Jan 29, 2026 Leave a message

AI Demand Soars, Copper Prices Surge to Historic Highs

Experts say that the ultimate constraint for AI is energy. Another statement also seems valid: the ultimate constraint for AI is copper.

 

In a recent research report, Goldman Sachs declared copper the "new oil" of the AI era. The logic is that AI development depends on data center computing power, data centers require massive and stable electricity, and the stability of power transmission is inseparable from copper.

 

Emerging industries are also accelerating copper consumption. A senior researcher with the China Nonferrous Metals Economy Research Institute told a newspaper that AI development, the new energy transition, and grid upgrades are driving explosive global demand for copper. For example, in the new energy sector, each electric vehicle uses about 80 kilograms of copper, which is 4 to 5 times that of a conventional fuel-powered car.

 

In May this year, the United Nations Conference on Trade and Development stated that copper has become a new type of strategic raw material in the fields of clean energy and digital technology. Driven by these factors, a battle for copper has erupted worldwide.

 

Copper prices are also constantly rewriting the record books.

 

Market perceptions of copper fundamentals are largely aligned: a significant long-term supply-demand gap and short-term supply contraction. However, macroeconomic factors have weakened the short-term momentum for further dramatic price gains, as domestic and international macro policies entered a vacuum period in November.

 

As earlier positive factors are gradually digested, a return to rational market sentiment is inevitable. Yet, against the backdrop of sustained tight global copper supply, the downside for copper prices may be limited.

 

October: A Historic Month for Copper Prices

Let's look at the numbers. In October, London Metal Exchange (LME) copper futures prices surged, hitting an all-time high of $11,200 per ton during trading on October 29th. Over the entire month, LME copper prices accumulated a gain of over 6%.

After entering November, market enthusiasm cooled, and LME copper prices entered a period of volatile consolidation. As of November 6th, LME copper settled at $10,687 per ton, down 1.5% for the month.

From a low of $10,263/ton at the month's start to the peak of $11,200/ton, LME copper futures displayed an overall volatile upward trend throughout October.

While October's monthly gain was not the most extreme in recent years (April 2024 saw a 12.51% surge), the feat of setting a new record high of $11,200/ton was enough to make this month historic.

So, why did copper prices hit a record in October?

 

News from the supply side struck the market first.

This past September, a major mining accident threw the world's second-largest copper mine into a production storm. On September 24th, a major U.S. mining company announced that a large-scale mudslide occurred at its Grasberg mine in Indonesia on September 8th. The company invoked force majeure, stating the Grasberg project would reduce output by 200,000 tons in Q4 2025 and nearly 270,000 tons in 2026, with a return to pre-accident production levels not expected until 2027 at the earliest.

 

Earlier this year, two other top mines had already downgraded their 2025 production guidance: in May, a seismic event at the Kamoa-Kakula copper mine (the world's fourth-largest) led to a reduction of nearly 150,000 tons in its 2025 target; in July, a mine collapse caused by an earthquake at Chile's El Teniente, the world's largest underground copper mine, would reduce its 2025 output by 300,000 tons.

 

Industry analysts point out that these three major accidents have led to significant production shrinkage this year, especially with the Grasberg incident negatively impacting output for the next two years. This has pushed the already tight copper market into a state of acute tension.

 

Meanwhile, major miners signaled disappointing production growth. In Q3 2025, Glencore's copper output was 239,600 tons, down 1% year-on-year; First Quantum's Q3 copper production was only 104,600 tons, a 9.9% decrease. Only Rio Tinto reported a year-on-year increase in Q3 copper production to 204,000 tons, but this still represented a sequential decline of over 11%.

 

According to TF Securities, 2025 copper mine supply growth has fallen short of expectations again, with the annual growth rate continuing to decline from 2024. "Global copper mine production is expected to decrease by 23,000 tons in 2025."

copper tube supplier ASTM B88
oxygen free copper rod manufacturer
copper sheet supplier marine grade
wholesale copper products factory price
brass strip coil for connectors

Long-Term Demand Stimulated by AI and Other Factors

Structural changes in medium to long-term demand provided a foundation for October's price increase.

