C11000 Copper Strip
video

C11000 Copper Strip

With its high purity, excellent electrical and thermal conductivity and corrosion resistance, C11000 copper alloy plays an irreplaceable role in many fields such as electrical, electronic and mechanical manufacturing.
Product Introduction

Henan Gnee New Material Co., Ltd. is one of the most professional manufacturers and suppliers of c11000 copper strip in China, specialized in providing high quality copper products with competitive price. Welcome to buy discount c11000 copper strip for sale here from our factory. Customized orders are welcome.

 

C11000 Electrolytic Tough Pitch (ETP) Copper Strip

C11000 Copper Strip, also known as Electrolytic Tough Pitch (ETP) Copper, is a high-purity copper alloy (minimum 99.90% Cu) used extensively in electrical and industrial applications due to its exceptional conductivity and ductility.

 

C11000 (UNS C11000, ASTM B152/B187, ISO CW004A)
Also known as phosphorized copper or ETP copper (Electrolytic Tough Pitch), with a minimum copper content of 99.90% and trace oxygen (≤0.06%).

 

C11000 electrolytic copper strip is a high-purity copper alloy with a copper content of more than 99.90% and extremely low impurity content. It is mainly composed of copper and trace oxygen. This material is widely used in many fields, including electrical, electronic, construction, industry and aerospace, due to its excellent electrical conductivity, thermal conductivity, corrosion resistance and processing performance.

 

The size range and standards of C11000 electrolytic copper strip are as follows:

 

Size range

Thickness range

Depending on the product form, the thickness varies greatly:

Thin strip/foil: 0.005mm~3.0mm, suitable for fine stamping or electronic components.

Conventional strip: 0.15mm~12mm, some plates can reach 12mm (such as 1/4"~3/4" or 6.35~19.05mm).

Special applications: For example, the thickness of copper rods can reach 200mm, but the strip generally does not exceed 12mm.

Width range

Narrow strip: 8mm~610mm;

Wide strip: 20mm~1200mm, some suppliers support customization up to 1250mm.

Length and weight

Common plate sizes are 914mm×914mm or 1000mm×1100mm;

The maximum coil weight is 10 tons, and the weight of a single plate is 100~350 pounds (about 45.4~158.8kg).

C11000 Electrolytic Tough Pitch (ETP) Copper Strip

C11000 electrolytic copper strip complies with the standards of many countries, as follows:

 

ASTM standard (USA)

 

ASTM B187: specifies the size, mechanical properties and chemical composition of copper bars and strips, with thickness customized to 4 inches (101.6mm) and width up to 4 inches (101.6mm).

 

SAE CA110: corresponds to UNS C11000, requiring copper purity ≥ 99.9%.

 

EN standard (Europe)

 

EN 1652: general plate and strip standard; EN 13599: copper strip for electrical purposes.

 

W004A: EN number corresponds to C11000, conductivity ≥100% IACS (International Annealed Copper Standard).

 

JIS standard (Japan)

 

C1100: Corresponds to C11000, thickness range 0.1mm~2.5mm, width ≤600mm, conductivity ≥98% IACS.

Chinese standard

 

GB/T 18813-2002: Copper strip for transformer, thickness 0.1mm~2.5mm, width ≤1000mm, copper purity ≥99.9%.

After the revision of the national standard "Copper Strip for Cables", except that the conductivity of T2 is slightly lower than that of the American standard C11000, other indicators are better than the ASTM standard.

1745569602774308794674147329.jpg

Common Product Forms & Dimensions

Product Form

Thickness/Diameter (mm)

Width (mm)

Length (mm)

Sheet/Strip

0.08 – 6.0

8.5 – 600

Custom

Rod

3.0 – 50.0

–

1000 – 6000

Wire

0.5 – 12.0

–

Custom

Tube

OD: 5.0 – 100.0

–

Custom

Custom dimensions available based on application requirements.

