Henan Gnee New Material Co., Ltd. is one of the most professional manufacturers and suppliers of c10100 ofhc high conductivity copper tube in China, specialized in providing high quality copper products with competitive price. Welcome to buy discount c10100 ofhc high conductivity copper tube for sale here from our factory. Customized orders are welcome.

C10100 OFHC Copper Tubing

GNEE Copper carries C10100 Oxygen Free High Conductivity Copper (OFHC) Tubing in a wide range of sizes and will cut the material to length.

What is C10100 Oxygen-Free Electronic Copper?

C10100 Oxygen-Free Electronic Copper, also known as OFE, is a 99.99% pure copper with 0.0005% oxygen content. C101 achieves a minimum 101% IACS conductivity rating. This copper is finished to a final form in a carefully regulated, oxygen-free environment. C10100 OFE has High ductility, high electrical and thermal conductivity and low volatility under high vacuum.

C10100 Oxygen Free (OFHC) Copper pipe is produced by the direct conversion of selected refined cathodes and castings under carefully controlled conditions to prevent contamination of the pure oxygen-free metal during processing. The method of producing OFHC copper ensures extra high grade of metal with a copper content of 99.99%. With so small a content of extraneous elements, the inherent properties of elemental copper are brought forth to a high degree.

What is OFHC copper?

Oxygen-free copper (OFC) or oxygen-free high thermal conductivity (OFHC) copper is a group of wrought high-conductivity copper alloys that have been electrolytically refined to reduce the level of oxygen to 0.001% or below.Oxygen-free copper is a premium grade of copper that has a high level of conductivity and is virtually free from oxygen content.

Oxygen-free copper is typically specified according to the ASTM/UNS database.The UNS database includes many different compositions of high conductivity electrical copper. Of these, three are widely used and two are considered oxygen-free:

• C10100 – also known as oxygen-free electronic (OFE). This is a 99.99% pure copper with 0.0005% oxygen content. It achieves a minimum 101% IACS conductivity rating. This copper is finished to a final form in a carefully regulated, oxygen-free environment. Silver (Ag) is considered an impurity in the OFE chemical specification. This is also the most expensive of the three grades listed here.

• C10200 – also known as oxygen-free (OF). While OF is considered oxygen-free, its conductivity rating is no better than the more common ETP grade below. It has a 0.001% oxygen content, 99.95% purity and minimum 100% IACS conductivity. For the purposes of purity percentage, silver (Ag) content is counted as copper (Cu).

• C11000 – also known as electrolytic-tough-pitch (ETP). This is the most common copper. It is ubiquitous in electrical applications. ETP has a minimum conductivity rating of 100% IACS and is required to be 99.9% pure. It has 0.02% to 0.04% oxygen content (typical). Most ETP sold today meets or exceeds the 101% IACS specification. As with OF copper, silver (Ag) content is counted as copper (Cu) for purity purposes.

C10100 CHEMICAL COMPOSITION

(%max., unless shown as range or min.)
NOTE: Information courtesy copper.org

C11000 copper pipe

A type of non-ferrous metal pipe, often divided into brass and copper pipes, is pressed and drawn seamless pipe. Copper pipe has good electrical conductivity, thermal conductivity characteristics, electronic products of conductive parts and heat dissipation parts of the main material, and has become a modern contractor in all residential commercial housing water pipeline, heating, cooling pipe installation of the first choice. Copper pipe has strong corrosion resistance and is not easy to oxidize.

Parameter

C10100 Oxygen Free Copper Plate / Tube

Typical uses for C10100 Oxygen Free Copper

AUTOMOTIVE: Automotive Rectifiers

ELECTRICAL: Transistor Component Bases, High Resistance-Ratio Cryogenic Shunts, Bus Conductors, Wave Guides, Hollow Conductors, Anodes for Vacuum Tubes, Coaxial Cable, Coaxial Tube, Klystrons, Microwave Tubes, Bus Bars, Lead-in Wire, Vacuum Seals, Conductors, Glass-to-Metal Seals

Specifications

What is the electrical conductivity of OFHC copper?

' 'Oxygen-free, high conductivity' (OFHC) grade copper has room temperature electrical conductivities equal to or greater than 100% International Annealed Copper Standard (IACS), where 100% IACS = 17.241 nΩ m at 20 °C.

What is the difference between copper C101 and C10100?

C101 achieves a minimum 101% IACS conductivity rating. This copper is finished to a final form in a carefully regulated, oxygen-free environment. C10100 OFE has High ductility, high electrical and thermal conductivity and low volatility under high vacuum.

What is the copper equivalent of C10100?

C101 Copper is functionally equivalent to C10100 and has the same composition with high purity and virtually no oxygen. This composition is crucial for electrical and thermal conductivity and resistance to corrosion.

What is the difference between OFHC and ETP copper?

Electrical Conductivity •⁠ ⁠OFHC Copper: It has a minimum conductivity of 100% IACS. ⁠ ⁠ETP Copper: Its nominal conductivity is 100% - 101.5% IACS, but in some cases, it may be slightly lower than OFHC copper, with a minimum of 99.99% IACS.

What is the difference between C101 and C102 copper?

Copper alloy C101 is the base material that common brasses and bronzes are produced from. 101 copper is 99.99% pure, and C102 copper is 99.95% pure, contain essentially no oxygen.

What is the difference between C10100 and C10200?

Virtually the same product as C10200 OFC, the difference between the two is that C10100 comes certified as oxygen free, whereas 102 does not.

Is C101 copper oxygen free?

C101 Copper is an Oxygen Free Electronic Copper. This is a 99.99% pure copper having a 0.0005% oxygen content. This grade has a minimum 101% IACS conductivity rating, and it is valued more for the chemical purity than the electrical conductivity.

What is the difference between C11000 and C10100?

Oxygen-free copper is available in the following three grades: C10100 (OFE): 99.99% pure copper with 0.0005% oxygen content. C10200 (OF): 99.95% pure copper with 0.001% oxygen content. C11000 (ETP): 99.9% pure copper with 0.02% to 0.04% oxygen content.

What is equivalent to C10100?

C10100 is equivalent to CW009A (EN/DIN), C101 (BS), C1020 (JIS), and Cu-OF (ISO), and complies with several ASTM standards such as B170 and B152. Its purity and conductivity make it the preferred choice for high-end electrical and electronic components.

What is C101 copper specification?

C101/CW004A is the designation for the 99.9% pure copper used in a range of engineering applications. C101/CW004A is also known as HC or high conductivity copper. It has a nominal conductivity of 100% IACS (International Annealed Copper Standard). It also has high thermal conductivity.

Is C11000 pure copper?

The most popular form of pure copper is the standard electrical wire grade of copper (C11000) contains 99.95% Cu, 0.03% O2, and less than 50 ppm metallic impurities.

Hot Tags: c10100 ofhc high conductivity copper tube, China c10100 ofhc high conductivity copper tube manufacturers, suppliers, factory, copper, C27200 copper plumbing, C28000 copper hose, C22000 soft copper tubing, C26000 copper pipe, soft copper tubing, C27000 type l copper