Copper's downstream applications span power, construction, home appliances, transportation, and electronics, making it a core industrial material. Demand from its traditional uses in power, construction, and home appliances has actually slowed in recent years.

 

Specifically:

Grid investment's copper demand growth is expected to remain low. Data shows that in the first three quarters of 2025, China's power grid project investment reached 437.8 billion yuan, a 9.9% year-on-year increase. However, in October, the operating rate of Chinese copper wire and cable enterprises fell to 67.8%, the lowest level for the same period in recent years. Analysts point out that high copper prices have significantly dragged down downstream cable orders.

Copper demand from construction and home appliances continues to decline. This stems from lower-than-expected production growth in these traditional sectors. Data shows that from January to September 2025, the floor space of buildings under construction by Chinese real estate developers decreased by 9.4% year-on-year. Cumulative output growth for air conditioners, refrigerators, washing machines, and TVs has also been sluggish.

 

However, beyond its traditional role as an industrial metal, new economies like computing power and new energy are redefining copper's attributes and granting it long-term demand growth potential.

 

The national development blueprint proposes cultivating and strengthening emerging and future industries, accelerating innovation in AI and other digital technologies, and enhancing the efficient supply of computing power. This implies that new energy fields (wind, solar, EVs) will see scaled growth, driving long-term copper demand. Simultaneously, AI computing power construction and industries like humanoid robots are igniting market expectations for future copper demand increments. Bank of America predicts that by 2030, copper demand directly driven by AI data centers in China alone will grow to nearly 1 million tons, accounting for 5% to 6% of China's total copper demand at that time.

 

It should be noted that new economy demand for copper is a medium-to-long-term factor. Once the market fully digests this expectation, copper prices would need new catalysts to continue creating miracles.

 

Will Copper Prices Set New Highs in 2026?

As positive news from supply-demand dynamics and macro factors is absorbed, copper prices lacked upward momentum entering November. Cooling market sentiment led to a price retreat.

 

On November 4th, LME copper futures fell 1.90% intraday, touching a low of $10,577.5/ton. Prices have since recovered slightly above $10,700/ton.

 

However, some institutions remain optimistic about copper prices reaching new historical highs next year.

 

CSC Futures believes that in 2026, "the supply-demand gap is expected to widen, and copper prices are poised to scale new peaks."

 

Two factors support this view:

The agency expects China's apparent demand for refined copper to be stable in Q4 2025, but supply may decline sequentially due to raw material shortages and potential policy adjustments. Inventories are projected to fall below the five-year average.

2026 marks the first year of a new national development plan. Historically, power grid investment sees over 10% growth in the first year of such plans, potentially driving stronger-than-expected copper demand. Simultaneously, global AI development next year will continue to support steady demand growth.

 

Based on this, CSC Futures expects the average price center for LME copper to rise from $9,700/ton in 2025 to $11,000/ton in 2026.

 

Overall, institutions largely share the view of "increased short-term volatility but a rising long-term price center." For instance, GF Futures notes that short-term price corrections are a market digestion of excessive gains. In the long run, the tight balance shaped by structural supply constraints and disruptive demand growth solidifies copper's strategic status.

 

However, it's worth noting that $11,000/ton seems to be a key threshold for some institutions regarding LME copper price levels.

 

While Goldman Sachs raised its 2026 copper price forecast to $10,500/ton in October and remains bullish, it sees $11,000/ton as the upper limit for the next two years. The rationale is that the copper market is currently in a slight surplus, a condition expected to persist into 2026.