 

Density

8.89 g/cm³

Specific Heat

385 J/(kg・K)

Electrical Resistivity

1.67 μΩ・cm

Young's Modulus

111 GPa

Thermal Expansion

17.0×10-6/K

Thermal Conductivity

393 W/(m・K) (25℃)

Melting Point

1083℃

Magnetism

Non-magnetism

 

Copper C11000 Chemical Composition

Element

Cu + Ag

O

Sn

Zn

Pb

Fe

Others

Content

≥99.90%

≤0.06%

≤0.002%

≤0.005%

≤0.005%

≤0.005%

≤0.10%

Impurities (e.g., Bi, Sb, S) are strictly controlled to maintain conductivity and workability39.

 

C11000 Copper Specification

Physical Properties

Property

Value

Density (g/cm³)

8.9

Melting Point (°C)

1083

Thermal Conductivity (W/m·K)

394

Electrical Conductivity (% IACS)

100

Coefficient of Thermal Expansion (10⁻⁶/°C)

17.0 (20–300°C)

High purity ensures minimal resistance to electrical and thermal transfer.

 

Mechanical Properties

Condition

Tensile Strength (MPa)

Yield Strength (MPa)

Elongation (%)

Hardness (HRB)

Annealed (Soft)

220 – 275

180

45 – 50

35 – 45

Cold Worked (Hard)

275 – 345

250 – 300

5 – 10

60 – 80

Mechanical properties vary with processing methods (e.g., annealing or cold working).

 

Manufacturing Precision: Our Commitment to Quality

At GNEE Copper, we understand that raw material is only as good as its processing. A copper strip that is out of tolerance can damage your stamping dies. Here is how we control quality:

1. Precision Slitting (Tolerance Control)

We utilize advanced slitting lines to ensure:

Width Tolerance: As tight as ±0.05mm (or custom per request).

Thickness Tolerance: Controlled within ±0.005mm for high-precision strips.

2. Surface & Edge Quality

Burr-Free: We monitor the slitting knives to minimize burrs, protecting your insulation layers (crucial for transformer windings).

Clean Surface: Our degreasing process removes rolling oils, ensuring the strip is ready for plating (Tin, Nickel, or Silver) immediately upon arrival.

3. Customized Tempers

From Annealed (Soft) to Extra Spring Hard, we adjust the mechanical properties (Tensile Strength & Elongation) to match your specific forming requirements.

Copper coil Strip for transformer windings

C11000 electrolytic copper strip

FAQ About C11000 Copper Strip

Why is C11000 prone to hydrogen embrittlement?

A: Trace oxygen reacts with hydrogen in reducing atmospheres, forming water vapor that causes micro-cracks.

 

How does material C11000 compare to oxygen-free copper (OFHC)?

A: C11000 has slightly lower conductivity (~100% IACS vs. 101% for OFHC) but is more cost-effective for general applications.

 

Can C11000 be used for welding?

A: Yes, but avoid processes involving hydrogen (e.g., gas welding). Soldering or brazing is preferred.

 

Q: Can you provide Mill Test Certificates (MTC)?
A: Yes, every shipment from [Your Company Name] comes with a full MTC detailing the chemical composition, mechanical properties, and electrical conductivity test results.

 

Q: What is your MOQ (Minimum Order Quantity)?
A: We support our partners. While standard MOQ is [e.g., 50kg], we accept trial orders for prototyping.

Q: Do you offer plated copper strips?
A: Yes, we can provide Tin-plated (bright or matte) C11000 strips for enhanced solderability.

 

C10200 vs C11000 vs C12000 vs C12200 99.9% Pure Copper Strip C11000 C12000 C10200

Choosing the right grade can save you money and prevent failure. Here is a quick comparison:

C11000 (ETP): Best Value. High conductivity (101% IACS). Ideal for most electrical uses. Note: Not suitable for high-temperature brazing in hydrogen atmospheres due to hydrogen embrittlement.

C10100 (OFHC): Premium. Oxygen-free (99.99% Cu). Slightly higher cost. Required only if you are doing extensive welding or vacuum applications.

C12200 (DHP): Construction Grade. Good for plumbing and roofing but has lower conductivity. Avoid using this for high-precision electronics.

 

GB ISO ASTM JIS
TU1 Cu-OF C10200 C1020
T2 Cu-RTP C11000 C1100
TP1 Cu-DLP C12000 C1201
TP2 Cu-DHP C12200 C1220
GB Composition(%)
Cu P O Other
TU1 99.97 0.002 less than 0.002 balance
T2 99.9 – – balance
TP1 99.9 0.004-0.012 – balance
TP2 99.9 0.015-0.040 – balance
ASTM Composition(%)
Cu P O Other
C10200 99.95 0.001-0.005 – balance
C11000 99.9 – – balance
C12000 99.9 0.004-0.012 – balance
C12200 99.9 0.015-0.040 – balance
Grade(China) Grade(Japan) Temper Thickness/mm Tensile Strength Rm(N/mm2) Elongation A1 1.3% Hardness HV
T2 T3 TU1 TU2 TP1 TP2 C1100 C1020 C1220 O60 more than 0.15 no less than 195 no less than 30 no less than 70
H01 215-295 no less than 25 60-95
H02 245-345 no less than 8 80-110
H04 295-395 no less than 3 90-120
H06 no less than 350   no less than 110

 

Equivalent Alloy Specifications

Specification UNS BSI JIS ISO
Designation

C11000

C101

C 1100

Cu-ETP

Equivalent Standards

C11000 is recognized globally under various naming conventions:

UNS: C11000

ISO: Cu-ETP (CW004A)

JIS: C1100

ASTM: B152 (for strip/sheet), B187 (for bus bar)

 

Australian Product Specifications

Specification Product Form

AS1566

Rolled flat products

AS1567

Wrought rods, bars & sections

AS1568

Forging stock & forgings

AS1569

Seamless tubes for heat exchangers

AS1571

Seamless tubes for air conditioning & refrigeration

AS1572

Seamless tubes for engineering purposes

Other product specifications available on enquiry

 

 

ASTM Product Specifications

Number Title
B5

High Conductivity Tough Pitch Copper Refinery Shapes

B124

Copper and Copper Alloy Forging Rod, Bar and Shapes

B152

Copper Sheet, Strip, Plate, and Rolled Bar

B187

Copper Bar, Bus Bar, Rod and Shapes

B188

Seamless Copper Bus Pipe and Tube

B283

Copper and Copper Alloy Die Forgings (Hot Pressed)

B447

Welded Copper Tube

B577

Detection of cuprous Oxide (Hydrogen Embrittlement Susceptibility) in copper

B694

Copper, Copper Alloy and Copper Clad Stainless Steel (CCS) and Copper Clad Alloy Steel (CAS) and Strip for Electrical Cable Shielding

Mechanical Properties

AS1566, Sheet & Strip

Property Units Temper
Annealed* (soft) Half Hard Hard
Tensile Strength (min) MPa

210*

245

310

Elongation (min) %

40*

10

7

Hardness HV

55 max*

75-90

90-115

1. Properties marked * are typical, for information only
2. Other tempers are available for sufficient quantity on request

Finish Annealed or cold rolled to temper.

Availablilty Austral Wright Metals can supply this alloy in sheet, strip, coil, plate, circles, bar, sections, wire.

General Description Electrolytic tough pitch (ETP) copper, alloy 110, has excellent ductility and high electrical and thermal conductivity, higher than for any other copper metal except oxygen free grades such as C10200. The electrical conductivity is at least 100% IACS (0.5800 microhm?¹.cm?¹) and is often as high as 101.5% IACS. Electrical and heat exchanger uses are common.

The dominant use of this alloy is in electrical conductors. It is also used widely for gaskets, switches, terminals and connectors, transformers, electronic parts, ball floats, drawn and spun holloware.

Physical Properties

Property Metric Units Imperial Units

Melting Point (Liquidus)

1083°C

1981°F

Melting Point (Solidus, eutectic)

1065°C

1950°F

     

Density

8.89 gm/cm³ @ 20°C

0.301 lb/in³ @ 68°F

Specific Gravity

8.89

8.89

     

Coefficient of Thermal Expansion

17.7 x 10 -6 / °K (20-300°C)

9.8 x 10 -5 / °F (68-572°F)

Themal Conductivity

388 W/m. °K @ 20°C

224 BTU/ft³/ft/hr/°F @ 68°F

Thermal Capacity (Specific Heat)

385 J/kg. °K @ 20°C

0.092 BTU/lb/°F @ 68°F

     

Electrical Resistivity (Annealed)

1.724 microhm.cm @ 20°C

10.3 ohms (circ mil/ft) @ 68°F

Electrical Conductivity (Annealed)

0.58 - 0.59 microhm?¹.cm?¹ @ 20°C

100.0-101.5% IACS@ 68°F

     

Modulus of Elasticity (tension)

115 GPa

17 x 106 psi

Modulus of Rigidity (shear)

44 GPa

6.4 x 106 psi

Poisson's Ratio

0.33

0.33

Fabrication Properties

Cold Working Capacity

Excellent

Hot Working Capacity

Excellent

Hot Forging Rating

65% of forging brass

Hot Working Temperature

750-875°C

Annealing Temperature

375-650°C

Machinability Rating

20% of free cutting brass

Finishing

Excellent

Joining Properties

Soldering

Excellent

Brazing

Good

Oxy-Acetylene Welding

Not Recommended

Carbon Arc Welding

Fair

Gas Shielded Arc Welding (GTAW/TIG, GMAW/MIG)

Fair

Coated Metal Arc Welding (Manual electrodes)

Not Recommended

Resistance Welding

Not Recommended

 

C12000 C11000 C10100 1/4 1/2 Hard Copper Strip Coil

Specification

Product Name

Copper/Brass/Bronze alloy coil

Iterm

coil/strip

Material

C10100,C10200,C10300,C10400,C10500,C10700,C10800,C10910,C10920,C10930,
C11000,C11300,C11400,C11500,C11600,C12000,C12200,C12300,C12500,C14200,
C14420,C14500,C14510,C14520,C14530,C17200,C19200,C21000,C23000,C26000,
C27000,C27400,C28000,C33000,C33200,C37000,C44300,C44400,C44500,C60800,
C63000,C65500,C68700,C70400,C70600,C70620,C71000,C71500,C71520,C71640, C72200,C86300,C83600,C95400,C95500,C95800,
H59,62,H65,H68,H70,H80,H85,H90,H96, T1,T2,T3,TU1,TU0,TU2,TP1,TP2,TAg0.1,etc

Thickness

0.1-3mm or customized

Length

customized

Hardness

1/4 hard,1/2hard,full hard,soft,etc.

Surface

mill,polished,film-coated

Price Term

Ex-Work,FOB,CNF,CFR,CIF,FCA,DDP,DDU, etc

Payment Term

TT,L/C,etc

Package

Standard export package ,or as required.

Application

Brass bars are widely used in airconditioners,refrigerators,eclectrics due to its highly corrosion-resistant.It can be also used in structral parts

 
 
modular-1
Ready to Upgrade Your Supply Chain?

If you are looking for a reliable partner who understands both the chemistry of copper and the logistics of global trade, [Your Company Name] is here to help.

Hot Tags: c11000 copper strip, China c11000 copper strip manufacturers, suppliers, factory, copper, C27200 copper strip, copper C10100 tape, C12000 copper tape, C21000 copper strip for earthing, conductive C24000 copper tape, C26000 copper foil

Send Inquiry

whatsapp

Phone

E-mail

Inquiry