bar |
|||
|
Standard |
ASTM,DIN,BS,CDA,JIS,GB |
||
|
Material |
T1,T2,C10100,C10200,C10300,C10400,C10500,C10700,C10800, |
||
|
Shape |
Round,Square,Rectangular,etc. |
||
|
Specifications |
Diameter:3~200mm |
||
|
Length |
3m,5.8m, 6m, 11.8m, 12m, or as required. |
||
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etc |
||
|
Surface |
mill,polished,bright,oiled,hair line,brush,mirror,sand blast,or as required. |
||
|
Price term |
EXW, FOB, CFR, CIF, etc. |
||
|
Payment term |
T/T |
||
|
Package |
Export standard package: bundled wooden box, suit for all kinds of transport, |
||
|
Delivery time |
According to order quantity |
||
|
Export to |
Singapore,Indonesia,Ukraine,Korea,Thailand, Vietnam, Saudi Arabia, Brazil, Spain, |
||
|
Application |
A copper rod is a type of colored metal processing bar stock with high electrical conductivity. It is mainly divided into brass |
||
|
Size |
Width: 10mm to 2000mm, |
||
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard. |
||
|
Surface |
Polished,bright,oiled,hair line,brush,mirror,or as required |
||
|
Package |
Plastic film with Wooden case or wooden pallet |
||
|
Delivery time |
Prompt delivery or upon your order quantity. |
||
|
Quality Control |
Mill Test Certification is supplied with shipment,Third Part Inspection is acceptable. |
||
|
Application |
widely used inair conditioners,refrigerators,electric,solar water heater, polished pipe an be used in decorative,such as stair |
||
|
Shape |
Round, Square, Oval, can be customized |
||
|
Item |
Copper Wire |
||
|
Standard |
ASTM,DIN,BS,CDA,JIS,GB |
||
|
Material |
T1,T2,C10100,C10200,C10300,C10400,C10500,C10700,C10800, |
||
|
Shape |
Round |
||
|
Specifications |
As required. |
||
|
Length |
As required. |
||
|
Hardness |
1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etc |
||
|
Surface |
mill,polished,bright,oiled,hair line,brush,mirror,sand blast,or as required. |
||
|
Price term |
EXW, FOB, CFR, CIF, etc. |
||
|
Payment term |
T/T |
||
|
Package |
Export standard package: bundled wooden box, suit for all kinds of transport, |
||
|
Delivery time |
According to order quantity |
||
|
Application |
Copper wire, as a conductive material, is widely used in power transmission and electronic devices. Transformers, inductors, |
||
Copper CNC machined parts
|
Custom CNC Machining Parts of Most Materials
|
||||
|
Quotation
|
According to your drawing(size, material, thickness, processing content, and required technology, etc)
|
|||
|
Materials Avaiable
|
Brass,Stainless Steel,Q235&Q345 steel, Zinc-plate Sheet,Stainless Steel, Aluminum,Copper, etc.
|
|||
|
Surface Treatment
|
Zinc Plating, chrome plate, powder coating, anodizing, wire drawing, silk-screen printing, etc
|
|||
|
Processing
|
Laser Cutting, Precision Stamping, CNC Bending, CNC Milling, CNC Turning, Threading, Riveting, Drilling, CNC Punching,Die Casting, Laser Welding, etc.
|
|||
|
Testing Equipment
|
CMM/Tool microscope/multi-joint arm/Automatic height gauge/Manual height gauge/Dial gauge/Roughness measurement
|
|||
|
Drawing Formats
|
PRO/E, Auto CAD, Solid Works , UG, CAD / CAM / CAE, PDF
|
|||
|
Our Advantages
|
1.) 24 hours online service & Quickly Quote/Delivery.
2.) 100% QC quality inspection before delivery, and can provide quality inspection form.
3.) 18+ years of experience in the CNC machining area and have a senior design team to offer perfect modification suggestions. |
|||
|
Tolerance丨Surface Roughness
|
Generally +/-0.1-0.2mm
|
|||
|
Sample service
|
Avaliable before bulk order. Samples charge according your design, The sample fee can be used as the payment for mass goods.
|
|||
About Us
Founded in 2008, we specialize in exporting premium copper products. Our manufacturing leverages continuous casting lines and precision drawing machines. Rigorous quality control, including eddy current testing and spectrometer analysis, guarantees the superior performance of our copper tubes and coils for global applications.
If you need any help, please contact us immediately!
Email address：sales@gneemetal.com
Square Meters Built
Enterprise Employees
Cooperating Partner
Years Experience