 

Our product range

Product Category Product Name Common Standard Grades Key Specifications (Typical)  
Copper Tubes / Pipes • Straight & Coiled Tubes
• Refrigeration Tubes
• Capillary Tubes
• Heat Exchanger Tubes
C11000 (ETP Copper)
C12200 (DHP Phosphorous Copper)
C12000 (DLP Phosphorous Copper)
EN 12735-1: CU-DHP
JIS H3300: C1220, C1100
Standards: ASTM B75, B88, B280, EN 12735
OD: 3mm - 300mm
Wall Thickness: 0.3mm - 10mm
Condition: Annealed (O), Hard (H)

Get Free Sample

Copper Sheets / Plates • Hot Rolled Plates
• Cold Rolled Sheets
• Cut-to-Size Blanks
C11000 (ETP Copper)
C10200 (Oxygen-Free Copper)
C26000 (Cartridge Brass)
C70600 (90-10 CuNi)
Standards: ASTM B152, B465
Thickness: 0.5mm - 50mm (Plates: >3mm)
Width: up to 1500mm
Length: up to 4000mm or custom
Condition: Rolled, annealed, mill finish

Get Free Sample

Copper Rods / Bars • Round, Square, Hexagonal Rods
• Copper Alloy Rods
• Precision Ground Bars
C11000 (ETP Copper)
C36000 (Free-Cutting Brass)
C26000 (Cartridge Brass)
C10200 (Oxygen-Free Copper)
C17200 (Beryllium Copper)
Standards: ASTM B187, B301, EN 12163, 12164
Diameter: 2mm - 200mm
Length: Straight bars up to 6m, coils available
Condition: Drawn, extruded, annealed

Get Free Sample

Copper Wires • Bare Copper Wire (Hard/Soft)
• Enamelled (Magnet) Wire
• Stranded & Bunched Wires
• Braided Wires & Flexibles
C11000 (ETP Copper)
C10200 (Oxygen-Free Copper)
C10100 (C-OF Copper)
Grade: 1/2 Hard, 1/4 Hard, Soft
Standards: ASTM B1, B2, B3, IEC 60228
Diameter: 0.05mm - 12mm (bare)
Conductivity: 100% IACS min.
Packaging: Spools, coils, drums

Get Free Sample

Copper Foils • Rolled Strips (in Coils)
• Thin Foils
• Connector Alloy Strips
C11000 (ETP Copper)
C26000 (Cartridge Brass)
C19210 (Phosphor Bronze, 1.0%)
C26800 (Yellow Brass)
Standards: ASTM B152, B465, EN 1652
Thickness: 0.05mm - 3.0mm (Strips), <0.05mm (Foil)
Width: 10mm - 600mm (typical coil width)
Condition: Hard (H), 1/2 Hard, Soft (O), rolled temper

Get Free Sample

 

Our factory

We are a specialized manufacturing factory with integrated production capabilities for copper and copper alloy products, including tubes, rods, bars, plates, sheets, strips, and wires. Our facility is equipped with modern production lines featuring extrusion presses, continuous casting machines, precision rolling mills, drawing benches, and controlled annealing furnaces, enabling us to control the entire process from raw material to finished product. Supported by an in-house laboratory for quality assurance and compliant with international standards (ASTM, EN, JIS), we provide customized solutions, reliable packaging, and efficient export logistics to serve global clients in HVAC&R, electrical, automotive, and industrial sectors.

pure copper

 

copper product packaging

We take great care in packaging to ensure our copper products arrive in perfect condition. Standard packaging includes moisture-resistant materials, sturdy wooden crates or pallets, and protective corner guards to prevent damage during transit. For products requiring enhanced protection against oxidation, such as high-purity copper tubes or finely finished surfaces, we also offer optional nitrogen-purged (inert gas) packaging upon request. This service effectively minimizes surface oxidation during long-distance shipping or storage, ensuring your products maintain their optimal quality upon arrival.

ASTM B280 copper pipe

Get Fast Quote & Logistics Plan

Send Inquiry

whatsapp

Phone

E-mail

Inquiry