Sep 02, 2025 Leave a message

Application Characteristics of Domestic Brass Grades

1. H59 Brass: H59 is a common brass; it has high strength and hardness, but can still withstand pressure processing even after heat treatment, has excellent corrosion resistance, and other properties are similar to H62. It is used for general machine parts, welded parts, and hot stamping and hot rolling parts.

2. H62 Brass: A common brass; it has excellent mechanical properties, good ductility in the hot state and acceptable ductility in the cold state, good machinability, easy brazing and welding, and corrosion resistance. Furthermore, it is inexpensive and is a common brass variety with a wide range of applications. It is used for various deep drawing and bending parts, such as pins, rivets, washers, nuts, pipes, pressure gauge springs, screens, radiator parts, etc.

3. H63 Brass: H63 is a national standard brass; it is suitable for cold pressure processing and is suitable for welding and brazing. It is easy to polish and is the main alloy for wire drawing, rolling, bending, and other forming processes. It is used for screws, pickling rollers, etc.

4. H65 Brass: H65 is a national standard brass; its performance lies between H68 and H62, but it is cheaper than H68. It also has higher strength and ductility, and can withstand both cold and hot pressure processing. It is used for small hardware, daily necessities, small springs, screws, rivets, and mechanical parts.

5. H68 Brass: A national standard brass; it has extremely good ductility (the best among brasses) and high strength, good machinability, easy welding, and is resistant to general corrosion, but prone to cracking. It is the most widely used brass. Brass is used for complex cold-stamped and deep-drawn parts, such as radiator housings, conduits, bellows, cartridge cases, and gaskets.

6. H70 Brass: A neutral brass with excellent ductility (the best among brasses) and high strength. It offers excellent machinability, is easily welded, and is resistant to general corrosion. It is used for complex cold-stamped and deep-drawn parts, such as radiator housings, conduits, bellows, cartridge cases, and gaskets.

copper pipe soldering
aircon copper pipe
aircon copper tube
copper pipe for aircon

7. H75 Brass: A neutral brass with excellent mechanical properties, processability, and corrosion resistance. It can be press-worked well in both hot and cold conditions. Its performance and economics lie between H80 and H70. It is used for low-load, corrosion-resistant springs.

8. H80 Brass: A high-refine brass with similar properties to H85, but with higher strength and ductility. It exhibits superior corrosion resistance in air, freshwater, and seawater. It is used for papermaking mesh, thin-walled pipes, bellows, and building materials.

9. H85 Brass: H85 high-refined brass offers high strength and good ductility, and can withstand cold and hot pressure processing, welding, and corrosion resistance. It is used for condenser and heat dissipation pipes, siphons, coils, and cooling equipment components. 10. H90 High-refined Brass: Its properties are similar to H96, but its strength is slightly higher. It can be plated, extruded, or enameled. It is used for water supply and drainage pipes, medals, artwork, water tank straps, and bimetallic strips.

10. H96 Brass: It is stronger than red copper (but the weakest among ordinary brasses), has good electrical and thermal conductivity, and has high corrosion resistance in air and fresh water. It also has good ductility, is easy to cold and hot pressure process, weld, forge, and tin plate, and is not prone to stress corrosion cracking.

about Us

The company has a cluster of leading copper processing production lines in China, including:
German imported precision copper tube production line (annual output of 30,000 tons)
Japanese technology copper foil rolling line (thinnest up to 6μm)
Fully automatic copper bar continuous extrusion line
Intelligent copper sheet and strip finishing mill unit
Digitalized control and management of the whole production process is realized through MES system, and the dimensional accuracy of the products can reach ±0.01mm.

4242

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry